EV & Automotive

Thanks to our portfolio of industry-leading manufacturers, we are able to offer a wide selection of AEC-Q200 compliant resistors as well as some AEC-Q100 qualified sensors.

Our resistor range developed for automotive applications such as electric vehicle charging and battery management systems includes a selection of high-quality current sensing resistors and shunts by Isabellenhütte in addition to a variety of thin-film and metal-foil chip resistors by Susumu which are compliant to the automotive AEC-Q200 standard.

We also offer a range of sensor products meeting AEC-Q100 qualifications including foil thermocouple temperature sensors by RdF, pressure sensors by Merit Sensor, load cells from Stellar Technology and NVE’s smart magnetometer based on their TMR technology.

The IVT-S module from Isabellenhütte, is an innovative solution for battery management system applications. This plug-and-play sensor is ideal for precise current and voltage measurement and is widely used within the automotive industry.

EV & Automotive

SRT Microcéramique High Power Low Frequency Capacitor Series

MLCC high power, low capacitance variation with voltage capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique High Temperature NP0 Capacitor Series

High Temperature, ultra stable MLCC Capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique High Temperature X7R Capacitor Series

High Temperature MLCC Capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique High Voltage NP0 Capacitor Series (200V-1kV)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique High Voltage NP0 Capacitor Series (2kV-10kV)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microceramique

SRT Microcéramique High Voltage X7R Capacitor Series (200V-1kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique High Voltage X7R Capacitor Series (2kV-10kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique Low Inductance Capacitor Series

Low inductance capacitors for high energy transfer
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 2.5% at 1KHz
Insulation resistance of 20°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less

SRT Microcéramique

SRT Microcéramique Low Voltage BX Capacitor Series (50-100V)

Stable ceramic capacitor
Better voltage behaviour compared to X7R dielectric
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique Low Voltage High Capacitance X5R Capacitors

High capacitance SMD capacitors
Capacitance from 1.0µF to 330µF
TCR of ±15% with 0Vdc applied
Voltages from 4V to 50V
IR 25°C/Un 10⁴MΩ / 500Ω-Farad whichever is less *
Dielectric X5R
Operating temperatures of -55°C, + 85°C

Download Datasheet

SRT Microcéramique Low Voltage High Capacitance Capacitors X5R

SRT Microcéramique Low Voltage High Capacitance X6S Capacitors

High capacitance SMD capacitors
Capacitance from 1.0µF to 330µF
TCR of ±22% with 0Vdc applied
Voltages from 2.5V to 50V
IR 25°C/Un 10⁴MΩ / 500Ω-Farad whichever is less *
Dielectric X6S
Operating temperatures of -55°C, + 105°C

Download Datasheet

SRT Microcéramique Low Voltage High Capacitance Capacitors X6S

SRT Microcéramique Low Voltage High Capacitance X7R Capacitors

High capacitance SMD capacitors
Capacitance from 1.0µF to 47µF
TCR of ±15% with 0Vdc applied
Voltages from 4V to 100V
IR 25°C/Un 10⁴MΩ / 500Ω-Farad whichever is less *
Dielectric X7R
Operating temperatures of -55°C to +125°C **

Download Datasheet

SRT Microcéramique Low Voltage High Capacitance Capacitors X7R

SRT Microcéramique Low Voltage High Capacitance X7S Capacitors

High capacitance SMD capacitors
Capacitance from 1.0µF to 100µF
TCR of ±22% with 0Vdc applied
Voltages from 4V to 100V
IR 25°C/Un 10⁴MΩ / 500Ω-Farad whichever is less *
Dielectric X7S
Operating temperatures of -55°C to +125°C

Download Datasheet

SRT Microcéramique Low Voltage High Capacitance Capacitors X7S

SRT Microcéramique Low Voltage High Capacitance X7T Capacitors

High capacitance SMD capacitors
Capacitance from 1.0µF to 100µF
TCR of +22% -33% with 0Vdc applied
Voltages from 2.5V to 100V
IR 25°C/Un 10⁴MΩ / 500Ω-Farad whichever is less *
Dielectric X7T
Operating temperatures of -55°C, + 125°C

Download Datasheet

SRT Microcéramique Low Voltage High Capacitance Capacitors X7T

SRT Microcéramique Low Voltage NP0 Capacitor Series (16-100V)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique Low Voltage X7R Capacitor Series (16-100V)

Stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E