Please be advised that due to the ongoing supply issues with raw materials affecting the global electronics industry, as well as an increase in orders received by our manufacturing partners, a large number of products are facing increased lead times in recent months. For the latest lead time and stock availability, please contact one of our engineers who will be happy to discuss lead times further and the potential for alternative parts.
50V series
Supporting Manufacturer Information
- Exxelia Ohmcraft's Case Size Application Note
- Exxelia Ohmcraft's Glossary Application Note
- Exxelia Ohmcraft's High-Frequency Application Note
- Exxelia Ohmcraft's High-Value Resistor White Paper
- Exxelia Ohmcraft's High-Voltage Resistor Application Note
- Exxelia Ohmcraft's High-Voltage White Paper
- Exxelia Ohmcraft's Lead Free Policy Application Note
- Exxelia Ohmcraft's Low Current Noise White Paper
- Exxelia Ohmcraft's Micropenning Application Note
- Exxelia Ohmcraft's Resistor Pulse White Paper
- Exxelia Ohmcraft's Solder Reflow Application Note
- Exxelia Ohmcraft's Specifying Resistors Application Note
- Exxelia Ohmcraft's TCR Tracking White Paper
- Exxelia Ohmcraft's Tight Ratio Tolerance White Paper
- Exxelia Ohmcraft's Voltage Ratio And Coefficiant Application Note
- Bondable SMD Resistors
- Resistance range from 10kΩ to 10GΩ
- Tolerances from ±1% to ±20%
- TCR from ±50 ppm/°C to >±200 ppm/°C
- Power rating of 0.04W
- Voltage rating of 50V
- Temperature range from -55°C to +150°C
- Bondable SMD Resistors
- Resistance range from 10kΩ to 10GΩ
- Tolerances from ±1% to ±20%
- TCR from ±50 ppm/°C to >±200 ppm/°C
- Power rating of 0.05W
- Voltage rating of 50V
- Temperature range from -55°C to +150°C
- High Ohmic SMD Resistors
- Resistance range from 10kΩ to 1GΩ
- Tolerances from ±1% to ±20%
- TCR of ±50 ppm/°C, ±100 ppm/°C or ±200 ppm/°C
- Power rating of 0.04W
- Voltage rating of 150V
- Temperature range from -55°C to +150°C
- NP0 (C0G) Chip ceramic capacitor with negative TC
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kH (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- MLCC Capacitor for RF and Microwave communication
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 5.10-4 at 1Vrms and 1MHz for values ≤ 1000pF and under 5.10-4 at 1Vrms and 1KHz for values > 1000pF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- High Temperature, ultra stable MLCC Capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- High Temperature MLCC Capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Low inductance capacitors for high energy transfer
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 2.5% at 1KHz
- Insulation resistance of 20°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less
- Stable ceramic capacitor
- Better voltage behaviour compared to X7R dielectric
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Ultra stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Non magnetic NP0 (Type 1) MLCC Capacitors
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Non magnetic X7R (Type 2) MLCC Capacitors
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor maximum of 2.5% at 1Vrms and 1kHz for Un between 16V and 25V and maximum 1% at 1Vrms and 1kHz for Un between 25V and 50V
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Ultra stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical medical applications
- Dissipation factor maximum of 0.1% at 1Vrms and 1kHz (values under 1nF measured at 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric withstanding voltage of 250% of rated voltage for 5s + 1s, 50mA maximum
- Radial dipped NP0 capacitor series
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Radial dipped X7R capacitor series
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E