+44 (0)1342 330 470

0603

SRT CRB 0603

Non-Magnetic Trimmable Thick Film Chip Resistors

Trimmable non-magnetic, thick film chip resistor
Resistance range from 1Ω to 10MΩ
Tolerances from ±5% to ±30%
TCR from ±50 ppm/°C to ±250 ppm/°C
Power rating of 0.1W (at +70°C)
Temperature range from -55°C up to +155°C

Resi PTFR Series

High-Stability Precision Thin Film Chip Resistor

Precision thin film chip resistor with 10Ω to 5.1MΩ range, tolerance down to ±0.01% and TCR as low as ±5ppm/℃ for high-stability SMD circuits.

SRT CHR 0603

Non-Magnetic Thick Film Chip Resistors

Non-magnetic thick film chip resistor
Resistance range from 1Ω to 10MΩ
Tolerances from ±1% to ±20%
TCR from ±50 ppm/°C to ±250 ppm/°C
Power rating of 0.1W (at +70°C)
Temperature range from -55°C up to +155°C

Susumu RFD Series

Surface-mount high frequency chip resistor

Surface-mount high frequency chip resistor
Temperature range of −40°C to +125°C
Rated power of 50mW
Operating frequency of DC to 67 GHz
Resistance of 50Ω, 75Ω, and 100Ω

Susumu RGV Series

Metal thin-film high voltage chip resistor

Metal thin-film chip resistor (high voltage)
High voltage operation: RGV3225 1000V
Long term stability with inorganic passivation.
Resistance tolerance : ±0.1%
TCR : ±25 ppm/℃
Thin film structure enabling low noise and anti-sulphur

SRT Microcéramique Chip Capacitors with Negative TC

SRT Microcéramique Chip Capacitors with Negative TC

NP0 (C0G) Chip ceramic capacitor with negative TC
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kH (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Frequency Capacitor Series

SRT Microcéramique High Frequency Capacitor

MLCC Capacitor for RF and Microwave communication
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Temperature NP0 Capacitor Series

SRT Microcéramique High Temperature NP0 Capacitor

High Temperature, ultra stable MLCC Capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Temperature X7R Capacitor Series

SRT Microcéramique High Temperature X7R Capacitor

High Temperature MLCC Capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage NP0 Capacitor Series (200V-1kV)

SRT Microcéramique High Voltage NP0 Capacitor (200V-1kV)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage X7R Capacitor Series (200V-1kV)

SRT Microcéramique High Voltage X7R Capacitor (200V-1kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Low Voltage NP0 Capacitor Series (16-100V)

SRT Microcéramique Low Voltage NP0 Capacitor (16-100V)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Low Voltage X7R Capacitor Series (16-100V)

SRT Microcéramique Low Voltage X7R Capacitor (16-100V)

Stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Non Magnetic NP0 Capacitor Series

SRT Microcéramique Non Magnetic NP0 Capacitor

Non magnetic NP0 (Type 1) MLCC Capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Non Magnetic X7R Capacitor Series

SRT Microcéramique Non Magnetic X7R Capacitor

Non magnetic X7R (Type 2) MLCC Capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor maximum of 2.5% at 1V_rms and 1kHz for Un between 16V and 25V and maximum 1% at 1V_rms and 1kHz for Un between 25V and 50V
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique NP0 Capacitor Series for Medical Applications

SRT Microcéramique NP0 Capacitor for Medical Applications

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical medical applications
Dissipation factor maximum of 0.1% at 1V_rms and 1kHz (values under 1nF measured at 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric withstanding voltage of 250% of rated voltage for 5s + 1s, 50mA maximum

Custom Component Solutions

Working alongside your design team from the earliest stage, we help you select the right part for the application and, where a standard part will not do, develop customised components with our manufacturing partners such as lead length, termination and package size.

Related Components

Manufacturers

Looking for 0603?

The below manufacturers are all of our authorised partners that produce 0603 or related products.

SRT Microcéramique

SRT Resistor Technology

0603