Susumu

Susumu

Ultra-High Precision, Thin Film Resistors and Resistor Networks

  • NEW higher temperature resistors (RGA series) and resistor networks (RMA series), up to 230°C available
  • Specialist in thin film and metal foil SMD resistors covering a wide range of resistance values and applications
  • Low ohmic, current sensing resistors and long sided variants available for higher power applications
  • Automotive approved, high frequency RF components and sample kits also available

For their official website, please click here

Show:
Sort By:

Susumu ATS2012 Series

The ATS2012 series of thin film high frequency chip attenuators from Susumu offer designers a high frequency operation up to 30GHz in a miniature surface-mount 0805 chip size. These attenuators are available with various circuit and pin arrangements as well as offering an internal circuit which is specially designed for 0-10dB attenuation.

  • Surface-mount high frequency chip attenuator
  • Attenuation of 0dB to 10dB
  • Choice of circuit type of thru, tee, pi or dual pi
  • Attenuation tolerance of ±0.25dB, ±0.5dB or ±0.75dB
  • Impedance of 50Ω
  • Operating frequency of DC - 30GHz
  • Rated power of 0.1W
  • Chip size 0805
  • Operating temperature range is −55°C to +125°C

The Susumu ATS2012 series of thin film high frequency chip attenuators are ideal for the following applications:

  • Wireless communication devices
  • Base stations
  • Wireless communication modules

The below table gives the full specifications of the Susumu ATS2012 attenuator series:

Susumu ATS2012 Specifications

* Some specifications may be updated because this product is still under development. Please contact us for further details

£0.00 Ex Tax: £0.00

Susumu HRG3216 Series

The HRG series of high power thin film chip resistors from Susumu expand on the original RG series by offering a greater power handling capability. Parts are available in a 1206 chip size, with resistance values ranging from 10Ω up to 100kΩ and with a power rating of 1W which is significantly larger than the existing same size resistor offerings. The resistors have short sided terminals but with wider bottom contacts to enable the higher power handling capabilities. The HRG series are AEC-Q200 compliant and have an operating temperature of between −55°C to +155°C which makes this range suitable for automotive applications.

  • Surface-mount high power thin film chip resistor
  • Resistance range of between 10Ω to 100kΩ
  • Power rating 1W
  • Tolerance values available ±0.1% (B) and ±0.5% (D)
  • TCR values available of ±25 ppm/°C (P) and ±50 ppm°C (Q)
  • Resistance value series E-24 and E-96
  • Maximum voltage of 200V
  • Operating temperature range of −55°C to +155°C
  • Thin film structure enabling low noise and anti-sulfur
  • Chip size of 1206 with wider bottom terminal enabling higher power capability (short side terminal)
  • Significantly larger power handling capability than existing same size resistors

The Susumu HRG series of high power thin film chip resistors are ideal for the following applications:

  • Power source related devises
  • DC motors
  • Inverters
  • Robotics
  • Industrial control system

The below table gives the full specifications of the Susumu HRG3216 resistor series:

Susumu HRG3216 Specifications

Please see the Susumu selection guide under the Technical Library tab for the E-24 and E-96 values

£0.00 Ex Tax: £0.00

Susumu KRL0510 Series

The KRL0510 series of short sided terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, where as the M type utilises low EMF materials that are stable up to +155°C. Susumu's metal foil technology enables a very stable TCR at a low resistance, and the face down mounting allows for accurate high current measurement.

  • Surface-mount short sided terminal metal foil low resistance chip resistor
  • Resistance values range from 0.05Ω to 0.5Ω
  • Resistance value series E-6 and E-12
  • Power rating of 0.2W
  • Tolerance values available are ±1% (F) and ±2% (G)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R)
  • Chip size 0402
  • Choices of operating temperature range are −55°C to +175°C (C) or −55°C to +155°C (M) for the low EMF version
  • Choices of electrode type are bottom electrode (B) or U-shaped electrode (E)
  • Certified AEC-Q200 compliant

The Susumu KRL0510 series of  short sided terminal metal foil low resistance chip resistors are ideal for the following applications:

  • Automotive electronics
  • Power source devices
  • ACDC converters
  • DCDC converters
  • Motors
  • Inverters
  • Office automation equipment

The below table gives the full specifications of the Susumu KRL series including the KRL0510:

Susumu KRL0510 Specifications

*1 We can meet your requirement for resistance values not specified in the above table, please contact us for further details
*2 We can meet your requirement outside of E-6/E-12 series resistance, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL0816 Series

The KRL0816 series of short sided terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, where as the M type utilises low EMF materials that are stable up to +155°C. Susumu's metal foil technology enables a very stable TCR at a low resistance and the face down mounting allows for accurate high current measurement.

  • Surface-mount short sided terminal metal foil low resistance chip resistor
  • Resistance values range from 0.005Ω to 0.5Ω
  • Resistance value series E-6 and E-12
  • Power rating of 0.3W
  • Tolerance values available are ±1% (F) and ±2% (G) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 0603
  • Choices of operating temperature range are −55°C to +175°C (C) or −55°C to +155°C (M) for the low EMF version
  • Choices of electrode type are bottom electrode (B) or U-shaped electrode (E)
  • Certified AEC-Q200 compliant

The Susumu KRL0816 series of short sided terminal metal foil low resistance chip resistors are ideal for the following applications:

  • Automotive electronics
  • Power source devices
  • ACDC converters
  • DCDC converters
  • Motors
  • Inverters
  • Office automation equipment

The below table gives the full specifications of the Susumu KRL series including the KRL0816:

Susumu KRL0816 Specifications

*1 We can meet your requirement for resistance values not specified in the above table, please contact us for further details
*2 We can meet your requirement outside of E-6/E-12 series resistance, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL11050 Series

The KRL11050 series of long sided terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, where as the M type utilises low EMF materials that are stable up to +155°C. Susumu's metal foil technology enables a very stable TCR at a low resistance and the face down mounting allows for accurate high current measurement.

  • Surface-mount long sided terminal metal foil low resistance chip resistor
  • Resistance values range from 0.001Ω to 0.5Ω
  • Resistance value series E-6
  • Power rating of 6W
  • Tolerance values available are ±1% (F), ±2% (G) and ±5% (J) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q), ±100 ppm/°C (R) and ±150 ppm°C (depending on the resistance value required)
  • Chip size 4320
  • Choices of operating temperature range are −55°C to +175°C (C) or −55°C to +155°C (M) for the low EMF version
  • Choices of electrode type are bottom electrode (B) or U-shaped electrode (E)
  • Certified AEC-Q200 compliant

The Susumu KRL11050 series of long sided terminal metal foil low resistance chip resistors are ideal for the following applications:

  • Automotive electronics
  • Power source devices
  • ACDC converters
  • DCDC converters
  • Motors
  • Inverters
  • Office automation equipment

The below table gives the full specifications of the Susumu KRL series including the KRL11050:

Susumu KRL11050 Specifications

*1 We can meet your requirement of less than 0.0001Ω, please contact us for further details
*2 We can meet your requirement of resistance value outside of E-6 series, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL11050T4 Series

The KRL11050T4 series of 4-terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures up to +155°C and are ideal for use in applications that require the use of low EMF components. The KRL11050T4 series uses metal foil technology which enables a very stable TCR at a low resistance value ranging from 0.001Ω up to 0.5Ω and the face down mounting allows for accurate high current measurement.

  • Surface-mount 4-terminal metal foil low resistance chip resistor
  • 4-terminal pad pattern for current sensing applications
  • Separated voltage terminal for precise measurement of voltage
  • Resistance values range from 0.001Ω to 0.5Ω
  • Resistance value series E-6
  • Power rating of 5W
  • Tolerance values available are ±1% (F), ±2% (G) and ±5% (J) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 4320
  • Operating temperature range are −55°C to +155°C low EMF
  • Certified AEC-Q200 compliant

The Susumu KRL11050T4 series of 4-terminal metal foil low resistance chip resistor series are ideal for high power and high volume applications such as the following:

  • Automotive electronics
  • Industrial measurement instrumentation/equipment
  • Smartphones, mobile phones
  • PCs, HDD
  • Power devices
  • Inverters
  • Audio visual equipment

The below table gives the full specifications of the Susumu KRL series including the KRL11050T4:

Susumu KRL11050T4 Specifications

*1 We can meet your requirement of less than 0.0001Ω, please contact us for further details
*2 We can meet your requirement of resistance value outside of E-6 series, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL1220 Series

The KRL1220 series of short sided terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, where as the M type utilises low EMF materials that are stable up to +155°C. Susumu's metal foil technology enables a very stable TCR at a low resistance and the face down mounting allows for accurate high current measurement.

  • Surface-mount short sided terminal metal foil low resistance chip resistor
  • Resistance values range from 0.005Ω to 0.5Ω
  • Resistance value series E-6 and E-12
  • Power rating of 0.5W
  • Tolerance values available are ±1% (F) and ±2% (G) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 0805
  • Choices of operating temperature range are −55°C to +175°C (C) or −55°C to +155°C (M) for the low EMF version
  • Option of electrode type are bottom electrode (B) or U-shaped electrode (E)
  • Certified AEC-Q200 compliant

The Susumu KRL1220 series of short sided terminal metal foil low resistance chip resistors are ideal for the following applications:

  • Automotive electronics
  • Power source devices
  • ACDC converters
  • DCDC converters
  • Motors
  • Inverters
  • Office automation equipment

The below table gives the full specifications of the Susumu KRL series including the KRL1220:

Susumu KRL1220 Specifications

*1 We can meet your requirement for resistance values not specified in the above table, please contact us for further details
*2 We can meet your requirement outside of E-6/E-12 series resistance, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL15075 Series

The KRL15075 series of long sided terminal metal foil low resistance chip resistors from Susumu, have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, where as the M type utilises low EMF materials that are stable up to +155°C. Susumu's metal foil technology enables a very stable TCR at a low resistance and the face down mounting allows for accurate high current measurement.

  • Surface-mount long sided terminal metal foil low resistance chip resistor
  • Resistance values range from 0.001Ω to 0.5Ω
  • Resistance value series E-6
  • Power rating of 10W
  • Tolerance values available are ±1% (F), ±2% (G) and ±5% (J) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 5930
  • Choices of operating temperature range are −55°C to +175°C (C) or −55°C to +155°C (M) for the low EMF version
  • Choices of electrode type are bottom electrode (B) or U-shaped electrode (E)
  • Certified AEC-Q200 compliant

The Susumu KRL15075 series of long sided terminal metal foil low resistance chip resistors are ideal for the following applications:

  • Automotive electronics
  • Power source devices
  • ACDC converters
  • DCDC converters
  • Motors
  • Inverters
  • Office automation equipment

The below table gives the full specifications of the Susumu KRL series including the KRL15075:

Susumu KRL15075 Specifications

*1 We can meet your requirement of less than 0.0001Ω, please contact us for further details
*2 We can meet your requirement of resistance value outside of E-6 series, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL1608 Series

The KRL1608 series of long sided terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, where as the M type utilises low EMF materials that are stable up to +155°C. Susumu's metal foil technology enables a very stable TCR at a low resistance and the face down mounting allows for accurate high current measurement.

  • Surface-mount long sided terminal metal foil low resistance chip resistor
  • Resistance values range from 0.005Ω to 0.1Ω
  • Resistance value series E-6
  • Power rating of 0.5W
  • Tolerance values available are ±1% (F) and ±2% (G) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 0603
  • Choices of operating temperature range are −55°C to +175°C (C) or −55°C to +155°C (M) for the low EMF version
  • Choices of electrode type are bottom electrode (B) or U-shaped electrode (E)
  • Certified AEC-Q200 compliant

The Susumu KRL1608 series of long sided terminal metal foil low resistance chip resistors are ideal for the following applications:

  • Automotive electronics
  • Power source devices
  • ACDC converters
  • DCDC converters
  • Motors
  • Inverters
  • Office automation equipment

The below table gives the full specifications of the Susumu KRL series including the KRL1608:

Susumu KRL1608 Specifications

*1 We can meet your requirement of less than 0.0001Ω, please contact us for further details
*2 We can meet your requirement of resistance value outside of E-6 series, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL1632 Series

The KRL1632 series of short sided terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, where as the M type utilises low EMF materials that are stable up to +155°C. Susumu's metal foil technology enables a very stable TCR at a low resistance and the face down mounting allows for accurate high current measurement.

  • Surface-mount short sided terminal metal foil low resistance chip resistor
  • Resistance values range from 0.005Ω to 0.5Ω
  • Resistance value series E-6 and E-12
  • Power rating of 0.75W
  • Tolerance values available are ±1% (F) and ±2% (G) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 1206
  • Choices of operating temperature range are −55°C to +175°C (C) or −55°C to +155°C (M) for the low EMF version
  • Choices of electrode type are bottom electrode (B) or U-shaped electrode (E)
  • Certified AEC-Q200 compliant

The Susumu KRL1632 series of short sided terminal metal foil low resistance chip resistors are ideal for the following applications:

  • Automotive electronics
  • Power source devices
  • ACDC converters
  • DCDC converters
  • Motors
  • Inverters
  • Office automation equipment

The below table gives the full specifications of the Susumu KRL series including the KRL1632:

Susumu KRL1632 Specifications

*1 We can meet your requirement for resistance values not specified in the above table, please contact us for further details
*2 We can meet your requirement outside of E-6/E-12 series resistance, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL2012 Series

The KRL2012 series of long sided terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, where as the M type utilises low EMF materials that are stable up to +155°C. Susumu's metal foil technology enables a very stable TCR at a low resistance and the face down mounting allows for accurate high current measurement.

  • Surface-mount long sided terminal metal foil low resistance chip resistor
  • Resistance values range from 0.001Ω to 0.5Ω
  • Resistance value series E-6
  • Power rating of 1W
  • Tolerance values available are ±1% (F), ±2% (G) and ±5% (J) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q), ±100 ppm/°C (R) and ±150 ppm°C (depending on the resistance value required)
  • Chip size 0805
  • Choices of operating temperature range are −55°C to +175°C (C) or −55°C to +155°C (M) for the low EMF version
  • Choices of electrode type are bottom electrode (B) or U-shaped electrode (E)
  • Certified AEC-Q200 compliant

The Susumu KRL2012 series of long sided terminal metal foil low resistance chip resistors are ideal for the following applications:

  • Automotive electronics
  • Power source devices
  • ACDC converters
  • DCDC converters
  • Motors
  • Inverters
  • Office automation equipment

The below table gives the full specifications of the Susumu KRL series including the KRL2012:

Susumu KRL2012 Specifications

*1 We can meet your requirement of less than 0.0001Ω, please contact us for further details
*2 We can meet your requirement of resistance value outside of E-6 series, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL2550 Series

The KRL2550 series of short sided terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, where as the M type utilises low EMF materials that are stable up to +155°C. Susumu's metal foil technology enables a very stable TCR at a low resistance and the face down mounting allows for accurate high current measurement.

  • Surface-mount short sided terminal metal foil low resistance chip resistor
  • Resistance values range from 0.005Ω to 0.5Ω
  • Resistance value series E-6 and E-12
  • Power rating of 1.5W
  • Tolerance values available are ±1% (F) and ±2% (G) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 1206
  • Choices of operating temperature range are −55°C to +175°C (C) or −55°C to +155°C (M) for the low EMF version
  • Choices of electrode type are bottom electrode (B) or U-shaped electrode (E)
  • Certified AEC-Q200 compliant

The Susumu KRL2550 series of short sided terminal metal foil low resistance chip resistors are ideal for the following applications:

  • Automotive electronics
  • Power source devices
  • ACDC converters
  • DCDC converters
  • Motors
  • Inverters
  • Office automation equipment

The below table gives the full specifications of the Susumu KRL series including the KRL2550:

Susumu KRL2550 Specifications

*1 We can meet your requirement for resistance values not specified in the above table, please contact us for further details
*2 We can meet your requirement outside of E-6/E-12 series resistance, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL3216 Series

The KRL3216 series of long sided terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, where as the M type utilises low EMF materials that are stable up to +155°C. Susumu's metal foil technology enables a very stable TCR at a low resistance and the face down mounting allows for accurate high current measurement.

  • Surface-mount long sided terminal metal foil low resistance chip resistor
  • Resistance values range from 0.001Ω to 0.5Ω
  • Resistance value series E-6
  • Power rating of 1.5W
  • Tolerance values available are ±1% (F), ±2% (G) and ±5% (J) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q), ±100 ppm/°C (R) and ±150 ppm°C (depending on the resistance value required)
  • Chip size 1206
  • Choices of operating temperature range are −55°C to +175°C (C) or −55°C to +155°C (M) for the low EMF version
  • Choices of electrode type are bottom electrode (B) or U-shaped electrode (E)
  • Certified AEC-Q200 compliant

The Susumu KRL3216 series of long sided terminal metal foil low resistance chip resistors are ideal for the following applications:

  • Automotive electronics
  • Power source devices
  • ACDC converters
  • DCDC converters
  • Motors
  • Inverters
  • Office automation equipment

The below table gives the full specifications of the Susumu KRL series including the KRL3216:

Susumu KRL3216 Specifications

*1 We can meet your requirement of less than 0.0001Ω, please contact us for further details
*2 We can meet your requirement of resistance value outside of E-6 series, please contact us for further details /p>

£0.00 Ex Tax: £0.00

Susumu KRL3216T4 Series

The KRL3216T4 series of 4-terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures up to +155°C and are ideal for use in applications that require the use of low EMF components. The KRL3216T4 series uses metal foil technology which enables a very stable TCR at a low resistance value ranging from 0.001Ω up to 0.5Ω and the face down mounting allows for accurate high current measurement.

  • Surface-mount 4-terminal metal foil low resistance chip resistor
  • 4-terminal pad pattern for current sensing applications
  • Separated voltage terminal for precise measurement of voltage
  • Resistance values range from 0.001Ω up to 0.5Ω
  • Resistance value series E-6
  • Power rating of 1W
  • Tolerance values available are ±1% (F), ±2% (G) and ±5% (J) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 1206
  • Operating temperature range is −55°C to +155°C
  • Certified AEC-Q200 compliant

The Susumu KRL3216T4 series of 4-terminal metal foil low resistance chip resistor are ideal for high power and high volume applications such as the following:

  • Automotive electronics
  • Industrial measurement instrumentation/equipment
  • Smartphones, mobile phones
  • PCs, HDD
  • Power devices
  • Inverters
  • Audio visual equipment

The below table gives the full specifications of the Susumu KRL Series including the KRL3216T4:

Susumu KRL3216T4 Specifications

*1 We can meet your requirement of less than 0.0001Ω, please contact us for further details
*2 We can meet your requirement of resistance value outside of E-6 series, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL3264 Series

The KRL3264 series of short sided terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, where as the M type utilises low EMF materials that are stable up to +155°C. Susumu's metal foil technology enables a very stable TCR at a low resistance and the face down mounting allows for accurate high current measurement.

  • Surface-mount short sided terminal metal foil low resistance chip resistor
  • Resistance values range from 0.005Ω to 1Ω
  • Resistance value series E-6 and E-12
  • Power rating of 2W
  • Tolerance values available are ±1% (F) and ±2% (G) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 2512
  • Choices of operating temperature range are −55°C to +175°C (C) or −55°C to +155°C (M) for the low EMF version
  • Choices of electrode type are bottom electrode (B) or U-shaped electrode (E)
  • Certified AEC-Q200 compliant

The Susumu KRL3264 series of short sided terminal metal foil low resistance chip resistors are ideal for the following applications:

  • Automotive electronics
  • Power source devices
  • ACDC converters
  • DCDC converters
  • Motors
  • Inverters
  • Office automation equipment

The below table gives the full specifications of the Susumu KRL series including the KRL3264:

Susumu KRL3264 Specifications

*1 We can meet your requirement for resistance values not specified in the above table, please contact us for further details
*2 We can meet your requirement outside of E-6/E-12 series resistance, please contact us for further details

£0.00 Ex Tax: £0.00