Design-Led Engineering Distributor

+44 (0) 1342 330 470

Motion Control

Isabellenhütte’s innovative solution for battery management system applications – the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand.

Magnetic sensors, digital isolators and low power switch sensors based on spintronic GMR (Giant Magnetoresistance) technology from NVE Corporation, including high temperature models.

Metal clad thick film and wirewould resistors from RARA, including inductive and non-inductive designs, braking resistors.

Range of short- and long sided thin film terminals from Susumu, including models with high power handling capacity, models suppressing the surface temperature and others.

Motion Control

PAD1

InterFET PAD1 N-Channel PicoAmp Diode with N0001H Geometry. Typical leakage of -0.5pA. All of this in a TO-18 package.

PAD1

PN4117

InterFET PN4117 N-Channel JFET with N0001H Geometry. Typical leakage of -1pA and a low input capacitance of 3pF (max). All of this in a TO-92 package.

PN4117

PN4117A

InterFET PN4117A N-Channel JFET with N0001H Geometry. Maximum leakage of -1pA and a low input capacitance of 3pF (max). All of this in a TO-92 package.

PN4117A

RARA FRH 25C

Metal clad thick film resistor
Resistance range from 1kΩ to 2MΩ
Max power rating of 15W
Cement moulding within aluminium housing
Short time overload of 2 x power rating is 5 seconds
High stability at conventional power ratings
Temperature range of -55°C up to +250°C

FRH25C

RARA FRH 50C

Metal clad thick film resistor
Resistance range from 1kΩ to 2MΩ
Max power rating of 25W
Cement moulding within aluminium housing
Short time overload of 2 x power rating is 5 seconds
High stability at conventional power ratings
Temperature range of -55°C up to +250°C

RARA FRH 50C

RARA IRB120

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 1.3kΩ
Non-inductive resistance between 0.1Ω and 300Ω
Power rating of 120W
Insulation resistance of 20MΩ minimum
Short time overload of 10 x power rating is 5 seconds

RARA IRB120

RARA IRB60

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 270Ω
Non-inductive resistance between 0.1Ω and 56Ω
Power rating of 60W
Insulation resistance of 20MΩ minimum
Short time overload of 5 x power rating is 5 seconds

RARA IRB60

RARA IRB80

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 910Ω
Non-inductive resistance between 0.1Ω and 110Ω
Power rating of 80W
Insulation resistance of 20MΩ minimum
Short time overload of 10 x power rating is 5 seconds

RARA IRB80

RARA IRF100

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.1kΩ
Power rating of 100W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF100

RARA IRF150

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.75kΩ
Power rating of 150W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF150

RARA IRF200

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 2.2kΩ
Power rating of 200W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF200

RARA IRF250

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 2.79kΩ
Power rating of 250W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF250

RARA IRF300

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 3.5kΩ
Power rating of 300W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF300

RARA IRF400

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 4.45kΩ
Power rating of 400W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF400

RARA IRF500

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 5.78kΩ
Power rating of 500W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF500

RARA IRH100

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium horizontal housing
Short time overload of 10 x power rating is 5 seconds

RARA IRH100

PAD1

InterFET PAD1 N-Channel PicoAmp Diode with N0001H Geometry. Typical leakage of -0.5pA. All of this in a TO-18 package.

PN4117

InterFET PN4117 N-Channel JFET with N0001H Geometry. Typical leakage of -1pA and a low input capacitance of 3pF (max). All of this in a TO-92 package.

PN4117A

InterFET PN4117A N-Channel JFET with N0001H Geometry. Maximum leakage of -1pA and a low input capacitance of 3pF (max). All of this in a TO-92 package.

RARA FRH 25C

Metal clad thick film resistor
Resistance range from 1kΩ to 2MΩ
Max power rating of 15W
Cement moulding within aluminium housing
Short time overload of 2 x power rating is 5 seconds
High stability at conventional power ratings
Temperature range of -55°C up to +250°C

RARA FRH 50C

Metal clad thick film resistor
Resistance range from 1kΩ to 2MΩ
Max power rating of 25W
Cement moulding within aluminium housing
Short time overload of 2 x power rating is 5 seconds
High stability at conventional power ratings
Temperature range of -55°C up to +250°C

RARA IRB120

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 1.3kΩ
Non-inductive resistance between 0.1Ω and 300Ω
Power rating of 120W
Insulation resistance of 20MΩ minimum
Short time overload of 10 x power rating is 5 seconds

RARA IRB60

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 270Ω
Non-inductive resistance between 0.1Ω and 56Ω
Power rating of 60W
Insulation resistance of 20MΩ minimum
Short time overload of 5 x power rating is 5 seconds

RARA IRB80

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 910Ω
Non-inductive resistance between 0.1Ω and 110Ω
Power rating of 80W
Insulation resistance of 20MΩ minimum
Short time overload of 10 x power rating is 5 seconds

RARA IRF100

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.1kΩ
Power rating of 100W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF150

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.75kΩ
Power rating of 150W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF200

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 2.2kΩ
Power rating of 200W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF250

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 2.79kΩ
Power rating of 250W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF300

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 3.5kΩ
Power rating of 300W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF400

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 4.45kΩ
Power rating of 400W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF500

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 5.78kΩ
Power rating of 500W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRH100

Metal clad wire wound resistor
Option of flying leads (tab terminals are standard)
Inductive or non-inductive design
Insulation resistance of 20MΩ minimum
Temperature range of -55°C up to +200°C
Extruded aluminium horizontal housing
Short time overload of 10 x power rating is 5 seconds

Resources

Related Articles