+44 (0) 1342 330 470

Sensors

NVE AHT925-01

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 1.5mT

NVE AHT925-14E

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 1.5mT

NVE AKL001-12E

GMR analog gear tooth sensor
Digital output duty cycle of 50%
Large analog peak to peak output
Gear pitch of between 2.5mm and 6mm
TDFN8 package

NVE AKL002-12E

GMR analog gear tooth sensor
Digital output duty cycle of 50%
Large analog peak to peak output
Gear pitch of between 1.5mm and 2.5mm
TDFN8 package

NVE AKL003-12E

GMR analog gear tooth sensor
Digital output duty cycle of 50%
Large analog peak to peak output
Gear pitch of between 0.6mm and 1.5mm
TDFN8 package

NVE ALT025-10E

Analog TMR bridge sensor
Revolutionary bipolar differential output
Large signals, typically 20 mV/V/mT
Linear range of ±10 mT (±100 Oe)
Ultra-low temperature coefficient of output (±0.1 %/°C)

NVE ASR002-10E

Smart TMR non-contact angle sensor
Rotational speed measurement of up to 375000rpm
0.1° resolution
±0.2° repeatability
Sample rate of 12.5kSps
Low typical supply current at 4mA

NVE BD020-14E

GMR nanopower medical magnetic sensor
Typical power consumption of 72nW at 2.4V
Excellent sensitivity to applied magnetic fields
Solid state reliability
Precise detection of low magnetic fields
Inspected and qualified for implantable medical devices
Ultraminiature ULLGA Package

NVE BD027-14E

GMR nanopower medical magnetic sensor
Typical power consumption of 45nW at 0.9V
Excellent sensitivity to applied magnetic fields
Solid state reliability
Precise detection of low magnetic fields
Inspected and qualified for implantable medical devices
Ultraminiature ULLGA Package

NVE BD927-14E

Low voltage digital switch for medical devices
Typical power consumption 13.5μW at 0.9V
Excellent sensitivity to applied magnetic fields
Solid-state reliability
Precise detection of low magnetic fields
Inspected and qualified for implantable medical devices
Ultraminiature ULLGA Package

NVE SM124-10E

Smart GMR Magnetometer
Detecting magnets over 50mm away with superior in-plane sensitivity
8 bit / 1% output resolution
Sample rate of 10kSps
Internal temperature compensating
Range of programmable features
Slick, single-byte communication interface

NVE SM225-10E

Smart TMR Magnetometer
Detecting magnets over 50mm away with superior in-plane sensitivity
10 bit output resolution
Sample rate of 15kSps
Wide 0 to 15 mT/0 to 150 Oe linear range
Analog field measurement plus on/off digital output

NVE SM324-10E

World’s first Smart TMR Magnetometer
Detecting magnets over 50mm away with superior in-plane sensitivity
24 bit output resolution
Sample rate of 300 samples per second
Internal temperature compensating
Range of programmable features
Robust EDS protection, suitable for harsh environments

RdF 20100 Series

Butt bonded foil thermocouple
Micro-foil® thickness of 0.0128mm (0.0005″)
Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
2 wire configuration
Removable Kapton® frame for bare foil applications
Standard lead length of 6″, additional lengths available on request

RdF 20101 Series

Butt bonded foil thermocouple
Micro-foil® thickness of 0.0128mm (0.0005″)
Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
2 wire configuration
Removable Kapton® frame for bare foil applications
Standard lead length of 6″, additional lengths available on request

RdF 20102 Series

Butt bonded foil thermocouple
Micro-foil® thickness of 0.0128mm (0.0005″)
Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
2 wire configuration
Removable Kapton® frame for bare foil applications
Standard lead length of 6″, additional lengths available on request

NVE AHT925-01

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 1.5mT

NVE AHT925-14E

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 1.5mT

NVE AKL001-12E

GMR analog gear tooth sensor
Digital output duty cycle of 50%
Large analog peak to peak output
Gear pitch of between 2.5mm and 6mm
TDFN8 package

NVE AKL002-12E

GMR analog gear tooth sensor
Digital output duty cycle of 50%
Large analog peak to peak output
Gear pitch of between 1.5mm and 2.5mm
TDFN8 package

NVE AKL003-12E

GMR analog gear tooth sensor
Digital output duty cycle of 50%
Large analog peak to peak output
Gear pitch of between 0.6mm and 1.5mm
TDFN8 package

NVE ALT025-10E

Analog TMR bridge sensor
Revolutionary bipolar differential output
Large signals, typically 20 mV/V/mT
Linear range of ±10 mT (±100 Oe)
Ultra-low temperature coefficient of output (±0.1 %/°C)

NVE ASR002-10E

Smart TMR non-contact angle sensor
Rotational speed measurement of up to 375000rpm
0.1° resolution
±0.2° repeatability
Sample rate of 12.5kSps
Low typical supply current at 4mA

NVE BD020-14E

GMR nanopower medical magnetic sensor
Typical power consumption of 72nW at 2.4V
Excellent sensitivity to applied magnetic fields
Solid state reliability
Precise detection of low magnetic fields
Inspected and qualified for implantable medical devices
Ultraminiature ULLGA Package

NVE BD027-14E

GMR nanopower medical magnetic sensor
Typical power consumption of 45nW at 0.9V
Excellent sensitivity to applied magnetic fields
Solid state reliability
Precise detection of low magnetic fields
Inspected and qualified for implantable medical devices
Ultraminiature ULLGA Package

NVE BD927-14E

Low voltage digital switch for medical devices
Typical power consumption 13.5μW at 0.9V
Excellent sensitivity to applied magnetic fields
Solid-state reliability
Precise detection of low magnetic fields
Inspected and qualified for implantable medical devices
Ultraminiature ULLGA Package

NVE SM124-10E

Smart GMR Magnetometer
Detecting magnets over 50mm away with superior in-plane sensitivity
8 bit / 1% output resolution
Sample rate of 10kSps
Internal temperature compensating
Range of programmable features
Slick, single-byte communication interface

NVE SM225-10E

Smart TMR Magnetometer
Detecting magnets over 50mm away with superior in-plane sensitivity
10 bit output resolution
Sample rate of 15kSps
Wide 0 to 15 mT/0 to 150 Oe linear range
Analog field measurement plus on/off digital output

NVE SM324-10E

World’s first Smart TMR Magnetometer
Detecting magnets over 50mm away with superior in-plane sensitivity
24 bit output resolution
Sample rate of 300 samples per second
Internal temperature compensating
Range of programmable features
Robust EDS protection, suitable for harsh environments

RdF 20100 Series

Butt bonded foil thermocouple
Micro-foil® thickness of 0.0128mm (0.0005″)
Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
2 wire configuration
Removable Kapton® frame for bare foil applications
Standard lead length of 6″, additional lengths available on request

RdF 20101 Series

Butt bonded foil thermocouple
Micro-foil® thickness of 0.0128mm (0.0005″)
Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
2 wire configuration
Removable Kapton® frame for bare foil applications
Standard lead length of 6″, additional lengths available on request

RdF 20102 Series

Butt bonded foil thermocouple
Micro-foil® thickness of 0.0128mm (0.0005″)
Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
2 wire configuration
Removable Kapton® frame for bare foil applications
Standard lead length of 6″, additional lengths available on request

Featured products

Coto RR133-1E83-511 Series

TMR ultra-low power digital magnetic sensor
Omnipolar magnetic field response
Operate sensitivity of 14 G (typical)
Supply voltage range of 2.4V to 5.5V
Operating frequency of 1 kHz
Operating temperature range from -40°C to +125°C.

Merit Sensor RSH Series

Uncompensated pressure sensor with MEMS-die-on-pressure-port design.
Compatible with wet and harsh media.
Suitable for broad temperature and pressure ranges.
Pressure range 0 to 500 psi (absolute or gauge).
Operating temperature range -40°C to 150°C

Merit Sensors MSS100 Pressure Transducer

Merit Sensor MSS100 Series

Fully compensated pressure transducer.
Compact and lightweight design.
Easy electrical connection via Molex connector.
Designed for medical, pharmaceutical, and bio-processing applications.
Pressure range 5 to 100 psi (compound, vacuum, absolute, or gauge).
Operating temperature 10°C to 50°C.

Merit Sensors TRVF series pressure sensor

Merit Sensor TRVF Series

Fully compensated pressure sensor.
Wetted materials including silicon, glass, and ceramic enhances compatibility with harsh media.
Compact and lightweight, weighing approximately 1.35 grams.
Designed to measure pressure in air, gases, and liquids.
Pressure Range available from 1 to 300 psi (absolute or gauge).
Operating temperature range between -40°C to 150°C.

Manufacturers

Looking for Sensors?

The below manufacturers are all of our authorised partners that produce Sensors or related products.

Coto Technology

Metis Engineering Ltd

Newtek Sensor Solutions

Stellar Technology

Sensors

We offer a broad selection of sensors from a number of different industry leading manufacturers. Many of our sensors are designed for use in a variety of industries including Automotive, Medical, Aerospace, Oil & Gas and other harsh environment applications. Our range of sensors available include:

Temperature Sensors
Pressure Sensors
Magnetic Sensors
Load Cells
Float & Flow Switches

From standard off-the-shelf products to customised sensors, we can work with you and our authorised partners to offer the right solution suited to your requirements.

Looking for that extended pressure range, greater temperature rating or a different connector fitting? Need something a little different from the standard products below? Contact us now with your requirement.