1.5W

Isabellenhütte 25005/VMP (2010)

DLA | Precision Current Sense Resistor
  • DLA-qualified precision current sense resistor
  • Constant current up to 17A (5mOhm)
  • Resistance range from 0.005Ω to 1Ω
  • Tolerance of ±0.5% or ±1%
  • Two-terminal configuration
  • Power rating up to 1.5W (at +70°C)
  • Temperature range from -65°C to +170°C

Isabellenhütte FMK Series

Current Sensing Precision Shunt Resistor
  • Current sensing resistor
  • Surface-mount 1206 chip size
  • Resistance range from 0.002Ω to 0.006Ω
  • Tolerances of ±1% and ±10%
  • TCR of <50 ppm/°C
  • Power rating up to 3.5W at 70°C
  • Temperature range from -65°C to +170°C

Isabellenhütte FMP Series

Current Sensing Precision Shunt Resistor
  • Current sensing resistor
  • Surface-mount 2010 chip size
  • Resistance range from 0.0015Ω to 0.006Ω
  • Tolerances of ±1.0% and ±5.0%
  • TCR of <50 ppm/K
  • Power rating up to 4W (at 70°C)
  • Temperature range from -65°C to +170°C

Talk to an Engineer

Get help specifying or customising the right product for your application.

Isabellenhütte VMK Series

Current Sensing Precision Resistor
  • Current sensing precision resistor
  • 2-terminal surface-mount design in a 1206 chip size
  • Resistance range from 0.01Ω to 0.47Ω
  • Tolerance range from ±1% to ±5%
  • TCR of <±20 ppm/°C
  • Power rating up to 1.5W
  • Temperature range from -65°C to +170°C

SRT CHP Series

Power Chip Resistors on Aluminium‑Nitride Substrates (AlN)
Thick-film power chip resistors on aluminium-nitride substrates in sizes 1216, 2010, 2040, 2512 and 4020, with power ratings up to 2.5 W at 70 °C and operating temperatures from -55 °C to +200 °C. High thermal conductivity AlN and optional untrimmed versions support efficient heat spreading and enhanced pulse performance.

Caddock CC2015WB Series

Low Resistance Precision Chip Resistors
  • Low resistance precision wire-bondable surface-mount resistor
  • Metalised back surface for soldering to a heat sink with bondable termination pads
  • 2-terminal current sense resistor with 4-terminal connections available (see datasheet for further details)
  • Chip size of 2015
  • Aluminium wire to be used for bonding
  • Inductance of less than 5nH typical
  • Maximum chip temperature of +150°C
  • Temperature range of -55°C to +150°C

Caddock CC2520FC Series

Low Resistance Precision Chip Resistors
  • Low resistance precision flip-chip surface-mount resistor
  • 2-terminal current sense resistor with recommended 4-terminal PCB layout
  • Chip size of 2520
  • Solder coated pads between 0.01Ω and 0.02Ω, solderable pads between 0.025Ω and 10Ω
  • Inductance of less than 5nH typical
  • Maximum chip temperature of +150°C
  • Temperature range of -55°C to +150°C

Caddock CD2520FC Series

Low Resistance Precision Chip Resistors
  • Low resistance precision flip-chip surface-mount resistor
  • Utilises the proven Caddock Micronox® resistance films to achieve the unique low resistance range
  • Pedestal terminal design helps maintain precision and its copper core provides heat spreading which enhances the high power handling capabilities
  • Chip size of 2520
  • Bare ceramic back surface
  • Inductance of less than 5nH typical
  • Maximum chip temperature of +150°C
  • Temperature range of -55°C to +150°C

Caddock MG -15 Range

Precision High Voltage Resistors
  • Cylindrical high voltage axial leaded resistor
  • Maximum operating voltage from 960V up to 48kV *
  • Resistance values from 6.5MΩ up to 2GΩ *
  • Tolerances of ±1% and ±5%
  • TCR as tight as ±80 ppm/°C from -15°C to +105°C
  • Maximum power rating from 0.5W up to 15W *
  • Operating Temperature Range of -55°C to +225°C
* Dependant on selected resistor model

Caddock MG Extended Range

Precision High Voltage Resistors
  • Cylindrical high voltage axial leaded resistor
  • Maximum operating voltage from 2kV up to 30kV *
  • Resistance values from 600Ω up to 10GΩ *
  • Tolerances of ±1% and ±5%
  • TCR as tight as ±80 ppm/°C from +25°C to +105°C
  • Operating Temperature Range of -55°C to +225°C
  • Maximum power rating from 1.5W up to 15W *
* Dependant on selected resistor model

Caddock MG Standard Range

Precision High Voltage Resistors
  • Cylindrical high voltage axial leaded resistor
  • Maximum operating voltage from 600V up to 30kV *
  • Resistance values from 200Ω up to 2GΩ *
  • Tolerances of ±0.1%, ±0.25%, ±0.5% and ±1%
  • TCR as tight as ±80 ppm/°C from -15°C to +105°C
  • Maximum power rating from 0.5W up to 15W *
  • Operating Temperature Range of -55°C to +225°C
* Dependant on selected resistor model

Caddock MV Series

Low Resistance Power Film Resistors
  • Low resistance high temperature power axial leaded through-hole resistor
  • Maximum operating temperature up to +275°C
  • Utilises Caddock’s Micronox® resistance film
  • Five sizes and power ratings
  • Utilises Caddock’s non-inductive design

Caddock TG Series

Low TC Precision High Voltage Resistors
  • Precision high voltage axial leaded through-hole resistor
  • Resistance range: 25 kΩ to 1,000 MΩ
  • Temperature coefficient: ±25 ppm/°C from -55°C to +125°C
  • Load life stability: 0.25% per 1,000 hours at +125°C
  • Resistance tolerance options: ±0.1%, ±0.25%, ±0.5%, ±1%
  • Maximum continuous operating voltage up to 30 kV
  • -15 series increases maximum voltage by 60%

Susumu KRL2550 Series

KRL2550 Current sensing chip resistor
  • Current sensing surface-mount chip resistor
  • Short sided terminal design with an 2010 chip size
  • Resistance values from 0.05Ω to 0.5Ω
  • Temperature range options of −55°C to +155°C / +175°C
  • Tolerance of ±1% or ±2%
  • Power rating of 1.5W
  • Certified AEC-Q200 compliant

Susumu KRL3216 Series

KRL3216 Current sensing chip resistor
  • Current sensing surface-mount chip resistor
  • Long sided terminal design with a 1206 chip size
  • Resistance values from 0.001Ω to 0.5Ω
  • Temperature range options of −55°C to +155°C / +175°C
  • Tolerance of ±1%, ±2% or ±5%
  • Power rating of 1.5W
  • Certified AEC-Q200 compliant

Susumu PRG5020 Series

Surface-mount high power thin film chip resistor
  • Surface-mount high power thin film chip resistor
  • Temperature range of −55°C to +155°C
  • Maximum voltage of 200V
  • Thin film structure enabling low noise and anti-sulfur
  • Long sided terminals for higher power handling capability
  • AEC-Q200 compliant

Custom Component Solutions

Working alongside your design team from the earliest stage, we help you select the right part for the application and, where a standard part will not do, develop customised components with our manufacturing partners such as lead length, termination and package size.

Related Components

Manufacturers

Looking for 1.5W?

The below manufacturers are all of our authorised partners that produce 1.5W or related products.

1.5W