+44 (0)1342 330 470

UL

Underwriters Laboratories® Inc. (UL) is an independent product safety certification organization Based in Northbrook, Illinois.

UL develops standards and test procedures for products, materials, components, assemblies, tools and equipment, chiefly dealing with product safety.

UL does not “approve” products. Rather it evaluates products, components, materials and systems for compliance to specific requirements, and permits acceptable products to carry a UL certification mark, as long as they remain compliant with the standards.

Weidmüller RJ45G1 R1V 3.3N4YG/YG TY series

Through-hole RJ45 transformer jack
Plugging cycles 750
Gold over nickel contact surface
Solder pin length 3.2mm
Black in colour
Temperature range of −40°C to +85°C
EAC approved and UL listed

Weidmüller RJ45G1 R1V 3.3N4YG/YG TY series

Weidmüller RJ45M R1D 3.3N4Y/G TY series

Through-hole RJ45 transformer Jack
Plugging cycles 750
Gold over nickel contact surface
Black in colour
Temperature range of −40°C to +85°C
EAC approved and UL listed

Weidmüller RJ45M R1D 3.3N4Y/G TY series

Weidmüller RJ45M R1V 3.3N4Y/G TY series

Through-hole RJ45 transformer jack
Plugging cycles 750
Gold over nickel contact surface
Black in colour
Temperature range of −40°C to +85°C
EAC approved and UL listed

Weidmüller RJ45M R1V 3.3N4Y/G TY series

Weidmüller RJ45M R1V 3.3N4YG/YG TY series

Through-hole RJ45 transformer jack
Plugging cycles 750
Gold over nickel contact surface
Solder pin length 3.2mm
Black in colour
Temperature range of −40°C to +85°C
EAC approved and UL listed

Weidmüller RJ45M R1V 3.3N4YG/YG TY series

Weidmüller RJ45M T12D 3.3E4G/Y RL series

Through-hole RJ45 transformer jack
Plugging cycles 750
Gold over nickel contact surface
Twin port
Black in colour
Temperature range of −40°C to +85°C
EAC approved and UL listed

Weidmüller RJ45M T12D 3.3E4G/Y RL series

Weidmüller RJ45M T1D 3.2E4N TY series

Through-hole RJ45 transformer jack
Plugging cycles 750
Gold over nickel contact surface
Solder pin length 3.2mm
Black in colour
Temperature range of −40°C to +85°C
EAC approved and UL listed

Weidmüller RJ45M T1D 3.2E4N TY series

Weidmüller S2C-SMT 3.50/180G Series

PCB terminal connector with male header and closed housing
Rated current for minimum number of poles 13.4A (IEC) and 10A (UL)
Dimensions of L1 3.5mm to 59.5.5mm (depending on the number of poles required)
THT or THR solder connection with a solder pin length of 3.5mm
Temperature range −50°C to +105°C
CSA and UL 1059 approved, IEC listed

Weidmüller S2C-SMT 3.50

Weidmüller SL 2.50/90G Series

PCB terminal connector with male header and closed housing
Rated current for minimum number of poles 6A (IEC) and 5A (UL)
Dimensions of L1 2.5mm to 27.5mm (depending on the number of poles required)
THT solder connection with a solder pin length of 3.2mm
Temperature range −40°C to +105°C
CSA and UL 1059 approved, IEC listed

Weidmüller SL 2.50

RARA ULF100C

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.1kΩ
Power rating of 100W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRF Series

Download Datasheet

RARA ULF100C

Weidmüller SL 3.50/180G Series

PCB terminal connector with male header and closed housing
Rated current for minimum number of poles 17A (IEC) and 10A (UL)
Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
THT solder connection with a solder pin length of 3.2mm
Temperature range −50°C to +100°C
CSA and UL 1059 approved, IEC listed

Weidmüller SL 3.50

RARA ULF150C

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.75kΩ
Power rating of 150W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRF Series

Download Datasheet

RARA ULF150C

Weidmüller SL 5.08HC/180B Series

PCB terminal connector with male header
Rated current for minimum number of poles 24A (IEC) and 18.5A (UL)
Dimensions of L1 5.08mm to 116.84mm (depending on the number of poles required)
THT solder connection with a solder pin length of 3.2mm
Temperature range −50°C to +100°C
CSA and UL 1059 approved, IEC listed

Weidmüller SL 5.08HC

RARA ULF200C

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 2.2kΩ
Power rating of 200W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRF Series

Download Datasheet

RARA ULF200C

Weidmüller SL-SMT 3.50/180G Series

PCB terminal connector with male header and closed housing
Rated current for minimum number of poles 15A (IEC) and 10A (UL)
Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
Pin length of 3.2mm suitable for wave or reflow soldering
Temperature range −50°C to +100°C
CSA and UL 1059 approved, IEC listed

Weidmüller SL-SMT 3.50

Weidmüller SL-SMT 3.50/90G Series

PCB terminal connector with male header and closed housing
Rated current for minimum number of poles 15A (IEC) and 10A (UL)
Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
Pin length of 3.2mm suitable for wave or reflow soldering
Temperature range −50°C to +100°C
CSA and UL 1059 approved, IEC listed

Weidmüller SL-SMT 3.50

RARA ULF250C

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 2.79kΩ
Power rating of 250W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For Non UL Approval see the IRF Series

Download Datasheet

RARA ULF250C