Industrial Pressure Sensors

Industrial Pressure Sensors
Show:
Sort By:

Core Sensors CS10 series

The CS10 industrial pressure transducer series from Core Sensors is designed for demanding applications by offering a robust package and a variety of customisations to suit various requirements. Available with pressure ranges from vacuum to 40,000 PSI and utilising Mems silicon strain gauges mounted to a stainless steel or nickel alloy sensing element. The CS10 from Core offers ASIC electronics with analog voltage or 4-20mA loop powered output signals, with various process connections available in 17-4ph, 316L or nickel alloy including Hastelloy C276 and Inconel 718. This sensor series has an operating temperature range of -40°C to +85°C with an acuracy of ≤ ±0.25% BFSL.

  • Industrial pressure transducer
  • Pressure ranges available from vacuum up to 40,000 PSI
  • One piece design for pressure over 30 PSI and media isolated for pressure 30 PSI and below
  • Operating temperature −40°C to +85°C
  • Accuracy of ≤ ±0.25% BFSL
  • Burst pressure of 5x or 60,000 PSI whichever is less
  • Stability (1 year) of ≤ ±0.25% of FS
  • Pressure cycles of 100 million
  • Electrical output options of 4-20mA,1-5V, 1-6V, 0-5V (3 wire), 0-10V (3 wire), 0.5-4.5V ratiometric or mV/V, millivolt
  • Reverse polarity protection
  • Oxygen cleaning available
  • Optional integral snubber
  • Various process connections available in 17-4ph, 316L or nickel alloy including Hastelloy C276 and Inconel 718
  • Semi custom and custom designs available

Potential applications for the Core CS10 series include:

  • Water pressure monitoring
  • Hydraulic/pneumatic equipment
  • HVAC/R controls
  • Building controls
  • Hydrogen (316L SS only)
  • Low pressure external tank level monitoring

Please see the below performance and thermal tables for the Core CS10 series:

Core CS10 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability

£0.00 Ex Tax: £0.00

Core Sensors CS11 series

The CS11 compact media isolated pressure sensor series from Core Sensors is designed with a silicone sensing element which is isolated by a fluid filled cavity. Available with pressure ranges from 0-2 up to 2,000 PSI and with an accuracy of ≤ ±0.2% BFSL. The CS11 from Core offers a 10 mV/V output signal and either 316L SS or Hastelloy C276 wetted material for compatibility in a variety of medias and an operating temperature range of -40°C to +120°C. The CS11 sensor is an economical choice in applications with minimal installation space.

  • Compact media isolated pressure sensor
  • Pressure ranges available from 0-2 up to 2,000 PSI
  • Operating temperature −40°C to +120°C
  • Acuracy of ≤ ±0.2% BFSL
  • Burst pressure of 5x or 4,000 PSI whichever is less
  • Stability (1 year) of ≤ ±0.2% of FS
  • Pressure cycles of 10 million
  • Electrical output of 10mV/V
  • Compact design
  • Flush diaphragms available
  • Various process connections available in 316L SS or Hastelloy C276 wetted material for compatibility
  • Semi custom and custom designs available

Potential applications for the Core CS11 series include:

  • Water pressure monitoring
  • Pressure measurement in confined areas
  • Low pressure monitoring
  • General industrial equipment
  • Pressure control panels

Please see the below performance and thermal tables for the Core CS11 series:

Core CS11 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability

£0.00 Ex Tax: £0.00

Core Sensors CS50 series

The CS50 non-incendive pressure transducer series from Core Sensors is a high strength sensor designed for use in hazardous areas with various CSA and ANS/UL approvals. Available with pressure ranges from 50 PSI to 30,000 PSI with an accuracy of ≤ ±0.25% BFSL. The CS50 from Core is all welded stainless steel construction with a selection of electrical outputs including 4-20mA, 1-5V, 1-6V, 0.5-.ratiometric or 0.5-2.5V non-ratiometric. A choice of process connections and wetted materials are also available with an operating temperature range of -40°C to +80°C.

  • Non-incendive pressure transducer
  • Pressure ranges available from 50 PSI to 30,000 PSI
  • Approvals CSA Class I, Division2, Groups A,B,C,D T4. ANSI/UL 122701 single seal. ABS (American bureau of shipping)
  • Operating temperature −40°C to +80°C
  • Accuracy of ≤ ±0.25% BFSL
  • Burst pressure of 5x or 60,000 PSI whichever is less
  • Stability (1 year) of ≤ ±0.25% of FS
  • Pressure cycles of 100 million
  • Electrical output options of 4-20mA,1-5V, 1-6V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
  • Reverse polarity protection and EMI protection
  • One piece design
  • Various wetted materials available in 316L SS, 17-4PH, Hastelloy C276 (special order item) and Inconel 718 (special order item)
  • Please contact us for custom designs

Potential applications for the Core CS50 series include:

  • Natural gas compression
  • Oil exploration
  • Hydrogen compression / storage
  • Process Control
  • Test Stands

Please see the below performance and thermal tables for the Core CS50 series:

Core CS50 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability

£0.00 Ex Tax: £0.00

Core Sensors CS51 series

The CS51 non-incendive low pressure transducer series from Core Sensors is a high strength sensor designed for use in hazardous areas with various CSA approvals. Available with pressure ranges from 20 PSI to 50 PSI with an accuracy of ≤ ±0.25% BFSL. The CS50 from Core is all welded stainless steel construction with a selection of electrical outputs including 4-20mA, 1-5V, 1-6V, 0.5-.ratiometric or 0.5-2.5V non-ratiometric. A choice of process connections and wetted materials are also available with an operating temperature range of -40°C to +80°C.

  • Non-incendive low pressure transducer
  • Pressure ranges available from 2 PSI to 50 PSI
  • Approvals CSA Class I, Division2, Groups A,B,C,D and T4
  • Operating temperature −40°C to +80°C
  • Accuracy of ≤ ±0.25% BFSL
  • Burst pressure of 5x or 245 PSI whichever is less
  • Stability (1 year) of ≤ ±0.25% of FS
  • Bi-directional pressure ranges available
  • Electrical output options of 4-20mA,1-5V, 1-6V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
  • Reverse polarity protection and EMI protection
  • One piece design
  • Various wetted materials available in 316L SS and  Hastelloy C276 (special order item)
  • Please contact us for custom designs

Potential applications for the Core CS51 series include:

  • Natural gas compression
  • Oil exploration
  • External fuel tank level measurement
  • Process Control
  • Test Stands

Please see the below performance and thermal tables for the Core CS51 series:

Core CS51 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability

£0.00 Ex Tax: £0.00

Core Sensors CS80 series

The CS80 intrinsically safe pressure transducer series from Core Sensors is designed for use in intrinsically safe areas, with CSA, ANSI/UL and ABS approvals. Available with pressure ranges from 50 PSI up to 30,000 PSI with an all welded stainless steel construction and customisable configurations. The CS80 from Core offers a choice of electrical outputs 4-20mA, 1.5V, 1.6V, 10mV/V, 0.5 - 4.5V ratiometric and 0.5V - 2.5V non-ratiometric, various wetted materials including 17-4ph, 316L SS, Hastelloy C276 and Inconel 718. This sensor series has an operating temperature range of -40°C to +85°C with an acuracy of ≤ ±0.25% BFSL.

  • Intrinsically safe pressure transducer
  • Pressure ranges available from 50 PSI up to 30,000 PSI
  • Available pressure references gauge, vacuum (gauge), vacuum (sealed gauge) or sealed gauges
  • Operating temperature −40°C to +85°C
  • Accuracy of ≤ ±0.25% BFSL
  • Burst pressure of 5x or 60,000 PSI whichever is less
  • Stability (1 year) of ≤ ±0.25% of FS
  • Pressure cycles of 100 million
  • Electrical output options of 4-20mA, 1-5V, 1-6V, 10mV/V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
  • Reverse polarity and EMI protection
  • Various wetted materials available in 17-4ph, 316L SS, Hastelloy C276 (special order item) and Inconel 718 (special order item)
  • Semi custom and custom designs available

Approvals for the Core CS80 series include:

  • CSA Class I, division 1, groups C, D T4 (groups A & B available with millivolt output only)
  • Class I, zone 0 AEx ia IIB T4 Ga (IIC available with millivolt output only)
  • ANSI/UL 122701 single seal
  • ABS (American bureau of shipping)

Potential applications for the Core CS80 series include:

  • Natural gas compression
  • Oil exploration
  • Hydrogen compression / storage
  • Control panels
  • Low pressure external tank level monitoring

Please see the below performance and thermal tables for the Core CS80 series:

Core CS80 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability

£0.00 Ex Tax: £0.00

Core Sensors CS81 series

The CS81 intrinsically safe low pressure transducer series from Core Sensors is designed for use in low pressure applications in intrinsically safe areas, with CSA and ABS approvals. Available with pressure ranges from 2 PSI up to 50 PSI with an all welded stainless steel construction and customisable configurations. The CS80 from Core offers a choice of electrical outputs 4-20mA, 1.5V, 1.6V, 10mV/V, 0.5 - 4.5V ratiometric and 0.5V - 2.5V non-ratiometric, various wetted materials including  316L SS and Hastelloy C276. This sensor series has an operating temperature range of -40°C to +85°C with an acuracy of ≤ ±0.25% BFSL.

  • Intrinsically safe low pressure transducer
  • Pressure ranges available from 2 PSI up to 50 PSI
  • Available pressure references gauge, vacuum (gauge), absolute or bi-directional (gauge)
  • Operating temperature −40°C to +85°C
  • Accuracy of ≤ ±0.25% BFSL
  • Burst pressure of 5x or 245 PSI whichever is less
  • Stability (1 year) of ≤ ±0.25% of FS
  • Pressure cycles of 100 million
  • Electrical output options of 4-20mA, 1-5V, 1-6V, 10mV/V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
  • Reverse polarity and EMI protection
  • Various wetted materials available in 316L SS or Hastelloy C276 (special order item)
  • Semi custom and custom designs available

Approvals for the Core CS81 series include:

  • CSA ClassI, division 1, groups C,D T4 (groups A & B available with millivolt output only)
  • Class I, zone 0 AEx ia IIB T4 Ga (IIC available with millivolt output only)
  • ABS (American bureau of shipping)

Potential applications for the Core CS81 series include:

  • Natural gas compression
  • Vapour recovery
  • External fuel tank level monitoring
  • Process control

Please see the below performance and thermal tables for the Core CS81 series:

Core CS81 Specifications

* Accuracy includes non-linearity, hysteresis and non-repeatability

£0.00 Ex Tax: £0.00

Cynergy3 IPS Series

The IPS series of ceramic industrial pressure transducers from Cynergy3 utilises piezo-resistive ceramic sensing technology to achieve excellent accuracy (<±0.25% of the full scale BFSL) and a microprocessor based amplifier for stability, making it an ideal device for industrial applications. The IPS pressure transducer is available with selection of pressure ratings (between -1 and 400 bar G) and outputs (4-20mA, 0-100mV or 0-5V). Moreover, the sensor features stainless steel housing ensuring excellent media compatibility. Each device comes temperature compensated, calibrated and fully traceable.

  • Industrial pressure transducers
  • Piezo-resistive, thick-film, ceramic sensor
  • Stainless steel housing for excellent media compatibility
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -40°C to 135°C
  • Excellent operational life at over 100x106 cycles
  • Process connection via 1/4" BSP male

The IPS series of pressure transducers is available in several output and pressure range options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IPS pressure transducer series include:

  • Various industrial applications

The below table gives the full specifications for each resistor model available including the Cynergy3 IPS series:

Cynergy3 IPS series specifications

£0.00 Ex Tax: £0.00

Cynergy3 IPSAT Series

The IPSAT series of intrinsically safe industrial pressure transducers from Cynergy3 utilises piezo-resistive ceramic sensing technology to achieve excellent accuracy (<±0.25% of the full scale BFSL) and a microprocessor based amplifier for stability, making it an ideal device for industrial applications. The IPSAT pressure transducer is available with selection of pressure ratings (between -1 and 400 bar G) and 4-20mA output. Moreover, the sensor features stainless steel housing ensuring excellent media compatibility. Each device comes temperature compensated, calibrated and fully traceable. The IPSAT series of pressure transducers is fully ATEX and IECEx approved, making is suitable for applications in hazardous areas.

  • Intrinsically safe industrial pressure transducers
  • ATEX and IECEx approved for use in Zone 2 Hazardous Areas (Ex II 1G Ex ia IIC T4 Ga (Ta - see datasheet))
  • Piezo-resistive, thick-film, ceramic sensor
  • Stainless steel housing for excellent media compatibility
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (ambient temperature) of -40°C to 75°C
  • Excellent operational life at over 100x106 cycles
  • Process connection via 1/4" BSPP male (customisable)

The IPSAT series of intrinsically safe pressure transducers is available in several pressure range options, with further customisation available - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IPSAT pressure transducers series include:

  • Various industrial applications
  • Applications in Hazardous Areas

The below table gives the full specifications for each resistor model available including the Cynergy3 IPSAT series:

Cynergy3 IPS series specifications

£0.00 Ex Tax: £0.00

Cynergy3 IWPT Series

The IWPT series of wireless industrial pressure transducers from Cynergy3 utilises piezo-resistive thick film ceramic sensor to offer an excellent cost effective alternative to traditional wired transducers in inaccessible or expensive installation environments. The sensors feature accuracy as low as <±0.25% of the full scale (BFSL), selection of pressure ranges from -1 to +400 bar gauge and up to 750m line-of-sight range. The IWPT series' user selectable features include transmission update rates, output (1-5V or 4-20mA) and configuration (single or 5 channel; depending on receiver used). The IWPT series is designed to be paired with one of the IWR family of wireless receivers for simple plug-and-play pressure measurement solution; a swivel adaptor is available to allow easy alignment of the head with the receiver. The sensors are housed within a 316 stainless steel body, making them suitable to use with liquids and gases. Each device comes temperature compensated, calibrated and fully traceable.

  • Industrial wireless pressure transducers
  • Piezo-resistive, thick-film, ceramic sensor
  • 316 Stainless steel housing for excellent media compatibility (liquids and gases)
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -20°C to 135°C
  • Battery life up to 5 years with 10s update rate
  • Process connection via 1/4" BSP male

The IWPT series of pressure transducers is available in several output and pressure range options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IWPT pressure transducer series include:

  • Simple cable replacement installation - dispense with expensive cable runs
  • Environmental monitoring - pumping stations, sewage plants, water treatment etc.
  • Facilities management - boiler rooms, plant hydraulics, plant pneumatics
  • Asset monitoring - tank farms, process plants, HVAC and building management
  • Service contract - temporary installation for servicing and field trials

The below table gives the full specifications for each resistor model available including the Cynergy3 IWPT series:

Cynergy3 IWPT series specifications

£0.00 Ex Tax: £0.00

Emerson Paine™ 210-60-090 Series

The Paine™ 210-60-090 differential pressure transducer series from Emerson offers measuring pressure ranges from ±500 PSID up to ±5000 PSID all in a small size. The 210-60-090 from Emerson is built with two separate sensing elements to measure the pressure at the input ports. This device has a very low thermal shift of ±0.01% of full scale per °C in the toughest environments and provides a differential output along with a uniquely small design. This transducer series is ideal for measuring differential pressure in many applications, such as actuator position feedback from servo valves to automotive and aviation testing environments.

  • Differential pressure transducer
  • Pressure ranges available from ±500 PSID up to ±5000 PSID
  • Compensated temperature −23°C to +121°C
  • Small, lightweight manifold style mounting for easy installation
  • Accuracy of P1=2mV/V ±10% and P2=P1 ±2% of P1
  • Output of mV/V
  • Operating media of any compatible with 300 series CRES, Buna-N-Rubber, 2024-T351 AL and PH CRES
  • Very low thermal sensitivity shift of ±0.01% of F.S. per °C
  • Temperature compensated design provides highly accurate pressure measurements
  • Shock and vibration resistant design offers highly accurate and reliable pressure monitoring in many operating conditions
  • Durable solution withstands harsh environments for long-lasting performance
  • Custom electrical connection and pressure port adapters are available on request

Potential applications for the Paine™ 210-60-090 series include:

  • Test stands and measurements
  • Robotic hydraulic controls
  • Industrial process systems
  • Positioning systems
  • Valve pressure control

Please see below the pressure table for the Paine™ 210-60-090 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine 210-60-090 Specifications

£0.00 Ex Tax: £0.00

Emerson Paine™ 210-65-010 Series

The Paine™ 210-60-090 differential pressure transducer series from Emerson offers measuring pressure ranges from ±500 PSID up to ±5000 PSID. This transducer comes with two separate sensing elements to measure differential pressure at the input ports. This device is shock and vibration resistant, produces highly accurate measurements in harsh and demanding conditions. The 210-65-010 differential pressure transducer from Emerson is engineered to provide differential measurements in fire-resistant Skydrol® aviation hydraulic fluid applications.

  • Differential pressure transducer
  • Pressure ranges available from ±500 PSID up to ±5000 PSID
  • Compensated temperature −23°C to +121°C
  • Accuracy of P1 = 2.0mV/V (±10%) and P2 = P1 (±2% of P1)
  • Output of mV/V
  • Small, lightweight manifold style mounting for easy installation
  • Skydrol® aviation hydraulic fluid compatible
  • Very low Thermal sensitivity shift of ±0.01% of F.S. per °C
  • Shock and vibration resistant design offers highly accurate and reliable pressure monitoring in many operating conditions
  • Compact design for an easy-to-use differential measurement solution
  • Durable solution withstands harsh environments for long-lasting performance
  • Custom electrical connection and pressure port adapters are available on request

Potential applications for the Paine™ 210-60-090 series include:

  • Aviation and automotive test stands
  • Aerospace and aviation transportation motion simulators
  • Transportation steering control systems
  • Military weapon positioning systems
  • Actuators
  • Positioning systems

Please see below the pressure table for the Paine™ 210-65-010 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine 210-65-010 Specifications

£0.00 Ex Tax: £0.00

Emerson Paine™ 220-30-020 Series

As a fully submersible device, the Paine™ 220-30-020 subsea pressure and temperature transmitter from Emerson is a reliable solution for pressure and temperature measurement in remote subsea systems. Offering pressure ranges of up to 15,000 PSIA and temperature measurements between -4°C up to +60°C, Emerson's Paine™ transmitter also features digital measurement accuracy and utilises the industry-standard CANopen® digital subsea instrumentation interface. With an all-welded design, this transmitter offers long-term subsea operation and meets the requirements of API 17F / ISO 13628-6 and CiA® 443 (SIIS level-2 device).

  • Subsea pressure and temperature transmitter
  • Pressure ranges available up to 0 - 15,000 PSIA (0 to 1034 BAR)
  • Operating temperature −4°C to +60°C
  • Resolution of 16 bits minimum (0.08 PSI for 5,000 PSI full scale)
  • Intelligent CANopen® digital subsea instrumentation interface delivers high resolution and reliability
  • Accuracy of 0.1%
  • Output CANopen® fault tolerant
  • Features micro subconn® MCBH4F subsea connector and all welded construction
  • Meets API 17F / ISO 13628-6 and CIA 443 (SIIS Level 2 device) requirements
  • Engineered with ⅜ inch female autoclave port fitting to meet industry-standard application requirements
  • Transmitter designed for consistent performance and digital measurement accuracy
  • Customisation options available for fit-for-use designs

Potential applications for the Paine™ 220-30-020 series include:

  • Subsea production & controls systems
  • Remote / extreme pressure monitoring
  • Corrosive environment pressure monitoring
  • Submersible subsea applications
  • ROV's & AUV's
  • Subsea valves and manifolds

Please see the below pressure table for the Paine™ 220-30-020 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine 220-30-020 Specifications

£0.00 Ex Tax: £0.00

Emerson Paine™ 320-10-010 Series

Engineered to provide digital measurement accuracy, Emerson's Paine™ 320-10-010 high precision pressure and temperature transmitter series is an ideal solution for new tool designs and retrofits. This transmitter from Emerson comes with digital network flexibility as well as programmability, and is fully compensated and calibrated for pressure ranges of up to 30,000 PSIA. This durable device withstands extreme conditions and is an ideal choice for down-hole drilling pressure and temperature measurement at temperatures of −40°C to +155°C.

  • High precision pressure and temperature transmitter
  • Pressure ranges available from 0 - 5,000 PSIA up to 0 - 30,000 PSIA
  • Operating temperature range of −40°C to +155°C
  • Calibrated temperature range of +23°C to +150°C
  • Total error of digital pressure output 0.04% full scale
  • Programmable temperature output: °C or °F
  • Digital output options of RS-232, RS-485, Modbus, CANbus, CANopen & SPI
  • Resistant to highly corrosive media
  • Process media which are fluids and gases compatible with NO7718, solution annealed and aged to a maximum hardness of 40 HRC
  • Withstands harsh and extreme environments for durability in tough applications
  • Fully compensated and calibrated to offer exceptional accuracy across high pressure ranges
  • Digital network provides flexibility and programmability for varying applications
  • Customisation options available for fit-for-use designs

Potential applications for the Paine™ 320-10-010 series include:

  • Down-hole tools (MWD, LWD< wireline and more)
  • Offshore energy exploration
  • Artificial lift and subsea risers
  • Industrial control systems and automation

Please see the datasheet in the Technical Library tab for the for Paine™ 320-10-010 series, which includes details on standard products available as well as proof and burst pressure ratings.

£0.00 Ex Tax: £0.00

Merit Sensor 3000 Series

The 3000 series low pressure MEMS pressure sensing elements from Merit SensorTM  is ideal for OEM applications, offering available pressure ranges of between 5psi and 100psi. The sensors utilise a piezoresistive Wheatstone bridge in a design that anodically bonds glass to a chemically etched silicon diaphragm. This pressure sensor series offers an operating temperature of −40°C to +150°C and a full scale output range from 75mV to 150mV (depending on the pressure range). The 3000 series from Merit SensorTM products incorporate a proprietary Sentium® technology, developed to provide a best-in-class operating temperature range and superior stability.

  • Low pressure MEMS sensing elements
  • Pressure ranges available 5psi, 15psi, 30psi, 50psi and 100psi
  • Absolute and gauge options available
  • Operating temperature −40°C to +150°C
  • Typical full scale output (at 5V excitation) 75mV at 5psi, 125mV at 100psi, 150mV at 15psi, 30psi and 100psi
  • Impedance of 5kΩ (typical) or 3.5kΩ (optional)
  • Suitable for clean, dry air and non-corrosive gases media
  • Sawn wafer on tape in metal frame
  • Bridge options of open, half open and closed

Typical applications for the Merit SensorTM 3000 series include:

  • Industrial
  • Calibration devices
  • Pressure meters
  • Please see below the specifications for the Merit SensorTM 3000 series:

    Merit Sensor<sup>TM</sup> 3000 series Specifications

£0.00 Ex Tax: £0.00

Merit Sensor 5000 Series

The 5000 series high pressure MEMS sensing elements from Merit SensorTM is ideal for OEM applications, offering available pressure ranges of between 1,000psi and 10,000psi. The sensors utilise a piezoresistive Wheatstone bridge in a design that anodically bonds glass to a chemically etched silicon diaphragm. This pressure sensor series offers an operating temperature of −40°C to +150°C and a full scale output range of 125mV to 300mv (depending on the pressure range). The 5000 series from Merit SensorTM products incorporate a proprietary Sentium® technology, developed to provide a best-in-class operating temperature range and superior stability.

  • High Pressure MEMS sensing elements
  • Pressure ranges available 1,000psi, 3,000psi, 5,000psi and 10,000psi
  • Absolute pressure type
  • Operating temperature −40°C to +150°C
  • Typical full scale output (at 5V excitation) 125mV at 1,000psi, 180mV at 3,000psi, 200mV at 5,000psi and 1,000psi, 175mV at 500psi
  • Impedance of 5kΩ (typical) or 3.5kΩ (optional)
  • Suitable for clean, dry air and non-corrosive gases media
  • Sawn wafer on tape in metal frame
  • Bridge options of open, half open or closed
  • AEC-Q100 qualification available upon request

Typical applications for the Merit SensorTM 5000 series include:

  • Industrial
  • Aerospace
  • Automotive
  • Consumer
  • Medical
  • Please see below the specifications for the Merit SensorTM 5000 series:

    Merit Sensor<sup>TM</sup> 5000 series Specifications

£0.00 Ex Tax: £0.00