2kV series

  • Caddock
  • Cylindrical high voltage axial leaded resistor
  • Maximum operating voltage from 600V up to 30kV *
  • Resistance values from 200Ω up to 2GΩ *
  • Tolerances of ±0.1%, ±0.25%, ±0.5% and ±1%
  • TCR as tight as ±80 ppm/°C from -15°C to +105°C
  • Maximum power rating from 0.5W up to 15W *
  • Operating Temperature Range of -55°C to +225°C
* Dependant on selected resistor model
  • Caddock
  • Cylindrical high voltage axial leaded resistor
  • Maximum operating voltage from 2kV up to 30kV *
  • Resistance values from 600Ω up to 10GΩ *
  • Tolerances of ±1% and ±5%
  • TCR as tight as ±80 ppm/°C from +25°C to +105°C
  • Operating Temperature Range of -55°C to +225°C
  • Maximum power rating from 1.5W up to 15W *
* Dependant on selected resistor model
  • Exxelia Ohmcraft
  • High Voltage SMD Resistors
  • Resistance range from 10kΩ to 50GΩ
  • Tolerances from ±0.1% to ±20%
  • TCR from ±25 ppm/°C to ±200 ppm/°C
  • Power rating of 1W
  • Voltage rating of 2kV
  • Temperature range from -55°C to +150°C
  • Exxelia Ohmcraft
  • High Voltage Resistors
  • Resistance range from 100kΩ to 1TΩ
  • Tolerances from ±0.1% to ±20%
  • TCR from ±25 ppm/°C to >±200 ppm/°C
  • Power rating of 0.5W
  • Voltage rating of 2kV
  • Temperature range from -55°C to +150°C
  • Exxelia Ohmcraft
  • Military Grade High Voltage SMD Resistors
  • Resistance range from 10kΩ to 50GΩ
  • Tolerances from ±0.1% to ±20%
  • TCR from ±25 ppm/°C to ±200 ppm/°C
  • Power rating of 1W
  • Voltage rating of 2kV
  • Temperature range from -55°C to +150°C
  • SRT Microcéramique
  • MLCC high power, low capacitance variation with voltage capacitors
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Ultra stable ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Stable ceramic capacitor
  • High quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Radial dipped X7R capacitor series
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Radial moulded capacitor series for military applications
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1Vrms and 1kHz
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Climatic Category 55/125/56
  • SRT Microcéramique
  • MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 5.10-4 at 1Vrms and 1MHz for values ≤ 1000pF and under 5.10-4 at 1Vrms and 1KHz for values > 1000pF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • X7R capacitor stacks, ideal for input/output filtering in SMPS applications
  • Highest quality and reliability, suitable for safety-critical industries
  • Maximum dissipation factor of 2.5% at 1Vrms, 1kHz, 25°C
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less
  • Dielectric withstanding voltage of 2.5Un for 5s with 50mA maximum charging current
Please be advised that due to the ongoing supply issues with raw materials affecting the global electronics industry, as well as an increase in orders received by our manufacturing partners, a large number of products are facing increased lead times in recent months. For the latest lead time and stock availability, please contact one of our engineers who will be happy to discuss lead times further and the potential for alternative parts.