EV & Automotive

Thanks to our portfolio of industry-leading manufacturers, we are able to offer a wide selection of AEC-Q200 compliant resistors as well as some AEC-Q100 qualified sensors.

Our resistor range developed for automotive applications such as electric vehicle charging and battery management systems includes a selection of high-quality current sensing resistors and shunts by Isabellenhütte in addition to a variety of thin-film and metal-foil chip resistors by Susumu which are compliant to the automotive AEC-Q200 standard.

We also offer a range of sensor products meeting AEC-Q100 qualifications including foil thermocouple temperature sensors by RdF, pressure sensors by Merit Sensor, load cells from Stellar Technology and NVE’s smart magnetometer based on their TMR technology.

The IVT-S module from Isabellenhütte, is an innovative solution for battery management system applications. This plug-and-play sensor is ideal for precise current and voltage measurement and is widely used within the automotive industry.

EV & Automotive

SRT Microcéramique RF Power High Frequency Capacitor Series

MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique SMD High Voltage Class I Capacitors

High Voltage Class I SMD Capacitor
Capacitance from 0.1pF to 1µF
TCR of ± 30ppm with 0Vdc applied
Voltages from 1KV to 15KV
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

Datasheet

SRT Microcéramique SMD High Voltage Class II Capacitors

High Voltage Class II SMD Capacitor
Capacitance from 6.8pF to 10µF
TCR of ± 15% with 0Vdc applied
Voltages from 1kV to 15kV
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

Datasheet

SRT Microcéramique SMD High Voltage N2T Capacitors

High Voltage N2T SMD Capacitor
No piezoelectric efect, high current pulse discharge
Capacitance from 1pF to 3.3µF
Voltages from 1kV to 15kV
Operating temperatures of -55°C to +125°C
Available in stack or radial

Datasheet

SRT Microcéramique SMD Low Inductance Class II Capacitors

Low Inductance Class II Capacitor
Capacitance from 1.0 nF to 1.5 µF
Voltages from 6.3 V to 50 V
Operating temperatures of -55°C to +125°C
Inverted geometry reduces the ESL up to 60% to standard MLCC
Tested in accordance with CECC 32100 and AEC-Q200

Datasheet

SRT Microcéramique SMD Low Voltage Class I Capacitors

Low Voltage Class I SMD Capacitor
Capacitance from 0.1 pF to 820 nF
TCR of ± 30ppm with 0Vdc applied
Voltages from 10V to 1000V
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

Datasheet

SRT Microcéramique X7R Capacitor Series for Medical Applications

Ceramic chip ceramic capacitor
Highest quality and reliability, suitable for safety-critical medical applications
Dissipation factor maximum of 2.5% (except for 25V models with 3.5% maximum)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric withstanding voltage of 250% of rated voltage for 5s + 1s, 50mA maximum

SRT Microcéramique X7R Capacitor Stack Series

X7R capacitor stacks, ideal for input/output filtering in SMPS applications
Highest quality and reliability, suitable for safety-critical industries
Maximum dissipation factor of 2.5% at 1V_rms, 1kHz, 25°C
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less
Dielectric withstanding voltage of 2.5Un for 5s with 50mA maximum charging current

Stellar Technology PNC700 Series

General purpose, high accuracy pancake tension and compression load cell
Barometric compensation
Shock and vibration resistant
Low profile design
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Stellar Technology PNC710 Series

General purpose, high accuracy pancake tension and compression load cell
Barometric compensation
Shock and vibration resistant
Low profile design
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Stellar Technology PNC720 Series

General purpose, high accuracy pancake tension and compression load cell
Hysteresis of 0.08% FSO
Barometric compensation
Shock and vibration resistant
Low profile design
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Stellar Technology PNC770 Series

Low profile, lightweight and precise pancake load cell
Low off-axis sensitivity
Barometric compensation
Shock and vibration resistant
Compact size with integral base with integral cable
Life cycle of 10 million
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Stellar Technology PNC772 Series

Low profile, lightweight and precise pancake load cell
Low off-axis sensitivity
Barometric compensation
Shock and vibration resistant
Compact size with integral base and bolt-on flange electrical connector
Life cycle of 10 million
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.002% FSO/°F
Temperature effect on span ±0.002% Reading/°F
Zero balance ±1% FSO

Stellar Technology RDE900 Series

Shackle ready, rod end load cell
In line tension
Variety of thread combinations
Shock and vibration resistant
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.005% FSO/°F
Temperature effect on span ±0.005% Reading/°F
Zero balance ±1% FSO

Stellar Technology RDE905 Series

General purpose rod end compression and tension load cell
High off-axis capability of up to 20% of full scale loads
Variety of thread combinations available
Shock and vibration resistant
All welded stainless steel construction
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero of ±0.005% FSO/°F
Temperature effect on span ±0.005% Reading/°F
Zero balance ±1% FSO

Stellar Technology RDE915 Series

Compact, high capacity rod end compression and tension load cell
Environmentally sealed
Low defection
Shock and vibration resistant
High strength tool steel
5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
Temperature effect on zero ±0.005% FSO/°F
Temperature effect on span ±0.005% Reading/°F
Zero balance ±1% FSO

SRT Microcéramique RF Power High Frequency Capacitor Series

MLCC RF power, high frequency capacitors for RF instruments, lasers and similar applications
Highest quality and reliability, suitable for safety-critical industries
Dissipation factor under 5.10^-4 at 1V_rms and 1MHz for values ≤ 1000pF and under 5.10^-4 at 1V_rms and 1KHz for values > 1000pF
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric strength test performed per method 103 of EIA 198-2-E

SRT Microcéramique SMD High Voltage Class I Capacitors

High Voltage Class I SMD Capacitor
Capacitance from 0.1pF to 1µF
TCR of ± 30ppm with 0Vdc applied
Voltages from 1KV to 15KV
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

SRT Microcéramique SMD High Voltage Class II Capacitors

High Voltage Class II SMD Capacitor
Capacitance from 6.8pF to 10µF
TCR of ± 15% with 0Vdc applied
Voltages from 1kV to 15kV
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

SRT Microcéramique SMD High Voltage N2T Capacitors

High Voltage N2T SMD Capacitor
No piezoelectric efect, high current pulse discharge
Capacitance from 1pF to 3.3µF
Voltages from 1kV to 15kV
Operating temperatures of -55°C to +125°C
Available in stack or radial

SRT Microcéramique SMD Low Inductance Class II Capacitors

Low Inductance Class II Capacitor
Capacitance from 1.0 nF to 1.5 µF
Voltages from 6.3 V to 50 V
Operating temperatures of -55°C to +125°C
Inverted geometry reduces the ESL up to 60% to standard MLCC
Tested in accordance with CECC 32100 and AEC-Q200

SRT Microcéramique SMD Low Voltage Class I Capacitors

Low Voltage Class I SMD Capacitor
Capacitance from 0.1 pF to 820 nF
TCR of ± 30ppm with 0Vdc applied
Voltages from 10V to 1000V
Operating temperatures of -55°C to +125°C
Tested in accordance to CECC 32100 and AEC-Q200

SRT Microcéramique X7R Capacitor Series for Medical Applications

Ceramic chip ceramic capacitor
Highest quality and reliability, suitable for safety-critical medical applications
Dissipation factor maximum of 2.5% (except for 25V models with 3.5% maximum)
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 10⁴ MΩ or 100 Ohm-Farad whichever is less
Dielectric withstanding voltage of 250% of rated voltage for 5s + 1s, 50mA maximum

SRT Microcéramique X7R Capacitor Stack Series

X7R capacitor stacks, ideal for input/output filtering in SMPS applications
Highest quality and reliability, suitable for safety-critical industries
Maximum dissipation factor of 2.5% at 1V_rms, 1kHz, 25°C
Insulation resistance of 25°C/Un 10⁵ MΩ or 1000 Ohm-Farad whichever is less
Dielectric withstanding voltage of 2.5Un for 5s with 50mA maximum charging current