+44 (0) 1342 330 470

Test and Measurement

Range of standard resistors for calibration purposes from Alpha Electronics and Isabellenhütte.

Vast selection of precision and ultra-precision resistors, current sensing shunts and low ohmic resistors and power resistors in various through-hole and surface-mount packages in virtually any resistance value from Alpha Electronics, Caddock, General Resistance, Isabellenhütte, Riedon, Susumu and Vishay Foil Resistors.

Range of NTC and PTC thermistors and inrush current limiters from Ametherm.

High quality, high voltage relays handling up to 15kV from Cynergy3.

Data acquisition modules from DGH with number of analog and digital input and output options, offering possibility to easily set up a customised plug-and-play data acquisition system.

Isabellenhütte’s innovative solution for battery management system applications – the IsaSCALE IVT-S is a plug-and-play module for precise current and voltage measurement in package fitting into palm of your hand.

Robust, high quality general purpose and precision load cells in range of packages by Lord Sensing Stellar Technology.

Variety of magnetic sensors and digital isolators from NVE Corporation based on their patented spintronic GMR technology.

Test and Measurement

Metis Engineering Cell Guard

Cell Guard is a CAN-based environmental sensor for use with Battery Packs in Energy Storage Systems and Electric Vehicles. It measures absolute pressure, air temperature, VOCs, absolute humidity, relative humidity, dew point temperature, and shock load and duration.

For quick desktop analysis, use alongside the Nano Development Kit.

Nano Development Kit

The Nano Development Kit can be used alongside 3 environmental sensors: Cell Guard, H Guard and Air Wise. In order to quickly plug in and evaluate your sensor, use this Development Board which has all the necessary cables to plug into a CAN adaptor.

Includes:

Development Board
Power Supply
Sensor Cables
DB9 Cable

Sensors not included

NVE ACT001-10E

TMR isolated current sensor
Low current detection & measurement
On-chip current strap for precise operation
Linear range of −500mA to +500mA
Sensitivity of 0.04 V/V-mA
Ultraminiature DFN6 Package

NVE AD004-00E

Omnipolar digital Giant Magnetoresistive (GMR) switch sensor
Operates at a magnetic field strength of 2 mT
Supply voltage range: 4.5 V to 30 V
Low supply current: 1.8 mA
High-frequency response up to 250 kHz
Compact MSOP8 surface-mount package

NVE AHT922-01

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 4.5mT

NVE AHT922-14E

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 4.5mT

NVE AHT923-01

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 3.2mT

NVE AHT923-14E

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 3.2mT

NVE AHT924-01

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 2.2mT

NVE AHT924-14E

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 2.2mT

NVE AHT925-01

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 1.5mT

NVE AHT925-14E

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 1.5mT

NVE ALT025-10E

Analog TMR bridge sensor
Revolutionary bipolar differential output
Large signals, typically 20 mV/V/mT
Linear range of ±10 mT (±100 Oe)
Ultra-low temperature coefficient of output (±0.1 %/°C)

NVE IL260-1E

High Speed digital isolators
Five channel, unidirectional isolation
2.5kV_RMS isolation voltage
600V_RMS woking voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
No carrier or clock for low EMI emissions and susceptibility
Quiescent current of 0.0012A per channel minimum
2ns typical pulse width distortion
100ps pulse jitter
4ns typical propagation delay skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
QSOP package

NVE IL260-3E

High Speed digital isolators
Five channel, unidirectional isolation
2.5kV_RMS isolation voltage
600V_RMS woking voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
No carrier or clock for low EMI emissions and susceptibility
Quiescent current of 0.0012A per channel minimum
2ns typical pulse width distortion
100ps pulse jitter
4ns typical propagation delay skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
1.5″ 16-pin SOIC package

NVE IL260E

High Speed digital isolators
Five channel, unidirectional isolation
2.5kV_RMS isolation voltage
600V_RMS woking voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
No carrier or clock for low EMI emissions and susceptibility
Quiescent current of 0.0012A per channel minimum
2ns typical pulse width distortion
100ps pulse jitter
4ns typical propagation delay skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.3″ SOIC package

Metis Engineering Cell Guard

Cell Guard is a CAN-based environmental sensor for use with Battery Packs in Energy Storage Systems and Electric Vehicles. It measures absolute pressure, air temperature, VOCs, absolute humidity, relative humidity, dew point temperature, and shock load and duration.

For quick desktop analysis, use alongside the Nano Development Kit.

Nano Development Kit

The Nano Development Kit can be used alongside 3 environmental sensors: Cell Guard, H Guard and Air Wise. In order to quickly plug in and evaluate your sensor, use this Development Board which has all the necessary cables to plug into a CAN adaptor.

Includes:

Development Board
Power Supply
Sensor Cables
DB9 Cable

Sensors not included

NVE ACT001-10E

TMR isolated current sensor
Low current detection & measurement
On-chip current strap for precise operation
Linear range of −500mA to +500mA
Sensitivity of 0.04 V/V-mA
Ultraminiature DFN6 Package

NVE AD004-00E

Omnipolar digital Giant Magnetoresistive (GMR) switch sensor
Operates at a magnetic field strength of 2 mT
Supply voltage range: 4.5 V to 30 V
Low supply current: 1.8 mA
High-frequency response up to 250 kHz
Compact MSOP8 surface-mount package

NVE AHT922-01

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 4.5mT

NVE AHT922-14E

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 4.5mT

NVE AHT923-01

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 3.2mT

NVE AHT923-14E

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 3.2mT

NVE AHT924-01

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 2.2mT

NVE AHT924-14E

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 2.2mT

NVE AHT925-01

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 1.5mT

NVE AHT925-14E

Low voltage, nanopower TMR digital switch
In-plane direction of sensitivity
Omnipolar – output is activated if magnetic field of either polarity is applied
Continuous operation for low noise and high-speed
Ultrasensitive operate point, as low as 1.5mT

NVE ALT025-10E

Analog TMR bridge sensor
Revolutionary bipolar differential output
Large signals, typically 20 mV/V/mT
Linear range of ±10 mT (±100 Oe)
Ultra-low temperature coefficient of output (±0.1 %/°C)

NVE IL260-1E

High Speed digital isolators
Five channel, unidirectional isolation
2.5kV_RMS isolation voltage
600V_RMS woking voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
No carrier or clock for low EMI emissions and susceptibility
Quiescent current of 0.0012A per channel minimum
2ns typical pulse width distortion
100ps pulse jitter
4ns typical propagation delay skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
QSOP package

NVE IL260-3E

High Speed digital isolators
Five channel, unidirectional isolation
2.5kV_RMS isolation voltage
600V_RMS woking voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
No carrier or clock for low EMI emissions and susceptibility
Quiescent current of 0.0012A per channel minimum
2ns typical pulse width distortion
100ps pulse jitter
4ns typical propagation delay skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
1.5″ 16-pin SOIC package

NVE IL260E

High Speed digital isolators
Five channel, unidirectional isolation
2.5kV_RMS isolation voltage
600V_RMS woking voltage per VDE V 0884-10
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
No carrier or clock for low EMI emissions and susceptibility
Quiescent current of 0.0012A per channel minimum
2ns typical pulse width distortion
100ps pulse jitter
4ns typical propagation delay skew
44000 year barrier life
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.3″ SOIC package

Resources

Related Articles