CSA
CSA International (Canadian Standards Association) is a member of the CSA Group that provides product testing and certification services for electrical, mechanical, plumbing, gas and a variety of other products.
CSA International certification marks indicate that a product, process or service has been tested to a Canadian or U.S. standard and it meets the requirements of an applicable CSA standard or another recognized document used as a basis for certification.
- Inrush current limiting thermistor
- Resistance of 2Ω (at 25°C)
- Maximum steady state current of 18A
- Maximum recommended energy of 90J
- Voltage ratings of 120VAC and 240VAC
- Body temperature of +214°C at maximum current
- Inrush current limiting thermistor
- Resistance of 40Ω (at 25°C)
- Maximum steady state current of 5A
- Maximum recommended energy of 63J
- Voltage ratings of 120VAC and 240VAC
- Body temperature of +162°C at maximum current
- Non-incendive pressure transducer
- Pressure ranges from 50 PSI to 30,000 PSI
- Accuracy of ≤±0.25% BFSL at 25°C
- Stability of ≤±0.25% of FS
- Pressure cycles of 100 million
- Overpressure of 2x minimum
- Burst pressure of 5x or 60,000 PSI
- Non-incendive low pressure transducer
- Pressure ranges from 1 PSI up to 49 PSI
- Temperature range from −20°C up to +80°C *
- Accuracy of ≤±0.25% BFSL at 25°C **
- Stability of ≤±0.25% of FS (1 year)
- Pressure cycles of 100 million
- Overpressure of 2x minimum
- Explosion-Proof Pressure Transducer
- Pressure ranges from 50 PSI to 30,000 PSI
- One piece diaphragm design – No internal O-rings or welds
- Factory sealed stainless steel case – Withstands harsh environments
- Accuracy of ≤±0.25% BFSL at 25°C (<10,000 PSI)
- Pressure cycles of 100 million
- Overpressure of 2x minimum
- Intrinsically safe pressure transducer
- Pressure ranges available from 50 PSI up to 30,000 PSI
- Temperature range −40°C to +85°C
- Accuracy of ≤ ±0.25% BFSL
- Burst pressure of 5x or 60,000 PSI whichever is less
- Stability (1 year) of ≤ ±0.25% of FS
- Pressure cycles of 100 million
- Intrinsically safe low pressure transducer
- Pressure ranges from 1 PSI to 49 PSI
- Accuracy of ≤±0.25% BFSL
- Stability of ≤±0.25% of FS (1 year)
- Pressure cycles of 100 million
- Overpressure of 2x minimum
- Burst pressure of 5x or 245 PSI
- Intrinsically safe submersible pressure transducer
- Pressure ranges from 1 PSI up to 50 PSI
- Accuracy of ≤±0.25% BFSL
- Stability of ≤±0.25% of FS (1 year)
- Pressure cycles of 50 million
- Overpressure of 2x minimum
- Burst pressure of 5x or 250 PSI
- Intrinsically safe differential pressure transducer
- Differential pressure up to 50 PSI
- Maximum line pressure of 500 PSI
- Bi-directional pressure ranges
- Accuracy of ≤±0.25% BFSL
- Stability of ≤±0.25% of FS
- Pressure cycles of 4 million
- High precision pressure and temperature transmitter with programmable temperature Output: °F or °C
- Withstands harsh and extreme environments for durability in tough applications
- Customisable transmitter options available for fit-for-use designs
- Multipurpose clevis pin load cell with extra robust electrical connectors
- Shock and vibration resistant
- All welded stainless steel construction
- Standard calibration is 5 points (0, 50%, 100%, 50%, 0) in both tension and compression
- Temperature effect on zero ±0.008% FSO/°F
- Temperature effect on span ±0.005% Reading/°F
- Zero balance ±1% FSO
- Shackle ready, rod end load cell
- In line tension
- Variety of thread combinations
- Shock and vibration resistant
- All welded stainless steel construction
- 5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
- Temperature effect on zero ±0.005% FSO/°F
- Temperature effect on span ±0.005% Reading/°F
- Zero balance ±1% FSO
- PCB terminal connector with 2 row female plug
- Rated current for minimum number of poles 13.4A (IEC) and 9.5A (UL)
- Dimensions of L1 3.5mm to 76.5mm (depending on the number of poles required)
- Push in spring connection with integrated push buttons for opening the terminal point
- Clamping range from 0.14mm² to 1.5mm²
- Temperature range −50°C up to +120°C
- CSA and UL 1059 approved, IEC listed
- Female plug in connector
- Rated current for minimum number of poles 17A (IEC) and 10A (UL)
- Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
- Clamping yoke screw connection
- Clamping range from 0.08mm² to 1.5mm²
- Wire connection cross section from AWG 28 to AWG 14
- Temperature range −50°C up to +100°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector with female plug
- Rated current for minimum number of poles 6A (IEC) and 5A (UL)
- Dimensions of L1 2.5mm to 27.5mm (depending on the number of poles required)
- Push in spring connection with integrated push buttons for opening the terminal point
- Wire connection cross section from AWG28 (0.08mm²) to AWG 20 (0.5mm²)
- Temperature range −40°C up to +105°C
- CSA and UL 1059 approved, IEC listed
- Female plug in connector
- Rated current for minimum number of poles 17.5A (IEC) and 10A (UL)
- Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
- Push in spring connection
- Clamping range from 0.14mm² to 1.5mm²
- Wire connection cross section from AWG 26 to AWG 16
- Temperature range −50°C up to +120°C
- CSA and UL 1059 approved, IEC listed