+44 (0)1342 330 470

EV & Automotive

Thanks to our portfolio of industry-leading manufacturers, we are able to offer a wide selection of AEC-Q200 compliant resistors as well as some AEC-Q100 qualified sensors.

Our resistor range developed for automotive applications such as electric vehicle charging and battery management systems includes a selection of high-quality current sensing resistors and shunts by Isabellenhütte in addition to a variety of thin-film and metal-foil chip resistors by Susumu which are compliant to the automotive AEC-Q200 standard.

We also offer a range of sensor products meeting AEC-Q100 qualifications including foil thermocouple temperature sensors by RdF, pressure sensors by Merit Sensor, load cells from Stellar Technology and NVE’s smart magnetometer based on their TMR technology.

The IVT-S module from Isabellenhütte, is an innovative solution for battery management system applications. This plug-and-play sensor is ideal for precise current and voltage measurement and is widely used within the automotive industry.

EV & Automotive

RdF 22810 Series

Polyimide insulated flexible RTD Stikon® temperature sensor
Standard sensing element is platinum with a resistance of 100Ω at 0°C
3 or 4 conductor ribbon cable
Customisible cable lengths

RdF 22810

RdF 26721 Series

Stikon® type E thermocouple
Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
2 wire configuration
Kapton® case material
Embeded in a paper thin laminate

RdF 26721

RdF 26722 Series

Stikon® type E thermocouple
Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
2 wire configuration
Kapton® case material
Embeded in a paper thin laminate

RdF 26722

RdF 26723 Series

Stikon® type K thermocouple
Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
2 wire configuration
Kapton® case material
Embeded in a paper thin laminate

RdF 26723

RdF 26724 Series

Stikon® type J thermocouple
Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
2 wire configuration
Kapton® case material
Embeded in a paper thin laminate

RdF 26724

RdF 29230 Series

Surface platinum RTD temperature sensor
Temperature range -200°C to +260°C
Time constant of <0.3s on metal surfaces
100 ±0.12Ω or 1000 ±1.2Ω at 0°C (International Class B)
Long term stability <0.05°C per 5 years
2 or 3 wire configuration options available

RdF 29230

RdF 29309 Series

Surface platinum RTD temperature sensor
Temperature range -200°C to +260°C
Time constant of <0.3s on metal surfaces
100 ±0.12Ω or 1000 ±1.2Ω at 0°C (International Class B)
Long term stability <0.05°C per 5 years
4 Wire configuration

RdF 29309

Resi APLR Series

High energy anti-pulse resistor with up to 1000J capability, 6W power rating and non-inductive design for high-voltage and transient applications.

APLR1000XXXXXSX

Resi ARCS6918-L050

High-current shunt sensing module with 50µΩ resistance, 700A rating and low thermal EMF for accurate current measurement in power electronics systems.

ARCS6918XL050XX

Resi HRES6918BL025MST0

High-precision shunt current sensing module with 25µΩ resistance, 600A rated current and 15mV output for BMS, ESS, EV and eVTOL applications.

HRES6918BL025MST0

Resi HVLR Series

High voltage thick film resistor with up to 48kV operating voltage, 1kΩ to 1GΩ resistance range and axial mounting for reliable HV circuit design.

HVLRXXXXXXXXXKX

Resi PTFR Series

Precision thin film chip resistor with 10Ω to 5.1MΩ range, tolerance down to ±0.01% and TCR as low as ±5ppm/℃ for high-stability SMD circuits.

PTFRXXXXXXXXXXX

Resi SOTC0227 Series

High power thick film resistor with up to 300W rating, wide resistance range and robust SMD design for load, regulation and high-energy applications.

SOTC0227XXXXXKX

Resi SRES6918BL100VST0

High-precision shunt current sensing module with 100µΩ resistance, 400A current rating and ±0.1% accuracy for EV, BMS and energy storage systems.

SRES6918BL100VST0

SRT Microcéramique Chip Capacitors with Negative TC

NP0 (C0G) Chip ceramic capacitor with negative TC
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kH (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique High Frequency Capacitor Series

MLCC Capacitor for RF and Microwave communication
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

RdF 22810 Series

Stikon® Flexible Surface RTD Temperature Sensors

Polyimide insulated flexible RTD Stikon® temperature sensor
Standard sensing element is platinum with a resistance of 100Ω at 0°C
3 or 4 conductor ribbon cable
Customisible cable lengths

RdF 26721 Series

Stikon® Surface Temperature Sensors

Stikon® type E thermocouple
Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
2 wire configuration
Kapton® case material
Embeded in a paper thin laminate

RdF 26722 Series

Stikon® Surface Temperature Sensors

Stikon® type E thermocouple
Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
2 wire configuration
Kapton® case material
Embeded in a paper thin laminate

RdF 26723 Series

Stikon® Surface Temperature Sensors

Stikon® type K thermocouple
Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
2 wire configuration
Kapton® case material
Embeded in a paper thin laminate

RdF 26724 Series

Stikon® Surface Temperature Sensors

Stikon® type J thermocouple
Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
2 wire configuration
Kapton® case material
Embeded in a paper thin laminate

RdF 29230 Series

Surface Platinum RTD Temperature Sensors

Surface platinum RTD temperature sensor
Temperature range -200°C to +260°C
Time constant of <0.3s on metal surfaces
100 ±0.12Ω or 1000 ±1.2Ω at 0°C (International Class B)
Long term stability <0.05°C per 5 years
2 or 3 wire configuration options available

RdF 29309 Series

Surface Platinum RTD Temperature Sensors

Surface platinum RTD temperature sensor
Temperature range -200°C to +260°C
Time constant of <0.3s on metal surfaces
100 ±0.12Ω or 1000 ±1.2Ω at 0°C (International Class B)
Long term stability <0.05°C per 5 years
4 Wire configuration

Resi APLR Series

High energy anti-pulse resistor

High energy anti-pulse resistor with up to 1000J capability, 6W power rating and non-inductive design for high-voltage and transient applications.

Resi ARCS6918-L050

High-Precision Shunt Based Current Sensing Module

High-current shunt sensing module with 50µΩ resistance, 700A rating and low thermal EMF for accurate current measurement in power electronics systems.

Resi HRES6918BL025MST0

High-Precision Shunt Based Current Sensing Module

High-precision shunt current sensing module with 25µΩ resistance, 600A rated current and 15mV output for BMS, ESS, EV and eVTOL applications.

Resi HVLR Series

Planar Non-inductive Power Resistor

High voltage thick film resistor with up to 48kV operating voltage, 1kΩ to 1GΩ resistance range and axial mounting for reliable HV circuit design.

Resi PTFR Series

High-Stability Precision Thin Film Chip Resistor

Precision thin film chip resistor with 10Ω to 5.1MΩ range, tolerance down to ±0.01% and TCR as low as ±5ppm/℃ for high-stability SMD circuits.

Resi SOTC0227 Series

Planar Non-inductive Power Resistor

High power thick film resistor with up to 300W rating, wide resistance range and robust SMD design for load, regulation and high-energy applications.

Resi SRES6918BL100VST0

High-Precision Shunt Based Current Sensing Module

High-precision shunt current sensing module with 100µΩ resistance, 400A current rating and ±0.1% accuracy for EV, BMS and energy storage systems.

SRT Microcéramique Chip Capacitors with Negative TC

SRT Microcéramique Chip Capacitors with Negative TC

NP0 (C0G) Chip ceramic capacitor with negative TC
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kH (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Frequency Capacitor Series

SRT Microcéramique High Frequency Capacitor

MLCC Capacitor for RF and Microwave communication
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Resources

Related Articles