+44 (0) 1342 330 470

Motion Control

Isabellenhütte’s innovative solution for battery management system applications – the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand.

Magnetic sensors, digital isolators and low power switch sensors based on spintronic GMR (Giant Magnetoresistance) technology from NVE Corporation, including high temperature models.

Metal clad thick film and wirewould resistors from RARA, including inductive and non-inductive designs, braking resistors.

Range of short- and long sided thin film terminals from Susumu, including models with high power handling capacity, models suppressing the surface temperature and others.

Motion Control

NVE IL816T-3E

High speed, High-Temperature, DC-correct digital isolators
Multidirectional four channel isolation
High speed at 110 Mbps typical
2.5kV_RMS isolation voltage
600 V_RMS working voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
0.0013 A/channel typical quiescent current
2ns typical pulse width distortion (with 5V supply)
3ns channel-to-channel skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.15″ SOIC package

NVE IL816TE

High speed, High-Temperature, DC-correct digital isolators
Multidirectional four channel isolation
High speed at 110 Mbps typical
2.5kV_RMS isolation voltage
600 V_RMS working voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
0.0013 A/channel typical quiescent current
2ns typical pulse width distortion (with 5V supply)
3ns channel-to-channel skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.3″ SOIC package

NVE IL817T-3E

High speed, High-Temperature, DC-correct digital isolators
Multidirectional four channel isolation (3 transmit, 1 receive)
High speed at 110 Mbps typical
2.5kV_RMS isolation voltage
600 V_RMS working voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
0.0013 A/channel typical quiescent current
2ns typical pulse width distortion (with 5V supply)
3ns channel-to-channel skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.15″ SOIC package

NVE IL817TE

High speed, High-Temperature, DC-correct digital isolators
Multidirectional four channel isolation (3 transmit, 1 receive)
High speed at 110 Mbps typical
2.5kV_RMS isolation voltage
600 V_RMS working voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
0.0013 A/channel typical quiescent current
2ns typical pulse width distortion (with 5V supply)
3ns channel-to-channel skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.3″ SOIC package

NVE IL821T-3E

High speed, High-Temperature, DC-correct digital isolators
Multidirectional two channel isolation
High speed at 110 Mbps typical
2.5kV_RMS isolation voltage
600 V_RMS working voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
0.0013 A/channel typical quiescent current
2ns typical pulse width distortion (with 5V supply)
3ns channel-to-channel skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
8-pin SOIC package

NVE IL821TE

High speed, High-Temperature, DC-correct digital isolators
Multidirectional two channel isolation
High speed at 110 Mbps typical
2.5kV_RMS isolation voltage
600 V_RMS working voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
0.0013 A/channel typical quiescent current
2ns typical pulse width distortion (with 5V supply)
3ns channel-to-channel skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.3″ SOIC package

RARA FRH 25C

Metal clad thick film resistor
Resistance range from 1kΩ to 2MΩ
Max power rating of 15W
Cement moulding within aluminium housing
Short time overload of 2 x power rating is 5 seconds
High stability at conventional power ratings
Temperature range of -55°C up to +250°C

RARA FRH 50C

Metal clad thick film resistor
Resistance range from 1kΩ to 2MΩ
Max power rating of 25W
Cement moulding within aluminium housing
Short time overload of 2 x power rating is 5 seconds
High stability at conventional power ratings
Temperature range of -55°C up to +250°C

RARA IRB60

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 270Ω
Non-inductive resistance between 0.1Ω and 56Ω
Power rating of 60W
Insulation resistance of 20MΩ minimum
Short time overload of 5 x power rating is 5 seconds

RARA IRB80

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 910Ω
Non-inductive resistance between 0.1Ω and 110Ω
Power rating of 80W
Insulation resistance of 20MΩ minimum
Short time overload of 10 x power rating is 5 seconds

RARA IRB120

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 1.3kΩ
Non-inductive resistance between 0.1Ω and 300Ω
Power rating of 120W
Insulation resistance of 20MΩ minimum
Short time overload of 10 x power rating is 5 seconds

RARA IRF100

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.1kΩ
Power rating of 100W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF150

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.75kΩ
Power rating of 150W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF200

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 2.2kΩ
Power rating of 200W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF250

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 2.79kΩ
Power rating of 250W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF300

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 3.5kΩ
Power rating of 300W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

NVE IL816T-3E

High speed, High-Temperature, DC-correct digital isolators
Multidirectional four channel isolation
High speed at 110 Mbps typical
2.5kV_RMS isolation voltage
600 V_RMS working voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
0.0013 A/channel typical quiescent current
2ns typical pulse width distortion (with 5V supply)
3ns channel-to-channel skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.15″ SOIC package

NVE IL816TE

High speed, High-Temperature, DC-correct digital isolators
Multidirectional four channel isolation
High speed at 110 Mbps typical
2.5kV_RMS isolation voltage
600 V_RMS working voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
0.0013 A/channel typical quiescent current
2ns typical pulse width distortion (with 5V supply)
3ns channel-to-channel skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.3″ SOIC package

NVE IL817T-3E

High speed, High-Temperature, DC-correct digital isolators
Multidirectional four channel isolation (3 transmit, 1 receive)
High speed at 110 Mbps typical
2.5kV_RMS isolation voltage
600 V_RMS working voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
0.0013 A/channel typical quiescent current
2ns typical pulse width distortion (with 5V supply)
3ns channel-to-channel skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.15″ SOIC package

NVE IL817TE

High speed, High-Temperature, DC-correct digital isolators
Multidirectional four channel isolation (3 transmit, 1 receive)
High speed at 110 Mbps typical
2.5kV_RMS isolation voltage
600 V_RMS working voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
0.0013 A/channel typical quiescent current
2ns typical pulse width distortion (with 5V supply)
3ns channel-to-channel skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.3″ SOIC package

NVE IL821T-3E

High speed, High-Temperature, DC-correct digital isolators
Multidirectional two channel isolation
High speed at 110 Mbps typical
2.5kV_RMS isolation voltage
600 V_RMS working voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
0.0013 A/channel typical quiescent current
2ns typical pulse width distortion (with 5V supply)
3ns channel-to-channel skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
8-pin SOIC package

NVE IL821TE

High speed, High-Temperature, DC-correct digital isolators
Multidirectional two channel isolation
High speed at 110 Mbps typical
2.5kV_RMS isolation voltage
600 V_RMS working voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
0.0013 A/channel typical quiescent current
2ns typical pulse width distortion (with 5V supply)
3ns channel-to-channel skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.3″ SOIC package

RARA FRH 25C

Metal clad thick film resistor
Resistance range from 1kΩ to 2MΩ
Max power rating of 15W
Cement moulding within aluminium housing
Short time overload of 2 x power rating is 5 seconds
High stability at conventional power ratings
Temperature range of -55°C up to +250°C

RARA FRH 50C

Metal clad thick film resistor
Resistance range from 1kΩ to 2MΩ
Max power rating of 25W
Cement moulding within aluminium housing
Short time overload of 2 x power rating is 5 seconds
High stability at conventional power ratings
Temperature range of -55°C up to +250°C

RARA IRB60

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 270Ω
Non-inductive resistance between 0.1Ω and 56Ω
Power rating of 60W
Insulation resistance of 20MΩ minimum
Short time overload of 5 x power rating is 5 seconds

RARA IRB80

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 910Ω
Non-inductive resistance between 0.1Ω and 110Ω
Power rating of 80W
Insulation resistance of 20MΩ minimum
Short time overload of 10 x power rating is 5 seconds

RARA IRB120

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 1.3kΩ
Non-inductive resistance between 0.1Ω and 300Ω
Power rating of 120W
Insulation resistance of 20MΩ minimum
Short time overload of 10 x power rating is 5 seconds

RARA IRF100

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.1kΩ
Power rating of 100W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF150

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.75kΩ
Power rating of 150W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF200

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 2.2kΩ
Power rating of 200W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF250

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 2.79kΩ
Power rating of 250W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA IRF300

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 3.5kΩ
Power rating of 300W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

Resources

Related Articles

Select at least 2 products
to compare