Differential Pressure Sensors

Differential Pressure Sensors
Show:
Sort By:

Core Sensors CS14 series

The CS14 wet/wet differential pressure transducer series from Core Sensors is designed for various applications including filtration and tank monitoring. The options include differential pressure ranges of up to 300 PSI, both male and female 1/4” NPT process connections, choice of voltage and 4-20mA loop powered output signals. The CS14 from Core comes with a 316L SS oil filled sensor element which provides excellent stability over a wide operating temperature range of −40°C to +105°C while offering corrosion resistance against various liquids and gases by offering a robust package with an accuracy of ≤ ±0.4% BFSL. The compact designs makes it a perfect solution for differential measurement applications in confined spaces.

  • Wet/wet differential pressure transducer
  • Differential pressure range of up to 300 PSI
  • Maximum line pressure of 500 PSI
  • Operating temperature −40°C to +105°C
  • Accuracy of ≤ ±0.4% BFSL
  • Burst pressure of 3x rated differential pressure
  • Stability (1 year) of ≤ ±0.25% of FS
  • Pressure cycles of 4 million
  • Electrical output options of 4-20mA, 1-5V(3 wire), 0-5V (3 wire) or 0.5-4.5V ratiometric
  • 316L SS diaphragm / oil filled sensor element
  • Both male and female 1/4” NPT process connections

Potential applications for the Core CS14 series include:

  • Filtration
  • Cryogenic bulk tank level measurement
  • Tank level monitoring

Please see the below performance and thermal tables for the Core CS14 series:

Core CS14 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability
**Max line pressure is the highest equal common mode pressure that can be applied to the sensor without damage.
***Overpressure and burst pressure are the maximum differential pressure that can be applied to the high or low side before damage to the sensor will occur.
****IP Rating is dependent on electrical termination selected. Please contact us for more information.

£0.00 Ex Tax: £0.00

Core Sensors CS84 series

The CS84 intrinsically safe differential pressure transducer series from Core Sensors is designed for various applications in hazardous areas with CSA and ABS approvals. The options include differential pressure ranges of up to 50 PSI, with 1/4” NPT or FNPT process connections and a choice of electrical outputs. The CS84 from Core comes with a 316L SS oil filled sensor element which provides excellent stability over a wide operating temperature range of −40°C to +80°C while offering corrosion resistance against various liquids and gases by offering a robust package with an accuracy of ≤ ±0.4% BFSL. The compact designs makes it a perfect solution for differential measurement applications in confined spaces.

  • Intrinsically safe differential pressure transducer
  • Differential pressure range of up to 50 PSI
  • Maximum line pressure of 500 PSI
  • Operating temperature −40°C to +80°C
  • Accuracy of ≤ ±0.4% BFSL
  • Burst pressure of 3x rated differential pressure
  • Stability (1 year) of ≤ ±0.25% of FS
  • Pressure cycles of 4 million
  • Electrical output options of 4-20mA, 1-5V, 1-6V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
  • 316L SS diaphragm / oil filled sensor element
  • 1/4” NPT or FNPT process connections

Approvals for the Core CS84 series include:

  • CSA Class I, division 1, groups C, D T4 
  • Class I, zone 0 AEx ia IIB T4 Ga; Ex ia IIB T4 Ga
  • ABS (American bureau of shipping)

Potential applications for the Core CS84 series include:

  • Filtration
  • Cryogenic bulk tank level measurement
  • External fuel tank level measurement
  • Compression systems
  • Test stands

Please see the below performance and thermal tables for the Core CS84 series:

Core CS84 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability
**Max line pressure is the highest equal common mode pressure that can be applied to the sensor without damage.
***Overpressure and burst pressure are the maximum differential pressure that can be applied to the high or low side before damage to the sensor will occur. Please contact us for more information.

£0.00 Ex Tax: £0.00

Emerson Paine™ 210-60-090 Series

The Paine™ 210-60-090 differential pressure transducer series from Emerson offers measuring pressure ranges from ±500 PSID up to ±5000 PSID all in a small size. The 210-60-090 from Emerson is built with two separate sensing elements to measure the pressure at the input ports. This device has a very low thermal shift of ±0.01% of full scale per °C in the toughest environments and provides a differential output along with a uniquely small design. This transducer series is ideal for measuring differential pressure in many applications, such as actuator position feedback from servo valves to automotive and aviation testing environments.

  • Differential pressure transducer
  • Pressure ranges available from ±500 PSID up to ±5000 PSID
  • Compensated temperature −23°C to +121°C
  • Small, lightweight manifold style mounting for easy installation
  • Accuracy of P1=2mV/V ±10% and P2=P1 ±2% of P1
  • Output of mV/V
  • Operating media of any compatible with 300 series CRES, Buna-N-Rubber, 2024-T351 AL and PH CRES
  • Very low thermal sensitivity shift of ±0.01% of F.S. per °C
  • Temperature compensated design provides highly accurate pressure measurements
  • Shock and vibration resistant design offers highly accurate and reliable pressure monitoring in many operating conditions
  • Durable solution withstands harsh environments for long-lasting performance
  • Custom electrical connection and pressure port adapters are available on request

Potential applications for the Paine™ 210-60-090 series include:

  • Test stands and measurements
  • Robotic hydraulic controls
  • Industrial process systems
  • Positioning systems
  • Valve pressure control

Please see below the pressure table for the Paine™ 210-60-090 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine 210-60-090 Specifications

£0.00 Ex Tax: £0.00

Emerson Paine™ 210-65-010 Series

The Paine™ 210-60-090 differential pressure transducer series from Emerson offers measuring pressure ranges from ±500 PSID up to ±5000 PSID. This transducer comes with two separate sensing elements to measure differential pressure at the input ports. This device is shock and vibration resistant, produces highly accurate measurements in harsh and demanding conditions. The 210-65-010 differential pressure transducer from Emerson is engineered to provide differential measurements in fire-resistant Skydrol® aviation hydraulic fluid applications.

  • Differential pressure transducer
  • Pressure ranges available from ±500 PSID up to ±5000 PSID
  • Compensated temperature −23°C to +121°C
  • Accuracy of P1 = 2.0mV/V (±10%) and P2 = P1 (±2% of P1)
  • Output of mV/V
  • Small, lightweight manifold style mounting for easy installation
  • Skydrol® aviation hydraulic fluid compatible
  • Very low Thermal sensitivity shift of ±0.01% of F.S. per °C
  • Shock and vibration resistant design offers highly accurate and reliable pressure monitoring in many operating conditions
  • Compact design for an easy-to-use differential measurement solution
  • Durable solution withstands harsh environments for long-lasting performance
  • Custom electrical connection and pressure port adapters are available on request

Potential applications for the Paine™ 210-60-090 series include:

  • Aviation and automotive test stands
  • Aerospace and aviation transportation motion simulators
  • Transportation steering control systems
  • Military weapon positioning systems
  • Actuators
  • Positioning systems

Please see below the pressure table for the Paine™ 210-65-010 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine 210-65-010 Specifications

£0.00 Ex Tax: £0.00