Design-Led Engineering Distributor

+44 (0) 1342 330 470

Motion Control

Isabellenhütte’s innovative solution for battery management system applications – the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand.

Magnetic sensors, digital isolators and low power switch sensors based on spintronic GMR (Giant Magnetoresistance) technology from NVE Corporation, including high temperature models.

Metal clad thick film and wirewould resistors from RARA, including inductive and non-inductive designs, braking resistors.

Range of short- and long sided thin film terminals from Susumu, including models with high power handling capacity, models suppressing the surface temperature and others.

Motion Control

Isabellenhütte SMS-R000 Series

Zero ohm jumper / power bridge
2-terminal surface-mount design in a 2512 chip size
Resistance value of <200µΩ
Power rating of 2W (at +120°C)
Current rating of up to 100A DC
Temperature range from -65°C to +170°C

Isabellenhütte SMS-R000

Isabellenhütte SMT Series

Current sensing precision resistor
2-terminal surface-mount 2817 chip size
Resistance range from 0.004Ω to 4.7Ω
Tolerance range from ±0.5% to ±5%
TCR from <±50 ppm/°C
Power rating of 5W (at +105°C)
Temperature range -65°C to +170°C

Isabellenhütte SMT Series

Isabellenhütte VMI-R000 Series

Zero ohm jumper / Power bridge
Surface-mount design in a 0805 chip size
Resistance value of <200µΩ
TCR of 3200 ±500 ppm/°C
Constant current of up to 35A DC
Power rating of 0.25W (at +170°C)
Temperature range from -65°C to +170°C

Isabellenhütte VMI-R000

J108

InterFET J108 N-Channel JFET with N0450S Geometry. Typical leakage of -6pA and a low input capacitance of 85pF (max). All of this in a TO-92 package.

J108

J112

InterFET J112 N-Channel JFET with N0132S Geometry. Typical leakage of -4pA and a low input capacitance of 28pF (max). All of this in a TO-92 package.

J112

J174

InterFET J174 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 32pF (max). All of this in a TO-92 package.

J174

J175

InterFET J175 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 32pF (max). All of this in a TO-92 package.

J175

J177

InterFET J177 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 32pF (max). All of this in a TO-92 package.

J177

J201

InterFET J201 N-Channel JFET with N0016H Geometry. Typical leakage of -1.5pA and a low input capacitance of 4pF (max). All of this in a TO-92 package.

J201

J202

InterFET J202 N-Channel JFET with N0016H Geometry. Typical leakage of -1.5pA and a low input capacitance of 4pF (max). All of this in a TO-92 package.

J202

J204

InterFET J204 N-Channel JFET with N0016H Geometry. Typical leakage of -1.5pA and a low input capacitance of 4pF (max). All of this in a TO-92 package.

J204

J230

InterFET J230 N-Channel JFET with N0016H Geometry. Typical leakage of -1.5pA and a low input capacitance of 4pF (max). All of this in a TO-92 package.

J230

J231

InterFET J231 N-Channel JFET with N0016H Geometry. Typical leakage of -1.5pA and a low input capacitance of 4pF (max). All of this in a TO-92 package.

J231

J232

InterFET J232 N-Channel JFET with N0016H Geometry. Typical leakage of -1.5pA and a low input capacitance of 4pF (max). All of this in a TO-92 package.

J232

J270

InterFET J270 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 30pF (max). All of this in a TO-92 package.

J270

J271

InterFET J271 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 30pF (max). All of this in a TO-92 package.

J271

Isabellenhütte SMS-R000 Series

Zero ohm jumper / power bridge
2-terminal surface-mount design in a 2512 chip size
Resistance value of <200µΩ
Power rating of 2W (at +120°C)
Current rating of up to 100A DC
Temperature range from -65°C to +170°C

Isabellenhütte SMT Series

Current sensing precision resistor
2-terminal surface-mount 2817 chip size
Resistance range from 0.004Ω to 4.7Ω
Tolerance range from ±0.5% to ±5%
TCR from <±50 ppm/°C
Power rating of 5W (at +105°C)
Temperature range -65°C to +170°C

Isabellenhütte VMI-R000 Series

Zero ohm jumper / Power bridge
Surface-mount design in a 0805 chip size
Resistance value of <200µΩ
TCR of 3200 ±500 ppm/°C
Constant current of up to 35A DC
Power rating of 0.25W (at +170°C)
Temperature range from -65°C to +170°C

J108

InterFET J108 N-Channel JFET with N0450S Geometry. Typical leakage of -6pA and a low input capacitance of 85pF (max). All of this in a TO-92 package.

J112

InterFET J112 N-Channel JFET with N0132S Geometry. Typical leakage of -4pA and a low input capacitance of 28pF (max). All of this in a TO-92 package.

J174

InterFET J174 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 32pF (max). All of this in a TO-92 package.

J175

InterFET J175 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 32pF (max). All of this in a TO-92 package.

J177

InterFET J177 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 32pF (max). All of this in a TO-92 package.

J201

InterFET J201 N-Channel JFET with N0016H Geometry. Typical leakage of -1.5pA and a low input capacitance of 4pF (max). All of this in a TO-92 package.

J202

InterFET J202 N-Channel JFET with N0016H Geometry. Typical leakage of -1.5pA and a low input capacitance of 4pF (max). All of this in a TO-92 package.

J204

InterFET J204 N-Channel JFET with N0016H Geometry. Typical leakage of -1.5pA and a low input capacitance of 4pF (max). All of this in a TO-92 package.

J230

InterFET J230 N-Channel JFET with N0016H Geometry. Typical leakage of -1.5pA and a low input capacitance of 4pF (max). All of this in a TO-92 package.

J231

InterFET J231 N-Channel JFET with N0016H Geometry. Typical leakage of -1.5pA and a low input capacitance of 4pF (max). All of this in a TO-92 package.

J232

InterFET J232 N-Channel JFET with N0016H Geometry. Typical leakage of -1.5pA and a low input capacitance of 4pF (max). All of this in a TO-92 package.

J270

InterFET J270 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 30pF (max). All of this in a TO-92 package.

J271

InterFET J271 P-Channel JFET with P0099F Geometry. Typical leakage of 5pA and a low input capacitance of 30pF (max). All of this in a TO-92 package.

Resources

Related Articles