|
 |
| 450V-5KV ultra-precision high voltage dividers USVD series |
|
Type USVD Ultra-Precision Voltage Dividers have the very highest precision available in voltage dividers in the range of 450 Volts DC up to 2000 Volts DC.
|
450V-2KV input voltage ratings
2ppm/°C ratio TC
0.01% ratio tolerance
1000:1 and 100:1 voltage dividers |
|
|
|
|
 |
| 600V-48KV precision high voltage resistor MG series |
|
With a TC of 80ppm/°C combined with excellent long term stability, the MG series of high voltage resistors is ideal for high reliability applications such as X ray systems and medical electronics.
|
600V-48KV
200Ω-2,000MΩ
1.0% to 0.1% tol.
Operation to 225°C |
|
|
|
|
 |
| 1.5KV-5KV ultra-precision high voltage dividers HVD series |
|
HVD series ultra-precision voltage dividers are monolithic voltage dividers built with ceramic sandwich construction. These voltage dividers have ultra-precision performance in the range of 1500 volts DC to 5000 volts DC
|
1500V-5KV
5ppm/°C ratio TC
0.05% ratio tolerance
Ratio VC to 0.02ppm/V |
|
|
|
|
 |
| 2.5KV ultra-stable low TC high voltage resistors USF series |
|
The USF low TC ultra stable precision film resistors were developed to meet the requirements of increasing perfomance for resistors in high performance electronics.
|
2.5KV max voltage rating
50Ω-20MΩ
Zero nominal Temperature Coefficient
0.01% or 0.10% tolerance |
|
|
|
|
 |
| 300V - 6KV high ohmic / high voltage GST series |
|
The GST series of resistors provides excellent performance in a very small body size with resistance values up to 1Terra - ohm.
|
6KV max voltage rating ( untrimmed )
1MΩ-1TΩ
Non magnetic
0.5% - 10% tolerance |
|
|
|
|
 |
| 4KV-30KV precision high voltage resistors TG series |
|
This series is designed for high accuracy, high voltage systems where a low TC is required. TC of 25 ppm/°C from -55°C to +125°C, Resistance Range from 1M to 1,000M.
|
48KV Maximum voltage rating
1MΩ-1,000MΩ
25 ppm/°C temperature coefficient
225°C maximum operating temperature |
|
|
|
|
 |
| 5KV-15KV ultra-stable precision high voltage resistors USG series |
|
The USG series was introduced to optimize low temperature and long term stability performance. The specific resistances that are offered in each body size, have been selected for optimum performance.
|
5KV,10KV,and 15KV voltage rating
50MΩ-100MΩ
10 ppm/°C TC
0.025% typical load life stability |
|
|
|
|
 |
| 20KV precision high voltage divider networks THV series |
|
THV voltage divider networks provide tighter ratio temperature coefficients and ratio tolerances than have previously been available in standard high voltage products.
|
100MΩ& 200MΩ
10-25ppm/°C ratio TC
0.25-2% ratio tolerance
Voltage ratings of 10KV DC, 15KV DC or 20KV DC at +125°C. |
|
|
|
|
 |
| 32KV high voltage resistors MX series |
|
Designed for use in high performance laboratory and industrial high voltage applications. These devices are designed to work over the temperature range of 0°C to 70°C
|
7.5KV-32KV.
1MΩ-1,000MΩ
80 ppm/°C TC
1% to 10% tolerance |
|
|
|
|
Rhopoint Sourcing
