- High temperature logic gates
- Exceeds AEC-Q100 Grade 0 requirements (qualification pending)
- 16mA output drive current
- EDS: 2000V HBM or 200V MM
- CMOS Low power consumption
Menu
Automotive approval
We offer a range of products that have been certified or approved for use within the Automotive industry. These parts are either:
- AEC-Q100 “Failure Mechanism Based Stress Test Qualification For Integrated Circuits”
- AEC-Q101 “Failure Mechanism Based Stress Test Qualification For Discrete Semiconductors”
- AEC-Q200 “Stress Test Qualification For Passive Components”
Some manufacturers also offer approval by separate sources on an individual basis.
- High temperature adjustable linear voltage regulator
- Exceeds AEC-Q100 Grade 0 requirements (qualification pending)
- Quiescent current of 1.1mA
- Chip-enable input signal allowing to place the circuit in low power, disable mode
- Shunt resistor
- Resistance range from 35µΩ to 500µΩ
- Tolerance of ±5.0%
- TCR of <50 ppm/K
- Power rating of 30W
- Temperature range from -40°C to +170°C
- Current sensing resistor
- Resistance range from 0.002Ω to 0.025Ω
- Tolerances from ±1%
- TCR from 100 ppm/K
- Power rating of 2W (at 120°C)
- Temperature range from -55°C to +170°C
- 4-terminal cureent sensing resistor
- Resistance range from 0.0002Ω to 0.005Ω
- Tolerances of ±1% and ±5%
- TCR of <20ppm/K or <50ppm/K
- Power rating 12W (at 70°C)
- Temperature range from -65°C to +170°C
- Current sensing resistor
- Resistance range from 0.0001Ω to 0.002Ω
- Tolerance ±1.0% and ±5.0%
- TCR from 50 ppm/K
- Power rating of 15W (at +70°C)
- Temperature range from -55°C to +170°C