NP0 (C0G) Chip ceramic capacitor with negative TC
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kH (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique High Frequency Capacitor Series

MLCC Capacitor for RF and Microwave communication
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique High Power Low Frequency Capacitor Series

MLCC high power, low capacitance variation with voltage capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique High Temperature NP0 Capacitor Series

High Temperature, ultra stable MLCC Capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Add to Compare

SRT Microcéramique Stacked Capacitor High Voltage 1kV

High Voltage Stacked Capacitor
High Voltage Capability (1kV to 10kV)
Stacked MLCC Construction for High Capacitance
Available in NP0, N2T, and X7R dielectrics
Low ESR/ESL for High-Frequency Efficiency
100% tested at elevated temperatures (125°C) and voltages for 48 hours

SRT Microcéramique Stacked Capacitor High Voltage 2kV

High Voltage Stacked Capacitor
High Voltage Capability (1kV to 10kV)
Stacked MLCC Construction for High Capacitance
Available in NP0, N2T, and X7R dielectrics
Low ESR/ESL for High-Frequency Efficiency
100% tested at elevated temperatures (125°C) and voltages for 48 hours

SRT Microcéramique Stacked Capacitor High Voltage 3kV

High Voltage Stacked Capacitor
High Voltage Capability (1kV to 10kV)
Stacked MLCC Construction for High Capacitance
Available in NP0, N2T, and X7R dielectrics
Low ESR/ESL for High-Frequency Efficiency
100% tested at elevated temperatures (125°C) and voltages for 48 hours

SRT Microcéramique Stacked Capacitor High Voltage 5kV

High Voltage Stacked Capacitor
High Voltage Capability (1kV to 10kV)
Stacked MLCC Construction for High Capacitance
Available in NP0, N2T, and X7R dielectrics
Low ESR/ESL for High-Frequency Efficiency
100% tested at elevated temperatures (125°C) and voltages for 48 hours

SRT Microcéramique Stacked Capacitor High Voltage 8kV

High Voltage Stacked Capacitor
High Voltage Capability (1kV to 10kV)
Stacked MLCC Construction for High Capacitance
Available in NP0, N2T, and X7R dielectrics
Low ESR/ESL for High-Frequency Efficiency
100% tested at elevated temperatures (125°C) and voltages for 48 hours

Jackcon HI-K DC Capacitor series

DC ceramic disc capacitor
Dissipation factor ≤2.5% (Y5P, Y5T and Y5U models) or ≤5% (Y5V models)
Insulation resistance of 10,000 MΩ min at 100Vdc over 1 minute

Jackcon S-C DC Capacitor series

DC fixed disc class 3 ceramic capacitor
Dissipation factor of ≤5%
Insulation resistance of >1,000MΩ or 20/CR MΩ, whichever is smaller

Jackcon T-C DC Capacitor series

DC ceramic disk capacitor
Dissipation factor under 10.10^-4 at 1V_rms and 1kH (or 1MHz)
Insulation resistance of 10,000 MΩ min at 100Vdc over 1 minute

Jackcon Y1 400VAC Capacitor Series

AC ceramic disc capacitors
Dissipation factor of ≤2.5% or ≤5%
Insulation resistance of 10,000 MΩ min at 100Vdc over 1 minute

Jackcon Y1 HT 400VAC Capacitor Series

AC high temperature ceramic disc capacitors
Dissipation factor of ≤2.5%
Insulation resistance of 10,000 MΩ min at 100Vdc over 1 minute

Jackcon Y2 300VAC Capacitor Series

AC ceramic disc capacitors
Dissipation factor of ≤2.5% or ≤5%
Insulation resistance of 10,000 MΩ min at 100Vdc over 1 minute

Jackcon Y2 HT 300VAC Capacitor Series

AC high temperature ceramic disc capacitors
Dissipation factor of ≤2.5%
Insulation resistance of 10,000 MΩ min at 100Vdc over 1 minute

SRT Microcéramique Chip Capacitors with Negative TC

NP0 (C0G) Chip ceramic capacitor with negative TC
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kH (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Frequency Capacitor Series

MLCC Capacitor for RF and Microwave communication
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Power Low Frequency Capacitor Series

MLCC high power, low capacitance variation with voltage capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Temperature NP0 Capacitor Series

High Temperature, ultra stable MLCC Capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Manufacturers

Looking for Capacitors?

The below manufacturers are all of our authorised partners that produce Capacitors or related products.

Capacitors

As authorised partners of SRT Microcéramique and Jackcon, we supply a wide variety of high-quality ceramic disc and multilayer capacitors. Our range of capacitors includes:

High Temperature
High Voltage
Non-Magnetic
Surface Mount (SMD)
Through-Hole Technology (THT)

These are considered ideal for harsh environments, high temperature and safety-critical applications and are available in a number of different capacitance values, sizes, voltage ratings, and TCR values.

As part of our offering, we are also able to supply custom variants to most options throughout the range. If you would like some assistance in matching a product to your exact requirements, speak to one of our friendly advisors who will be happy to help. Enquire now!

Audio

Energy

EV & Automotive

Healthcare & Medical

Industrial

Military & Defense

Oil & Gas

Renewables

Space

Capacitors

Manufacturers

Looking for Capacitors?

Capacitors