Test and Measurement | Industries | Rhopoint Components

+44 (0)1342 330 470

Test and Measurement

Range of standard resistors for calibration purposes from Alpha Electronics and Isabellenhütte.

Vast selection of precision and ultra-precision resistors, current sensing shunts and low ohmic resistors and power resistors in various through-hole and surface-mount packages in virtually any resistance value from Alpha Electronics, Caddock, General Resistance, Isabellenhütte, Riedon, Susumu and Vishay Foil Resistors.

Range of NTC and PTC thermistors and inrush current limiters from Ametherm.

High quality, high voltage relays handling up to 15kV from Cynergy3.

Data acquisition modules from DGH with number of analog and digital input and output options, offering possibility to easily set up a customised plug-and-play data acquisition system.

Isabellenhütte’s innovative solution for battery management system applications – the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand.

Robust, high quality general purpose and precision load cells in range of packages by Lord Sensing Stellar Technology.

Variety of magnetic sensors and digital isolators from NVE Corporation based on their patented spintronic GMR technology.

SRT Microcéramique Radial Moulded Capacitors (63V – 250V)

SRT Microcéramique Radial Moulded Capacitor (63V - 250V)

Radial moulded capacitor series for military applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1Vrms and 1kHz
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Climatic category: 55/125/56

SRT Microcéramique RF Power High Frequency Capacitor Series

SRT Microcéramique RF Power High Frequency Capacitor

MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique X7R Capacitor Stack Series

SRT Microcéramique X7R Capacitor Stack

X7R capacitor stacks, ideal for input/output filtering in SMPS applications
Highest quality and reliability, suitable for safety-critical industries
Maximum dissipation factor of 2.5% at 1V_rms, 1kHz, 25°C
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less
Dielectric withstanding voltage of 2.5Un for 5s with 50mA maximum charging current

Stellar Technology PNC700 Series

Pancake Load Cell

General purpose, high accuracy pancake tension and compression load cell
Barometric compensation
Shock and vibration resistant
Low profile design
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Stellar Technology PNC710 Series

General Purpose Tension and Compression Pancake Load Cell

General purpose, high accuracy pancake tension and compression load cell
Barometric compensation
Shock and vibration resistant
Low profile design
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Stellar Technology PNC720 Series

General Purpose Compression Pancake Load Cell

General purpose, high accuracy pancake tension and compression load cell
Hysteresis of 0.08% FSO
Barometric compensation
Shock and vibration resistant
Low profile design
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Stellar Technology PNC770 Series

Precision Pancake Load Cells

Low profile, lightweight and precise pancake load cell
Low off-axis sensitivity
Barometric compensation
Shock and vibration resistant
Compact size with integral base with integral cable
Life cycle of 10 million
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Stellar Technology PNC772 Series

Precision Pancake Load Cells

Low profile, lightweight and precise pancake load cell
Low off-axis sensitivity
Barometric compensation
Shock and vibration resistant
Compact size with integral base and bolt-on flange electrical connector
Life cycle of 10 million
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Stellar Technology RDE900 Series

Rod-End Tension Load Cell

Shackle ready, rod end load cell
In line tension
Variety of thread combinations
Shock and vibration resistant
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.005% FSO/°F
Temperature effect on span ±0.005% Reading/°F
Zero balance ±1% FSO

Stellar Technology RDE905 Series

Rod-End Compression and Tension Load Cell

General purpose rod end compression and tension load cell
High off-axis capability of up to 20% of full scale loads
Variety of thread combinations available
Shock and vibration resistant
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero of ±0.005% FSO/°F
Temperature effect on span ±0.005% Reading/°F
Zero balance ±1% FSO

Stellar Technology RDE915 Series

Rod-End Tension and Compression Load Cell

Compact, high capacity rod end compression and tension load cell
Environmentally sealed
Low defection
Shock and vibration resistant
High strength tool steel
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.005% FSO/°F
Temperature effect on span ±0.005% Reading/°F
Zero balance ±1% FSO

Stellar Technology VLC856 Series

Subminiature Compression Load Cell

General purpose subminiature compression load cell
Small size
Shock and vibration resistant
All welded stainless steel
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.01% FSO/°F
Temperature effect on span ±0.01% Reading/°F
Zero balance ±3% FSO

Stellar Technology VLU850 Series

Subminiature Tension and Compression Load Cell

General purpose subminiature tension or compression load cell
Small size
Shock and vibration resistant
All welded stainless steel
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.01% FSO/°F
Temperature effect on span ±0.01% Reading/°F
Zero balance ±3% FSO

Susumu NRG1608 Series

Surface-mount non-magnetic metal thin film chip precision resistor

Surface-mount non-magnetic metal thin film chip precision resistor
Temperature range of −55°C to +155°C
Maximum voltage of 100V
Thin film structure enabling low noise and anti-sulfur.

Susumu NRG2012 Series

Surface-mount non-magnetic metal thin film chip precision resistor

Surface-mount non-magnetic metal thin film chip precision resistor
Temperature range of −55°C to +155°C
Maximum voltage of 150V
Thin film structure enabling low noise and anti-sulfur

Susumu NRG3216 Series

Surface-mount non-magnetic metal thin film chip precision resistor

Surface-mount non-magnetic metal thin film chip precision resistor
Temperature range of −55°C to +155°C
Maximum voltage of 200V
Thin film structure enabling low noise and anti-sulfur

Resources

Related Articles