Renewables

We have designed various sensors and components for some of the largest renewable energy companies around as well as also helped with small startup companies investigating Wind, Wave and Tidal renewable projects. Whether you need a sensor to monitor hydraulic spikes or a braking resistor to help with turbine dumped energy, we are here to help.

2N6550

N-Channel JFET

InterFET 2N6550 N-Channel JFET with N0450L Geometry. Typical leakage of -6pA and a low input capacitance of 35pF (max). All of this in a TO-46 package.

Core Sensors CS15 Series

Non-Clogging Submersible Pressure Transducer

Non-Clogging submersible pressure transducer
Pressure ranges from 2 PSI to 50 PSI
Flush diaphragm prevents clogging
Hastelloy C276 diaphragm material
IP68 rated
Operating temperature of -40 to +85°C
Compensated temperatures from 0 to +55°C

Core Sensors CS50 Series

Non-Incendive Pressure Transducer

Non-incendive pressure transducer
Pressure ranges from 50 PSI to 30,000 PSI
Accuracy of ≤±0.25% BFSL at 25°C
Stability of ≤±0.25% of FS
Pressure cycles of 100 million
Overpressure of 2x minimum
Burst pressure of 5x or 60,000 PSI

Core Sensors CS51 Series

Non-Incendive Low Pressure Transducer

Non-incendive low pressure transducer
Pressure ranges from 1 PSI up to 49 PSI
Temperature range from −20°C up to +80°C *
Accuracy of ≤±0.25% BFSL at 25°C **
Stability of ≤±0.25% of FS (1 year)
Pressure cycles of 100 million
Overpressure of 2x minimum

Core Sensors CS54 Series

Non-Incendive Differential Pressure Transducer

Non-Incendive Differential Pressure Transducer
Differential pressure up to 50 PSI
Line pressure up to 500 PSI
Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below)
Overpressure of 2X or 500 PSI (whichever is less)
Temperature range −40°C to +80°C
Media temperature of -40 to +125°C

Core Sensors CS60 Series

Explosion-Proof Pressure Transducer

Explosion-Proof Pressure Transducer
Pressure ranges from 50 PSI to 30,000 PSI
One piece diaphragm design – No internal O-rings or welds
Factory sealed stainless steel case – Withstands harsh environments
Accuracy of ≤±0.25% BFSL at 25°C (<10,000 PSI)
Pressure cycles of 100 million
Overpressure of 2x minimum

Coto 9105 Series

High-Voltage Reed Relay (SMD & DIP)

High-voltage reed relay available in SMD and DIP packages
Switching voltage up to 1,000 V
Breaking voltage up to 4.25 kV
Dielectric strength up to 7 kV
Hermetically sealed contacts for long operating life
Optional coil suppression diode for circuit protection

DPAD1

Dual PicoAmp Diode

InterFET DPAD1 N-Channel Dual PicoAmp Diode with N0001H Geometry. Typical leakage of -0.5pA. All of this in a TO-72 package.

IF1320ST3

N-Channel JFET

InterFET IF1320ST3 N-Channel JFET with N0132L Geometry. Typical leakage of -4pA and a low input capacitance of 20pF (max). All of this in a SOT-23 package.

IF1322AS08

N-Channel JFET

InterFET IF1322AS08 N-Channel Dual Matched JFET with N0132L Geometry. Typical leakage of -4pA and a low input capacitance of 15pF (max). All of this in a SOIC-8 package.

IF1322S08

N-Channel JFET

InterFET IF1322S08 N-Channel Dual Matched JFET with N0132L Geometry. Typical leakage of -4pA and a low input capacitance of 15pF (max). All of this in a SOIC-8 package.

IF140AST3

N-Channel JFET

InterFET IF140AST3 N-Channel JFET with N0014L Geometry. Typical leakage of -1pA and a low input capacitance of 3pF (max). All of this in a SOT-23 package.

IF140AT72

N-Channel JFET

InterFET IF140AT72 N-Channel JFET with N0014L Geometry. Typical leakage of -1pA and a low input capacitance of 3pF (max). All of this in a TO-72 package.

IF140ST3

N-Channel JFET

InterFET IF140ST3 N-Channel JFET with N0014L Geometry. Typical leakage of -1pA and a low input capacitance of 3pF (max). All of this in a SOT-23 package.

IF170AST3

N-Channel JFET

InterFET IF170AST3 N-Channel JFET with N0132L Geometry. Typical leakage of -4pA and a low input capacitance of 20pF (max). All of this in a SOT-23 package.

IF170BST3

N-Channel JFET

InterFET IF170BST3 N-Channel JFET with N0132L Geometry. Typical leakage of -4pA and a low input capacitance of 20pF (max). All of this in a SOT-23 package.

Resources

Coto Technology - Testing Reed Relays and Reed Switches for Reliability

Audio

Energy & Power Systems

EV & Automotive

Healthcare & Medical

Industrial & Automation

Military & Defence

Oil & Gas

Renewables

Space

Renewables

N-Channel JFET

Non-Clogging Submersible Pressure Transducer

Non-Incendive Pressure Transducer

Non-Incendive Low Pressure Transducer

Non-Incendive Differential Pressure Transducer

Explosion-Proof Pressure Transducer

High-Voltage Reed Relay (SMD & DIP)

Dual PicoAmp Diode

N-Channel JFET

N-Channel JFET

N-Channel JFET

N-Channel JFET

N-Channel JFET

N-Channel JFET

N-Channel JFET

N-Channel JFET

Resources

Related Articles