+44 (0) 1342 330 470

+44 (0) 1342 330 470

Supporting Manufacturer Information

3kV series

Exxelia Ohmcraft HVCD 4020

High-voltage surface-mount chip divider
Voltage rating up to 3000V
Resistance range from 90MΩ to 10GΩ
Ratio tolerances as tight as ±1%
TCR tracking as low as ±25 ppm/°C
Power rating of 100mW

Exxelia Ohmcraft UHVC 2010

Ultra High Voltage SMD Resistors
Resistance range from 90MΩ to 50GΩ
Tolerances from ±1% to ±20%
TCR of ±100 ppm/°C or ±200 ppm/°C
Voltage rating from 3kV to 6kV
Temperature range from -55°C to +150°C

Exxelia Ohmcraft HVC 2512

High Voltage SMD Resistors
Resistance range from 10kΩ to 50GΩ
Tolerances from ±0.1% to ±20%
TCR from ±25 ppm/°C to ±200 ppm/°C
Power rating of 2W
Voltage rating of 3kV
Temperature range from -55°C to +150°C

Exxelia Ohmcraft MCH 2512

Military Grade High Voltage SMD Resistors
Resistance range from 10kΩ to 50GΩ
Tolerances from ±0.1% to ±20%
TCR from ±25 ppm/°C to ±200 ppm/°C
Power rating of 2W
Voltage rating of 3kV
Temperature range from -55°C to +150°C

SRT Microcéramique High Power Low Frequency Capacitor Series

MLCC high power, low capacitance variation with voltage capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage NP0 Capacitor Series (2kV-10kV)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage X7R Capacitor Series (2kV-10kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Non Magnetic NP0 Capacitor Series

Non magnetic NP0 (Type 1) MLCC Capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Non Magnetic X7R Capacitor Series

Non magnetic X7R (Type 2) MLCC Capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor maximum of 2.5% at 1V_rms and 1kHz for Un between 16V and 25V and maximum 1% at 1V_rms and 1kHz for Un between 25V and 50V
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Radial Dipped X7R Capacitors (1kV – 5kV)

Radial dipped X7R capacitor series
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique RF Power High Frequency Capacitor Series

MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

Exxelia Ohmcraft HVCD 4020

High-voltage surface-mount chip divider
Voltage rating up to 3000V
Resistance range from 90MΩ to 10GΩ
Ratio tolerances as tight as ±1%
TCR tracking as low as ±25 ppm/°C
Power rating of 100mW

Exxelia Ohmcraft UHVC 2010

Ultra High Voltage SMD Resistors
Resistance range from 90MΩ to 50GΩ
Tolerances from ±1% to ±20%
TCR of ±100 ppm/°C or ±200 ppm/°C
Voltage rating from 3kV to 6kV
Temperature range from -55°C to +150°C

Exxelia Ohmcraft HVC 2512

High Voltage SMD Resistors
Resistance range from 10kΩ to 50GΩ
Tolerances from ±0.1% to ±20%
TCR from ±25 ppm/°C to ±200 ppm/°C
Power rating of 2W
Voltage rating of 3kV
Temperature range from -55°C to +150°C

Exxelia Ohmcraft MCH 2512

Military Grade High Voltage SMD Resistors
Resistance range from 10kΩ to 50GΩ
Tolerances from ±0.1% to ±20%
TCR from ±25 ppm/°C to ±200 ppm/°C
Power rating of 2W
Voltage rating of 3kV
Temperature range from -55°C to +150°C

SRT Microcéramique High Power Low Frequency Capacitor Series

MLCC high power, low capacitance variation with voltage capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage NP0 Capacitor Series (2kV-10kV)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage X7R Capacitor Series (2kV-10kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Non Magnetic NP0 Capacitor Series

Non magnetic NP0 (Type 1) MLCC Capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Non Magnetic X7R Capacitor Series

Non magnetic X7R (Type 2) MLCC Capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor maximum of 2.5% at 1V_rms and 1kHz for Un between 16V and 25V and maximum 1% at 1V_rms and 1kHz for Un between 25V and 50V
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Radial Dipped X7R Capacitors (1kV – 5kV)

Radial dipped X7R capacitor series
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique RF Power High Frequency Capacitor Series

MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E