30W

Isabellenhütte BAN-AL Series

Isabellenhütte BAN-AL Busbar Shunt
  • ISA-WELD® precision resistor, a busbar shunt with weldable aluminium terminals
  • Resistance value 25µΩ, manufactured to ±5%
  • Continuous current load up to 1095A at 25µΩ
  • Permanent power up to 30W at 25µΩ
  • Tensile strength above 50MPa
  • Applicable temperature range -40°C to +170°C
  • AEC-Q200 qualified, RoHS

Isabellenhütte BAS Series

Current Sensing Precision Shunt Resistor
  • Shunt resistor
  • 8420 package size
  • Resistance range from 35µΩ to 500µΩ
  • Tolerance of ±5.0%
  • TCR from <±50 ppm/°C
  • Power rating of 36W
  • Temperature range from -40°C to +170°C

Caddock MP930 Series

Kool-Pak® Power Film Resistors
  • TO-220 style Kool-Pak® power through-hole resistor
  • Heat sink mountable design featuring an exposed ceramic heat dissipating mounting surface
  • Non-inductive design
  • Constructed with Caddock’s Micronox® resistance film technology
  • Maximum voltage rating of 250V
  • Operation up to +150°C case temperature

Talk to an Engineer

Get help specifying or customising the right product for your application.

Caddock MP930-1.00k-1%

Kool-Pak® Power Film Resistors
  • TO-220 style Kool-Pak® power through-hole resistor
  • Heat sink mountable design featuring an exposed ceramic heat dissipating mounting surface
  • Non-inductive design
  • Constructed with Caddock’s Micronox® resistance film technology
  • Maximum voltage rating of 250V
  • Operation up to +150°C case temperature

Caddock MP930-1.50k-1%

Kool-Pak® Power Film Resistors
  • TO-220 style Kool-Pak® power through-hole resistor
  • Heat sink mountable design featuring an exposed ceramic heat dissipating mounting surface
  • Non-inductive design
  • Constructed with Caddock’s Micronox® resistance film technology
  • Maximum voltage rating of 250V
  • Operation up to +150°C case temperature

Caddock MP930-100-1%

Kool-Pak® Power Film Resistors
  • TO-220 style Kool-Pak® power through-hole resistor
  • Heat sink mountable design featuring an exposed ceramic heat dissipating mounting surface
  • Non-inductive design
  • Constructed with Caddock’s Micronox® resistance film technology
  • Maximum voltage rating of 250V
  • Operation up to +150°C case temperature

Caddock MP930-3.00-1%

Kool-Pak® Power Film Resistors
  • TO-220 style Kool-Pak® power through-hole resistor
  • Heat sink mountable design featuring an exposed ceramic heat dissipating mounting surface
  • Non-inductive design
  • Constructed with Caddock’s Micronox® resistance film technology
  • Maximum voltage rating of 250V
  • Operation up to +150°C case temperature

Caddock MP930-47.0-1%

Kool-Pak® Power Film Resistors
  • TO-220 style Kool-Pak® power through-hole resistor
  • Heat sink mountable design featuring an exposed ceramic heat dissipating mounting surface
  • Non-inductive design
  • Constructed with Caddock’s Micronox® resistance film technology
  • Maximum voltage rating of 250V
  • Operation up to +150°C case temperature

Susumu HPT Series

Surface-mount high power thin film chip resistor
  • Surface-mount high power thin film chip terminator
  • Rated operating temperature of +100°C at terminal
  • Wrap around terminals for easy and reliable soldering
  • Aluminum nitride substrate
  • Efficient heat dissipation

RARA RH50 (Inductive)

High Power Metal Clad Resistors
  • Metal clad wire wound resistor
  • Resistance range between 0.68Ω and 50kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect

RARA RH50 (Non-Inductive)

High Power Metal Clad Resistors
  • Metal clad wire wound resistor
  • Resistance range between 0.2Ω and 20kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect

Custom Component Solutions

Working alongside your design team from the earliest stage, we help you select the right part for the application and, where a standard part will not do, develop customised components with our manufacturing partners such as lead length, termination and package size.

Related Components

Manufacturers

Looking for 30W?

The below manufacturers are all of our authorised partners that produce 30W or related products.

30W