Pressure

Pressure
Show:
Sort By:

Cynergy3 ILLS Submersible Level Transmitter Series

The ILLS series of submersible tank gauging level transmitters from Cynergy3 utilises piezo-resistive silicon sensing technology to achieve better level of control and measurements for small tanks (1m to 10m high), while ensuring excellent stability, repeatability and resolution. The probe is isolated by a stainless steel diaphragm as well as steel housing, designed for continuous submersion in liquids. This level transmitter offers accuracy below 0.5% of the full scale BFSL, with each device being temperature compensated, calibrated and fully traceable.

  • Submersible tank gauging level transmitter
  • Piezo-resistive sensor
  • Stainless steel diaphragm and housing ideal for continuous submersion in water, oils and fuels
  • Accuracy <0.5% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -20°C to 60°C
  • Excellent operational life at over 100x106 cycles
  • Ideal for use in small tanks where conventional mechanical switches are not ideal

The ILLS series of level transmitters is available in several output, pressure range and cable length options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 ILLS level transmitter series include:

  • Static tank level
  • Container or chamber level
  • Vehicle tank level
  • IBC , IBC Tote or Pallet Tank
  • Rainwater harvesting

The below table gives the full specifications for each resistor model available including the Cynergy3 ILLS series:

Cynergy3 ILLS series specifications

£0.00 Ex Tax: £0.00

Cynergy3 IPS Pressure Transducer Series

The IPS series of ceramic industrial pressure transducers from Cynergy3 utilises piezo-resistive ceramic sensing technology to achieve excellent accuracy (<±0.25% of the full scale BFSL) and a microprocessor based amplifier for stability, making it an ideal device for industrial applications. The IPS pressure transducer is available with selection of pressure ratings (between -1 and 400 bar G) and outputs (4-20mA, 0-100mV or 0-5V). Moreover, the sensor features stainless steel housing ensuring excellent media compatibility. Each device comes temperature compensated, calibrated and fully traceable.

  • Industrial pressure transducers
  • Piezo-resistive, thick-film, ceramic sensor
  • Stainless steel housing for excellent media compatibility
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -40°C to 135°C
  • Excellent operational life at over 100x106 cycles
  • Process connection via 1/4" BSP male

The IPS series of pressure transducers is available in several output and pressure range options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IPS pressure transducer series include:

  • Various industrial applications

The below table gives the full specifications for each resistor model available including the Cynergy3 IPS series:

Cynergy3 IPS series specifications

£0.00 Ex Tax: £0.00

Cynergy3 IPSAT Intrinsically Safe Pressure Transducer Series

The IPSAT series of intrinsically safe industrial pressure transducers from Cynergy3 utilises piezo-resistive ceramic sensing technology to achieve excellent accuracy (<±0.25% of the full scale BFSL) and a microprocessor based amplifier for stability, making it an ideal device for industrial applications. The IPSAT pressure transducer is available with selection of pressure ratings (between -1 and 400 bar G) and 4-20mA output. Moreover, the sensor features stainless steel housing ensuring excellent media compatibility. Each device comes temperature compensated, calibrated and fully traceable. The IPSAT series of pressure transducers is fully ATEX and IECEx approved, making is suitable for applications in hazardous areas.

  • Intrinsically safe industrial pressure transducers
  • ATEX and IECEx approved for use in Zone 2 Hazardous Areas (Ex II 1G Ex ia IIC T4 Ga (Ta - see datasheet))
  • Piezo-resistive, thick-film, ceramic sensor
  • Stainless steel housing for excellent media compatibility
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (ambient temperature) of -40°C to 75°C
  • Excellent operational life at over 100x106 cycles
  • Process connection via 1/4" BSPP male (customisable)

The IPSAT series of intrinsically safe pressure transducers is available in several pressure range options, with further customisation available - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IPSAT pressure transducers series include:

  • Various industrial applications
  • Applications in Hazardous Areas

The below table gives the full specifications for each resistor model available including the Cynergy3 IPSAT series:

Cynergy3 IPS series specifications

£0.00 Ex Tax: £0.00

Cynergy3 IWPT Wireless Pressure Transducer Series

The IWPT series of wireless industrial pressure transducers from Cynergy3 utilises piezo-resistive thick film ceramic sensor to offer an excellent cost effective alternative to traditional wired transducers in inaccessible or expensive installation environments. The sensors feature accuracy as low as <±0.25% of the full scale (BFSL), selection of pressure ranges from -1 to +400 bar gauge and up to 750m line-on-site range. The IWPT series' user selectable features include transmission update rates, output (1-5V or 4-20mA) and configuration (single or 5 channel; depending on receiver used). The IWPT series is designed to be paired with one of the IWR family of wireless receivers for simple plug-and-play pressure measurement solution; a swivel adaptor is available to allow easy alignment of the head with the receiver. The sensors are housed within a 316 stainless steel body, making them suitable to use with liquids and gases. Each device comes temperature compensated, calibrated and fully traceable.

  • Industrial wireless pressure transducers
  • Piezo-resistive, thick-film, ceramic sensor
  • 316 Stainless steel housing for excellent media compatibility (liquids and gases)
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -20°C to 135°C
  • Battery life up to 5 years with 10s update rate
  • Process connection via 1/4" BSP male

The IWPT series of pressure transducers is available in several output and pressure range options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IWPT pressure transducer series include:

  • Simple cable replacement installation - dispense with expensive cable runs
  • Environmental monitoring - pumping stations, sewage plants, water treatment etc.
  • Facilities management - boiler rooms, plant hydraulics, plant pneumatics
  • Asset monitoring - tank farms, process plants, HVAC and building management
  • Service contract - temporary installation for servicing and field trials

The below table gives the full specifications for each resistor model available including the Cynergy3 IWPT series:

Cynergy3 IWPT series specifications

£0.00 Ex Tax: £0.00

Cynergy3 IWR-1 Wireless Receiver - 1 channel

The IWR-1 single channel wireless receiver from Cynergy3 is a designed to be paired with IWPT, IWPTU, IWTT and IWTTU series of wireless pressure and temperature sensors. With end-to-end accuracy of 0.25% FS BFSL and up to 750m line-of-sight range (with use of optional 3dBl antenna), the wireless system offers an economical alternative to traditional wired transducer solutions. While offering user-selectable features (choice of output, transmission rate etc.), this received is designed to work "out-of-the-box" as a simple plug-and-play remote measurement solution.

  • Single channel wireless receiver for IWPT/U and IWTT/U series of wireless pressure and temperature transducers
  • Simple plug-and-play installation (configuration software available to download from Technical Library if required)
  • User selectable output: 4-20mA or 1-5V
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -10°C to +50°C
  • Clean contact output for process, low battery or loss of signal alarm function
  • Up to 750m line-of-sight range when used with 3dBl antenna (up to 500m with standard 0dBl antenna)
  • Powered by 12-32Vdc supply

A range of auxilliary parts is available for the IWR-1 receiver, including DIN rail and wall mounting kits, upgraded 3dBl antenna, etc. - please speak to our technical sales team to discuss your requirements.

The below table gives the full specifications for the Cynergy3 IWR-1 wireless receiver:

Cynergy3 IWR-1 specifications

£0.00 Ex Tax: £0.00

Cynergy3 IWR-5 Wireless Receiver - 5 channel

The IWR-5 five channel wireless receiver from Cynergy3 is a designed to be paired with IWPT, IWPTU, IWTT and IWTTU series of wireless pressure and temperature sensors. With end-to-end accuracy of 0.25% FS BFSL and up to 750m line-of-sight range (with use of optional 3dBl antenna), the wireless system offers an economical alternative to traditional wired transducer solutions. The IWR-5 offers user-selectable features (choice of output, transmission rate etc.) and requires minimal setup using the software provided, ensuring a simple solution to multi-channel remote measurement applications.

  • Wireless receiver for IWPT/U and IWTT/U series of wireless pressure and temperature transducers
  • 5 channel
  • Simple installation using the IWR-Set software (download link available in Technical Library)
  • User selectable output: 4-20mA or 1-5V
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -10°C to +50°C
  • Clean contact output for process, low battery or loss of signal alarm function
  • Up to 750m line-of-sight range when used with 3dBl antenna (up to 500m with standard 0dBl antenna)
  • Powered by 12-32Vdc supply

A range of auxilliary parts is available for the IWR-5 receiver, including DIN rail and wall mounting kits, upgraded 3dBl antenna, etc. - please speak to our technical sales team to discuss your requirements.

The below table gives the full specifications for the Cynergy3 IWR-5 wireless receiver:

Cynergy3 IWR-5 specifications

£0.00 Ex Tax: £0.00

Emerson Paine™ 210-60-090 Series

The Paine™ 210-60-090 differential pressure transducer series from Emerson offers measuring pressure ranges from ±500 PSID up to ±5000 PSID all in a small size. The 210-60-090 from Emerson is built with two separate sensing elements to measure the pressure at the input ports. This device has a very low thermal shift of ±0.01% of full scale per °C in the toughest environments and provides a differential output along with a uniquely small design. This transducer series is ideal for measuring differential pressure in many applications, such as actuator position feedback from servo valves to automotive and aviation testing environments.

  • Differential pressure transducer
  • Pressure ranges available from ±500 PSID up to ±5000 PSID
  • Compensated temperature −23°C to +121°C
  • Small, lightweight manifold style mounting for easy installation
  • Accuracy of P1=2mV/V ±10% and P2=P1 ±2% of P1
  • Output of mV/V
  • Operating media of any compatible with 300 series CRES, Buna-N-Rubber, 2024-T351 AL and PH CRES
  • Very low thermal sensitivity shift of ±0.01% of F.S. per °C
  • Temperature compensated design provides highly accurate pressure measurements
  • Shock and vibration resistant design offers highly accurate and reliable pressure monitoring in many operating conditions
  • Durable solution withstands harsh environments for long-lasting performance
  • Custom electrical connection and pressure port adapters are available on request

Potential applications for the Paine™ 210-60-090 series include:

  • Test stands and measurements
  • Robotic hydraulic controls
  • Industrial process systems
  • Positioning systems
  • Valve pressure control

Please see below the pressure table for the Paine™ 210-60-090 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine 210-60-090 Specifications

£0.00 Ex Tax: £0.00

Emerson Paine™ 210-65-010 Series

The Paine™ 210-60-090 differential pressure transducer series from Emerson offers measuring pressure ranges from ±500 PSID up to ±5000 PSID. This transducer comes with two separate sensing elements to measure differential pressure at the input ports. This device is shock and vibration resistant, produces highly accurate measurements in harsh and demanding conditions. The 210-65-010 differential pressure transducer from Emerson is engineered to provide differential measurements in fire-resistant Skydrol® aviation hydraulic fluid applications.

  • Differential pressure transducer
  • Pressure ranges available from ±500 PSID up to ±5000 PSID
  • Compensated temperature −23°C to +121°C
  • Accuracy of P1 = 2.0mV/V (±10%) and P2 = P1 (±2% of P1)
  • Output of mV/V
  • Small, lightweight manifold style mounting for easy installation
  • Skydrol® aviation hydraulic fluid compatible
  • Very low Thermal sensitivity shift of ±0.01% of F.S. per °C
  • Shock and vibration resistant design offers highly accurate and reliable pressure monitoring in many operating conditions
  • Compact design for an easy-to-use differential measurement solution
  • Durable solution withstands harsh environments for long-lasting performance
  • Custom electrical connection and pressure port adapters are available on request

Potential applications for the Paine™ 210-60-090 series include:

  • Aviation and automotive test stands
  • Aerospace and aviation transportation motion simulators
  • Transportation steering control systems
  • Military weapon positioning systems
  • Actuators
  • Positioning systems

Please see below the pressure table for the Paine™ 210-65-010 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine 210-65-010 Specifications

£0.00 Ex Tax: £0.00

Emerson Paine™ 211-37-520 Series

Emerson's Paine™ 211-37-520 high pressure and temperature transducer is a high pressure/high temperature (HP/HT) combination transducer ready to perform in extreme conditions. This transducer from Emerson is engineered to withstand application temperatures of up to 204°C (400°F) and offer a pressure measurements of up to 30,000 PSIA. With a small form factor and sealed, all-welded construction, this device also has the ability to perform in harsh environments, making it an ideal solution for down-hole, subsea and industrial design.

  • High pressure and temperature transducer
  • Pressure range from 0-5,000 PSIA up to 0-30,000 PSIA
  • Operating temperature −40°C to +204°C
  • Compensated temperature +23°C to +176°C
  • Process media is compatible with alloy UNS N07718 solution annealed and aged to a minimum hardness of 40HRC
  • External case pressure up to 20,000 PSI
  • Accuracy of 0.75% full scale
  • Output of mV/V
  • Full scale sensitivity of 2.6mV/V ±0.2%
  • Non-linearity and hysteresis combined of ±0.15% full scale max (BSLM)
  • Pressure fitting per MS33656-E3
  • Offered in a small ½ inch diameter form factor
  • All-welded, sealed construction provides durability, resilience and stability in harsh and corrosive environments
  • Customisation transducer options available for fit-for-use designs

Many new exciting industries are now using the Emerson's Paine™ 211-37-520 series because of its rugged construction, accuracy, stability, and long term repeatability.

Potential applications for the Paine™ 211-37-520 series include:

  • Wireline and rotary steering tools
  • Hydraulic flow pressure and temperature monitoring
  • Oil and gas exploration and production
  • MWD, PWD and LWD tools

Please see below the pressure table for the Paine™ 211-37-520 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine™ 211-37-520 Specifications

£0.00 Ex Tax: £0.00

Emerson Paine™ 211-50-070 Series

Emerson's Paine™ 211-50-070 high pressure and temperature transducer series is a rugged high pressure/high temperature (HP/HT) combination transducer. This compact transducer from Emerson is engineered with all-welded construction to ensure accuracy, stability and repeatability in high shock and vibration environments. Emerson's Paine™ 211-50-070 is designed for application temperatures that reach up to 260°C and with a pressure range of up to 30,000 PSIA, this transducer is an excellent solution for offshore, down-hole, power, and industrial applications

  • High pressure and temperature transducer
  • Pressure ranges available from 0 - 5,000 PSIA up to 0 - 30,000 PSIA
  • Operating temperature +23°C to +260°C
  • Process media is compatible with alloy UNS N07718 solution annealed and aged to a minimum hardness of 40HRC and Inconel 718
  • External case pressure up to 20,000 PSI.
  • Accuracy of ±0.15% full scale
  • Output of mV/V
  • Full scale sensitivity of 2.6mV/V ±0.2%
  • Offered in a small ½ inch diameter form factor
  • All-welded, sealed construction provides durability, resilience and stability in harsh and corrosive environments
  • Customisation transducer options available for fit-for-use designs

Potential applications for the Paine™ 211-50-070 series include:

  • Oil and gas exploration and production
  • MWD,PWD and LWD tools
  • Wellhead and pump station monitoring
  • Geothermal and power generation
  • OEM and end-user applications

Please see the datasheet in the Technical Library tab for the Paine™ 211-50-070 series, which includes details on standard products available as well as proof and burst pressure ratings.

£0.00 Ex Tax: £0.00

Emerson Paine™ 212-30-010 series

Emerson's Paine™ 212-30-010 miniature satellite and space pressure transmitter series is designed with Class 'S', QML-V / ELDRS free electronics to meet EEE INST-002/ MSFCSTD- 3012 Level 1 standards. This transmitter series from Emerson offers a pressure range of 0 - 500 PSIA and provides reliable measurement in mission critical applications. This high-performance transmitter features low mass of 75 grams, radiation hardening to 100KRad (Si) total dose and accuracy of ±1.5% full scale. Applications include fuel tank pressure and thrust-er propellant pressure.

  • Miniature satellite and space pressure transmitter
  • Pressure range of 0 - 500 PSIA
  • All welded stainless steel construction
  • Input voltage options of ±12 - 15VDC (power rating of 0.35W) or ±24 - 32VDC (power rating of 0.8W) available
  • Operating temperature range of −40°C to +60°C (part 212-30-010-01) or −40°C to +50°C (part 212-30-010-01)
  • Designed with Class 'S', QML-V / ELDRS free electronics to meet EEE INST-002/ MSFCSTD- 3012 Level 1 standards
  • Performs in orbital environments with radiation hardening/rating to 100KRad (Si) total dose
  • Output voltage of 0.1 to 5.1VDC
  • Accuracy of ±1.5% of the full scale over the calibrated temperature range
  • Features immunity to Single Event Latch up (SEL)
  • Customisation options available for fit-for-use designs
  • Process media any compatible with 15-5 PH CRES & 321 CRES

The 212-30-010 series offers an all welded stainless steel construction that provides high measurement performance, accuracy and reliability in mission critical applications.

Potential applications for the Paine™ 212-30-010 series include:

  • Fuel tank pressure monitoring
  • Thrust pressure monitoring
  • Pressure regulator systems
  • Oxygen pressure monitoring
  • Space probe servo valve controls
  • ROV maneuvering controls

Please see the pressure table below for the Paine™ 212-30-010 series, which includes details on standard products available as well as proof and burst pressure ratings:

Emerson Paine™ 212-30-010 series specifications

£0.00 Ex Tax: £0.00

Emerson Paine™ 212-35-070 series

Emerson's Paine™ 212-35-070 miniature satellite and space pressure transmitter series is designed with Class 'S', QML-V / ELDRS free electronics to meet EEE INST-002/ MSFCSTD- 3012 Level 1 standards. This transmitter series from Emerson offers a pressure range of 0 - 5,000 PSIA and provides reliable measurement in mission critical applications. This high-performance transmitter features low mass of 75 grams, radiation hardening to 100KRad (Si) total dose and accuracy of ±1.5% full scale. Applications include fuel tank pressure and thrust-er propellant pressure.

  • Miniature satellite and space pressure transmitter
  • Pressure range of 0 - 5,000 PSIA
  • All welded stainless steel construction
  • Input voltage options of ±12 - 15VDC (power rating of 0.35W) or ±24 - 32VDC (power rating of 0.8W) available
  • Operating temperature range of −40°C to +60°C (part 212-35-070-01) or −40°C to +50°C (part 212-35-070-02)
  • Designed with Class 'S', QML-V / ELDRS free electronics to meet EEE INST-002/ MSFCSTD- 3012 Level 1 standards
  • Performs in orbital environments with radiation hardening/rating to 100KRad (Si) total dose
  • Output voltage of 0.1 to 5.1VDC
  • Accuracy of ±1.5% of the full scale over the calibrated temperature range
  • Features immunity to Single Event Latch up (SEL)
  • Customisation transmitter options available for fit-for-use designs
  • Process media any compatible with 15-5 PH CRES & 321 CRES

The 212-35-070 series offers an all welded stainless steel construction that provides high measurement performance, accuracy and reliability in mission critical applications.

Potential applications for the Paine™ 212-35-070 series include:

  • Fuel tank pressure monitoring
  • Thrust pressure monitoring
  • Pressure regulator systems
  • Oxygen pressure monitoring
  • Space probe servo valve controls
  • ROV maneuvering controls

Please see the pressure table below for the Paine™ 212-35-070 series, which includes details on standard products available as well as proof and burst pressure ratings:

Emerson Paine™ 212-35-070 series specifications

£0.00 Ex Tax: £0.00

Emerson Paine™ 212-40-020 Series

The Paine™ 212-40-020 high pressure and temperature transducer is a miniature VDC, high pressure / high temperature (HP/HT) combination transducer from Emerson and has been engineered specifically for extreme oil field applications. The Emerson Paine™ transducer offers pressure ranges up to 30,000 PSIA and temperatures of up to +210°C. The 212-40-020 series incorporates an innovative design with Silicon on Insulator (SOI) technology for precise and continuous high temperature measurement. As a compact transducer, this device provides accuracy and stability in a miniature, ½ inch diameter small form factor.

  • High pressure and temperature transducer
  • Pressure ranges available from 0 - 5,000 PSIA up to 0 - 30,000 PSIA
  • Operating temperature −40°C to +210°C
  • Process media is any compatible with alloy UNS N07718 solution annealed and age hardened to Rockwell C 40 maximum Inconel® 718
  • Accuracy of 0.1% full scale
  • Output of VDC
  • Full scale (F.S.) sensitivity of 2.8mV/V nominal
  • Engineered with SOI technology for precise and continuous high temperature measurement
  • Offered in a small ½ inch diameter form factor
  • Compact and resilient design withstands harsh environments
  • Custom designs and pressure ranges available on request

The Emerson Paine™ 212-40-020 transducer series performs in high pressure and temperature ranges (up to 30000 PSIA or 2069 bar) for a durable solution.

Potential applications for the Paine™ 212-40-020 series include:

  • Downhole tools (MWD, LWD, Wireline and more)
  • Offshore energy exploration
  • Industrial control systems and automation
  • Artificial lift and sub sea risers
  • Engine sensing and controls

Please see below the pressure table for the Paine™ 212-40-020 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine 212-40-020 Specifications

£0.00 Ex Tax: £0.00

Emerson Paine™ 220-30-020 Series

As a fully submersible device, the Paine™ 220-30-020 subsea pressure and temperature transmitter from Emerson is a reliable solution for pressure and temperature measurement in remote subsea systems. Offering pressure ranges of up to 15,000 PSIA and temperature measurements between -4°C up to +60°C, Emerson's Paine™ transmitter also features digital measurement accuracy and utilises the industry-standard CANopen® digital subsea instrumentation interface. With an all-welded design, this transmitter offers long-term subsea operation and meets the requirements of API 17F / ISO 13628-6 and CiA® 443 (SIIS level-2 device).

  • Subsea pressure and temperature transmitter
  • Pressure ranges available up to 0 - 15,000 PSIA (0 to 1034 BAR)
  • Operating temperature −4°C to +60°C
  • Resolution of 16 bits minimum (0.08 PSI for 5,000 PSI full scale)
  • Intelligent CANopen® digital subsea instrumentation interface delivers high resolution and reliability
  • Accuracy of 0.1%
  • Output CANopen® fault tolerant
  • Features micro subconn® MCBH4F subsea connector and all welded construction
  • Meets API 17F / ISO 13628-6 and CIA 443 (SIIS Level 2 device) requirements
  • Engineered with ⅜ inch female autoclave port fitting to meet industry-standard application requirements
  • Transmitter designed for consistent performance and digital measurement accuracy
  • Customisation options available for fit-for-use designs

Potential applications for the Paine™ 220-30-020 series include:

  • Subsea production & controls systems
  • Remote / extreme pressure monitoring
  • Corrosive environment pressure monitoring
  • Submersible subsea applications
  • ROV's & AUV's
  • Subsea valves and manifolds

Please see the below pressure table for the Paine™ 220-30-020 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine 220-30-020 Specifications

£0.00 Ex Tax: £0.00

Emerson Paine™ 310-38-0050 Series

Providing critical, real-time data, the Paine™ 310-38-0050 high pressure transducer series from Emerson offers ultra-miniature, high precision measurement devices. This compact, yet durable, transducer series is specifically designed for harsh environments, including applications with extreme down-hole high cycle with a high pressure range of 0 - 25000 PSIA and high temperatures of up to +218°C. Emerson's Paine™ 310-38-0050 transducer is engineered for measurement accuracy and the enhanced real-time data of these sensors allows for improved production efficiency.

  • Ultra miniature pressure transducer
  • Pressure ranges available from 0 - 5,000 PSIA up to 0 - 25,000 PSIA
  • Operating temperature −40°C to +218°C
  • Drift less than ±0.05% of full scale over 60 days
  • A total error band of less than ±0.01%
  • Accuracy of 0.025% full scale
  • Output of mV/V
  • Process media is compatible with alloy UNS NO7718 solution annealed and aged to a minimum hardness of 40HRC Inconel® 718
  • Ultra-Miniature 0.37 in (0.93 cm) diameter design provides a compact and narrow form factor to meet installation requirements
  • Engineered to withstand the harsh environments of high cycle, high pressure and high temperature applications
  • Precise, real-time data optimizes production parameters
  • Customisation options available for fit-for-use designs

The Paine™ 310-38-0050 additional features:-

  • Downhole tools (MWD, LWD, wireline and more)
  • Artificial lift and subsea risers
  • Subsea hydraulic controls

Please see the below pressure table for the Paine™ 310-38-0050 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine 310-38-0050 Specifications

£0.00 Ex Tax: £0.00