- Ultra-precision power resistor
- Resistance range form 0.1Ω to 10kΩ
- Tolerance from ±0.02% to ±5%
- TCR of ±2.5 ppm/°C, ±5 ppm/°C or ±15 ppm/°C
- Power rating of upto 8W (on a heat sink at 25°C)
- Temperature range from -55°C up to +155°C
Menu
8W
- Precision high voltage through-hole resistor
- Maximum operating voltage from 600V up to 30kV (standard series)
- Utilises Caddock’s Micronox® resistance film for outstanding combination of performance
- MG resistors have demonstrated stability of 0.01% per 1,000 hours in extended load life testing of standard resistance range
- -15 series increases the maximum voltage ratings by 60% (48kV for the MG815 model)
- Extended resistance range avilable on some models
- Precision high temperature power axial leaded through-hole resistor
- Maximum operating voltage up to 6kV
- Maximum operating temperature up to +275°C
- Utilises Caddock’s Micronox® resistance film for outstanding stability when exposed to a high ambient temperature, thermal shock and high power densities
- MS resistors have demonstrated excellent long-term stability of 0.05% per 1,000 hours over extended life
- Caddock’s non-inductive design available on some models
- 4-terminal current sensing resistor
- Resistance range from 0.0002Ω to 0.003Ω
- Tolerance ±1.0% or ±5.0%
- TCR of <20 ppm/K or <50 ppm/K
- Power rating up to 12W (at 70°C)
- Temperature range from -65°C to +170°C
- Current sensing resistor
- Resistance range from 0.0002Ω to 0.003Ω
- Tolerances of ±1.0% and ±5.0%
- TCR value from ±50 ppm/K
- Power rating up to 12W (at 70°C)
- Temperature range from -65°C to +170°C
- Current sensing resistor
- Resistance range from 0.000525Ω to 0.003Ω
- Tolerances of ±1.0%, ±2.0% and ±5.0%
- TCR as low as <60 ppm/K
- Power rating up to 13W at +70°C
- Temperature range from -65°C to +170°C
- Precision high voltage axial resistors
- Resistance range from 100kΩ to 50GΩ
- Tolerances from ±0.1% to ±20%
- TCR of ±50 ppm/°C, ±100 ppm/°C or ±200 ppm/°C
- Voltage rating of 40kV
- Temperature range from -55°C to +225°C
- Metal clad thick film resistor
- Insulation resistance of 20MΩ minimum
- Temperature range of -15°C up to +105°C
- Cement moulding within aluminium housing
- Short time overload of 2 x power rating is 5 seconds
- High stability at conventional power ratings
- Mounts on chassis to utilise heat sink effect
- Metal clad wire wound resistor
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +250°C
- Cement moulding within aluminium housing
- Short time overload of 5 x power rating is 5 seconds
- High stability at conventional power ratings
- Mounts on chassis to utilise heat sink effect
Manufacturers
Looking for 8W?
The below manufacturers are all of our authorised partners that produce 8W or related products.
