1210

SRT CHS 1210-HT

High Value Thick Film Chip Resistors
  • High temperature, non-magnetic chip resistor
  • Resistance range from 10MΩ to 100GΩ
  • Tolerances from ±1% to ±30%
  • TCR from ±25 ppm/°C to ±2000 ppm/°C
  • Power rating of 0.350W (at +70°C)
  • Temperature range from -55°C up to +300°C

SRT CRA 1210

Trimmable Thick Film Chip Resistors
  • Trimmable thick film chip resistor
  • Resistance range from 1Ω to 10MΩ
  • Tolerances from ±5% to ±30%
  • TCR from ±50 ppm/°C to ±250 ppm/°C
  • Power rating of 0.35W (at +70°C)
  • Temperature range from -55°C up to +155°C

SRT GST 1210

High Value Radial Leaded Resistors
  • Non-magnetic, radial thick film resistor
  • Resistance range from 1MΩ to 100GΩ
  • Tolerances from ±0.5% to ±30%
  • TCR from ±25 ppm/°C to ±2000 ppm/°C
  • Power rating of 0.5W (at +70°C)
  • Temperature range from -55°C up to +150°C

Susumu RGV Series

Metal thin-film high voltage chip resistor
  • Metal thin-film chip resistor (high voltage)
  • High voltage operation: RGV3225 1000V
  • Long term stability with inorganic passivation.
  • Resistance tolerance : ±0.1%
  • TCR : ±25 ppm/℃
  • Thin film structure enabling low noise and anti-sulphur

SRT Microcéramique Chip Capacitors with Negative TC

SRT Microcéramique Chip Capacitors with Negative TC
  • NP0 (C0G) Chip ceramic capacitor with negative TC
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kH (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Frequency Capacitor Series

SRT Microcéramique High Frequency Capacitor
  • MLCC Capacitor for RF and Microwave communication
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 5.10-4 at 1Vrms and 1MHz for values ≤ 1000pF and under 5.10-4 at 1Vrms and 1KHz for values > 1000pF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Temperature NP0 Capacitor Series

SRT Microcéramique High Temperature NP0 Capacitor
  • High Temperature, ultra stable MLCC Capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Temperature X7R Capacitor Series

SRT Microcéramique High Temperature X7R Capacitor
  • High Temperature MLCC Capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage NP0 Capacitor Series (200V-1kV)

SRT Microcéramique High Voltage NP0 Capacitor (200V-1kV)
  • Ultra stable ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage NP0 Capacitor Series (2kV-10kV)

SRT Microcéramique High Voltage NP0 Capacitor (2kV-10kV)
  • Ultra stable ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage X7R Capacitor Series (200V-1kV)

SRT Microcéramique High Voltage X7R Capacitor (200V-1kV)
  • Stable ceramic capacitor
  • High quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage X7R Capacitor Series (2kV-10kV)

SRT Microcéramique High Voltage X7R Capacitor (2kV-10kV)
  • Stable ceramic capacitor
  • High quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Low Voltage BX Capacitor Series (50-100V)

SRT Microcéramique Low Voltage BX Capacitor (50-100V)
  • Stable ceramic capacitor
  • Better voltage behaviour compared to X7R dielectric
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Low Voltage NP0 Capacitor Series (16-100V)

SRT Microcéramique Low Voltage NP0 Capacitor (16-100V)
  • Ultra stable ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Low Voltage X7R Capacitor Series (16-100V)

SRT Microcéramique Low Voltage X7R Capacitor (16-100V)
  • Stable ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Non Magnetic NP0 Capacitor Series

SRT Microcéramique Non Magnetic NP0 Capacitor
  • Non magnetic NP0 (Type 1) MLCC Capacitors
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E

Custom Component Solutions

Working alongside your design team from the earliest stage, we help you select the right part for the application and, where a standard part will not do, develop customised components with our manufacturing partners such as lead length, termination and package size.

Related Components

Manufacturers

Looking for 1210?

The below manufacturers are all of our authorised partners that produce 1210 or related products.

1210