4kV series
- Cylindrical high voltage axial leaded resistor
- Maximum operating voltage from 600V up to 30kV *
- Resistance values from 200Ω up to 2GΩ *
- Tolerances of ±0.1%, ±0.25%, ±0.5% and ±1%
- TCR as tight as ±80 ppm/°C from -15°C to +105°C
- Maximum power rating from 0.5W up to 15W *
- Operating Temperature Range of -55°C to +225°C
- Cylindrical high voltage axial leaded resistor
- Maximum operating voltage from 2kV up to 30kV *
- Resistance values from 600Ω up to 10GΩ *
- Tolerances of ±1% and ±5%
- TCR as tight as ±80 ppm/°C from +25°C to +105°C
- Operating Temperature Range of -55°C to +225°C
- Maximum power rating from 1.5W up to 15W *
- High Voltage SMD Resistors
- Resistance range from 10kΩ to 50GΩ
- Tolerances from ±0.1% to ±20%
- TCR from ±25 ppm/°C to ±200 ppm/°C
- Power rating of 2W
- Voltage rating of 4kV
- Temperature range from -55°C to +150°C
- High Voltage Divider
- Resistance range from 100kΩ to 1TΩ
- Ratio tolerances from ±0.1% to ±20%
- TCR from ±25 ppm/°C to ±>200 ppm/°C
- Power rating of 0.5W
- Voltage rating of 4kV
- Temperature range from -55°C to +150°C
- High Voltage Resistors
- Resistance range from 100kΩ to 1TΩ
- Tolerances from ±0.1% to ±20%
- TCR from ±25 ppm/°C to >±200 ppm/°C
- Power rating of 0.5W
- Voltage rating of 4kV
- Temperature range from -55°C to +150°C
- Military Grade High Voltage SMD Resistors
- Resistance range from 10kΩ to 50GΩ
- Tolerances from ±0.1% to ±20%
- TCR from ±25 ppm/°C to ±200 ppm/°C
- Power rating of 2W
- Voltage rating of 4kV
- Temperature range from -55°C to +150°C
- Ultra High Voltage SMD Resistors
- Resistance range from 90MΩ to 50GΩ
- Tolerances from ±1% to ±20%
- TCR of ±100 ppm/°C or ±200 ppm/°C
- Voltage rating from 3kV to 6kV
- Temperature range from -55°C to +150°C
- Ultra High Voltage SMD Resistors
- Resistance range from 120MΩ to 50GΩ
- Tolerances from ±1% to ±20%
- TCR of ±100 ppm/°C or ±200 ppm/°C
- Voltage rating from 4kV to 10kV
- Temperature range from -55°C to +150°C
- Ultra High Voltage SMD Resistors
- Resistance range from 85MΩ to 50GΩ
- Tolerances from ±1% to ±20%
- TCR of ±100 ppm/°C or ±200 ppm/°C
- Voltage rating from 4kV to 14kV
- Temperature range from -55°C to +150°C
- MLCC high power, low capacitance variation with voltage capacitors
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Ultra stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Stable ceramic capacitor
- High quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Radial dipped X7R capacitor series
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 5.10-4 at 1Vrms and 1MHz for values ≤ 1000pF and under 5.10-4 at 1Vrms and 1KHz for values > 1000pF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E