+44 (0) 1342 330 470

Supporting Manufacturer Information

SRT Microcéramique Product Catalogue

1kV series

SRT Microcéramique SMD High Voltage Class I Capacitors

High Voltage Class I SMD Capacitor
Capacitance from 0.1pF to 1µF
TCR of ± 30ppm with 0Vdc applied
Voltages from 1KV to 15KV
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

SRT Microcéramique SMD High Voltage Class II Capacitors

High Voltage Class II SMD Capacitor
Capacitance from 6.8pF to 10µF
TCR of ± 15% with 0Vdc applied
Voltages from 1kV to 15kV
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

SRT Microcéramique SMD High Voltage N2T Capacitors

High Voltage N2T SMD Capacitor
No piezoelectric efect, high current pulse discharge
Capacitance from 1pF to 3.3µF
Voltages from 1kV to 15kV
Operating temperatures of -55°C to +125°C
Available in stack or radial

SRT Microcéramique Stacked Capacitor High Voltage 1kV

High Voltage Stacked Capacitor
High Voltage Capability (1kV to 10kV)
Stacked MLCC Construction for High Capacitance
Available in NP0, N2T, and X7R dielectrics
Low ESR/ESL for High-Frequency Efficiency
100% tested at elevated temperatures (125°C) and voltages for 48 hours

Caddock MG Standard Range

Cylindrical high voltage axial leaded resistor
Maximum operating voltage from 600V up to 30kV *
Resistance values from 200Ω up to 2GΩ *
Tolerances of ±0.1%, ±0.25%, ±0.5% and ±1%
TCR as tight as ±80 ppm/°C from -15°C to +105°C
Maximum power rating from 0.5W up to 15W *
Operating Temperature Range of -55°C to +225°C

_{* Dependant on selected resistor model}

SRT Microcéramique High Power Low Frequency Capacitor Series

MLCC high power, low capacitance variation with voltage capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage NP0 Capacitor Series (200V-1kV)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage X7R Capacitor Series (200V-1kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Non Magnetic NP0 Capacitor Series

Non magnetic NP0 (Type 1) MLCC Capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Non Magnetic X7R Capacitor Series

Non magnetic X7R (Type 2) MLCC Capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor maximum of 2.5% at 1V_rms and 1kHz for Un between 16V and 25V and maximum 1% at 1V_rms and 1kHz for Un between 25V and 50V
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Radial Dipped X7R Capacitors (1kV – 5kV)

Radial dipped X7R capacitor series
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Radial Moulded Capacitors (500V – 2kV)

Radial moulded capacitor series for military applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1Vrms and 1kHz
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Climatic Category 55/125/56

SRT Microcéramique RF Power High Frequency Capacitor Series

MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique X7R Capacitor Stack Series

X7R capacitor stacks, ideal for input/output filtering in SMPS applications
Highest quality and reliability, suitable for safety-critical industries
Maximum dissipation factor of 2.5% at 1V_rms, 1kHz, 25°C
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less
Dielectric withstanding voltage of 2.5Un for 5s with 50mA maximum charging current

SRT Microcéramique SMD High Voltage Class I Capacitors

High Voltage Class I SMD Capacitor
Capacitance from 0.1pF to 1µF
TCR of ± 30ppm with 0Vdc applied
Voltages from 1KV to 15KV
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

SRT Microcéramique SMD High Voltage Class II Capacitors

High Voltage Class II SMD Capacitor
Capacitance from 6.8pF to 10µF
TCR of ± 15% with 0Vdc applied
Voltages from 1kV to 15kV
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

SRT Microcéramique SMD High Voltage N2T Capacitors

High Voltage N2T SMD Capacitor
No piezoelectric efect, high current pulse discharge
Capacitance from 1pF to 3.3µF
Voltages from 1kV to 15kV
Operating temperatures of -55°C to +125°C
Available in stack or radial

SRT Microcéramique Stacked Capacitor High Voltage 1kV

High Voltage Stacked Capacitor
High Voltage Capability (1kV to 10kV)
Stacked MLCC Construction for High Capacitance
Available in NP0, N2T, and X7R dielectrics
Low ESR/ESL for High-Frequency Efficiency
100% tested at elevated temperatures (125°C) and voltages for 48 hours

Caddock MG Standard Range

Cylindrical high voltage axial leaded resistor
Maximum operating voltage from 600V up to 30kV *
Resistance values from 200Ω up to 2GΩ *
Tolerances of ±0.1%, ±0.25%, ±0.5% and ±1%
TCR as tight as ±80 ppm/°C from -15°C to +105°C
Maximum power rating from 0.5W up to 15W *
Operating Temperature Range of -55°C to +225°C

_{* Dependant on selected resistor model}

SRT Microcéramique High Power Low Frequency Capacitor Series

MLCC high power, low capacitance variation with voltage capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage NP0 Capacitor Series (200V-1kV)

Ultra stable ceramic capacitor
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique High Voltage X7R Capacitor Series (200V-1kV)

Stable ceramic capacitor
High quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Non Magnetic NP0 Capacitor Series

Non magnetic NP0 (Type 1) MLCC Capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 10.10^-4 at 1V_rms and 1kHz (or 1MHz)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Non Magnetic X7R Capacitor Series

Non magnetic X7R (Type 2) MLCC Capacitors
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor maximum of 2.5% at 1V_rms and 1kHz for Un between 16V and 25V and maximum 1% at 1V_rms and 1kHz for Un between 25V and 50V
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Radial Dipped X7R Capacitors (1kV – 5kV)

Radial dipped X7R capacitor series
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique Radial Moulded Capacitors (500V – 2kV)

Radial moulded capacitor series for military applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor up to 0.025 at 1Vrms and 1kHz
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Climatic Category 55/125/56

SRT Microcéramique RF Power High Frequency Capacitor Series

MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique X7R Capacitor Stack Series

X7R capacitor stacks, ideal for input/output filtering in SMPS applications
Highest quality and reliability, suitable for safety-critical industries
Maximum dissipation factor of 2.5% at 1V_rms, 1kHz, 25°C
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less
Dielectric withstanding voltage of 2.5Un for 5s with 50mA maximum charging current

Select at least 2 products
to compare