Test and Measurement

Range of standard resistors for calibration purposes from Alpha Electronics and Isabellenhütte.

Vast selection of precision and ultra-precision resistors, current sensing shunts and low ohmic resistors and power resistors in various through-hole and surface-mount packages in virtually any resistance value from Alpha Electronics, Caddock, General Resistance, Isabellenhütte, Riedon, Susumu and Vishay Foil Resistors.

Range of NTC and PTC thermistors and inrush current limiters from Ametherm.

High quality, high voltage relays handling up to 15kV from Cynergy3.

Data acquisition modules from DGH with number of analog and digital input and output options, offering possibility to easily set up a customised plug-and-play data acquisition system.

Isabellenhütte’s innovative solution for battery management system applications – the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand.

Robust, high quality general purpose and precision load cells in range of packages by Lord Sensing Stellar Technology.

Variety of magnetic sensors and digital isolators from NVE Corporation based on their patented spintronic GMR technology.

Test and Measurement

SRT Microcéramique High Voltage X7R Capacitor Series (200V-1kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique High Voltage X7R Capacitor Series (2kV-10kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique Low Inductance Capacitor Series

Low inductance capacitors for high energy transfer
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 2.5% at 1KHz
Insulation resistance of 20°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less

SRT Microcéramique

SRT Microcéramique Low Voltage BX Capacitor Series (50-100V)

Stable ceramic capacitor
Better voltage behaviour compared to X7R dielectric
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique Low Voltage High Capacitance X7R Capacitors

High capacitance SMD capacitors
Capacitance from 1.0µF to 47µF
TCR of ±15% with 0Vdc applied
Voltages from 4V to 100V
IR 25°C/Un 10⁴MΩ / 500Ω-Farad whichever is less *
Dielectric X7R
Operating temperatures of -55°C to +125°C **

Download Datasheet

SRT Microcéramique Low Voltage High Capacitance Capacitors X7R

SRT Microcéramique Low Voltage High Capacitance X7S Capacitors

High capacitance SMD capacitors
Capacitance from 1.0µF to 100µF
TCR of ±22% with 0Vdc applied
Voltages from 4V to 100V
IR 25°C/Un 10⁴MΩ / 500Ω-Farad whichever is less *
Dielectric X7S
Operating temperatures of -55°C to +125°C

Download Datasheet

SRT Microcéramique Low Voltage High Capacitance Capacitors X7S

SRT Microcéramique Low Voltage NP0 Capacitor Series (16-100V)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique Low Voltage X7R Capacitor Series (16-100V)

Stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique Non Magnetic NP0 Capacitor Series

Non magnetic NP0 (Type 1) MLCC Capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique Non Magnetic X7R Capacitor Series

Non magnetic X7R (Type 2) MLCC Capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor maximum of 2.5% at 1V_rms and 1kHz for Un between 16V and 25V and maximum 1% at 1V_rms and 1kHz for Un between 25V and 50V
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique NP0 Capacitor Stack Series

NP0 high capacitance value capacitor stacks, ideal for SMPS applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor 10.10^-4 maximum
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less
Dielectric withstanding voltage of 2.5Un for 5s with 50mA maximum charging current

SRT Microcéramique NP0 Capacitor Stack

SRT Microcéramique Radial Dipped NP0 Capacitors (200V – 500V)

Radial dipped NP0 capacitor series
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique Radial Dipped NP0 Capacitors (50V – 100V)

Radial dipped NP0 capacitor series
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique Radial Dipped X7R Capacitors (200V – 500V)

Radial dipped X7R capacitor series
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1Vrms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test of 1.5Un + 100V for 5 seconds with 50mA maximum charging current

SRT Microcéramique

SRT Microcéramique Radial Dipped X7R Capacitors (1kV – 5kV)

Radial dipped X7R capacitor series
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique

SRT Microcéramique Radial Dipped X7R Capacitors (25V – 100V)

Radial dipped X7R capacitor series
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1Vrms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E