Omnimate Power

Omnimate Power

Rhopoint Components are a UK franchised design-in distributor for the Weidmüller Omnimate Power range including PCB terminal Blocks, plug-in connectors and panel feed through terminal blocks for industrial applications with a focus on power electronics. Power for high current up to 232A and voltage up to 1000V (IEC) or 230A at 600V (UL). The components are optimised for application-oriented design, efficient production and reliable application.

Weidmueller Signal Please click here to see the full range of the Weidmüller Omnimate products.


PCB plug-in connectors for power electronics, optimised for modern drive technologies, eg: motor starters, frequency converters and servo-controllers

  • Omnimate Power sets the new standard – with increased safety and innovative solutions such as the pluggable shield, integrated signal contacts and one-handed operation.
  • Application-oriented scalability: from the compact 4 mm² connector for 29 A (IEC) or 20 A (UL) up to the sturdy 16 mm² connector for 76 A (IEC) or 54 A (UL)
  • Unlimited usage up to 1,000 V (IEC) or 600 V (UL)
  • A variety of application optimised mounting options
Please click here to redirect you to the Weidmüller Omnimate Power PCB plug in connectors page.

Feedthrough terminals for devices are a universal solution to feed power through housing walls. Excellent for applications such as EMC filters, discrete-built inverters for drive systems and encapsulated devices.

  • A wide service portfolio for currents up to 232A and conductor cross-sections from 4mm² to 95mm² (AWG 4/0)
  • Different types of connections such as a castable soldering connection, cable lug bolt connection and service-free clamping yoke screw connection and PUSH IN spring connection
  • Structural shapes for horizontal or vertical outgoing cable
  • Ask about our individual solutions like colour and screw variations and block mounting.

Please click here to redirect you to the Weidmüller Omnimate Power Feedthrough terminals for devices page.


Show:
Sort By:

Weidmüller LLF 7.50/90V Series

The LLF 7.50/90V PCB terminal series from Weidmüller's Omnimate power range, offers a spring connection with direct push in technology and actuator. Designed with a conductor outlet direction of 90° and a choice from 2 up to 12 poles and a 7.5mm pitch. The LLF 7.50/90V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 12
  • Solder pin length of 5mm
  • Pitch of 7.5mm
  • Conductor outlet direction of 90°
  • Push in technology with actuator
  • Wire connection cross section from AWG 24 to AWG 8
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.5mm to 82.5mm depending on the number of poles required
  • Rated current for minimum number of poles 41A (IEC) and 35A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −40°C to +120°C

Typical applications for the LLF 7.50/90V series include:

  • Solar inverters
  • Frequency converters
  • Servo-controllers
  • Power Supplies

The below table gives the specifications of the Weidmüller LLF 7.50/90V PCB terminal series:

Weidmüller LLF 7.50/90V Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LLFS 7.50/180V Series

The LLFS 7.50/180V PCB terminal series from Weidmüller's Omnimate power range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180° and a choice from 2 up to 12 poles and a 7.5mm pitch. The LLFS 7.50/180V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 12
  • Solder pin length of 5mm
  • Pitch of 7.5mm
  • Conductor outlet direction of 180°
  • Push in technology
  • Wire connection cross section from AWG 24 to AWG 8
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.5mm to 82.5mm depending on the number of poles required
  • Rated current for minimum number of poles 41A (IEC) and 37A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −40°C to +120°C

The Sturdy, direct connection for extreme current and voltage requirements in all power electronics applications for the LLFS 7.50/180V series include:

  • Solar inverters
  • Frequency converters
  • Servo-controllers
  • Power Supplies

The below table gives the specifications of the Weidmüller LLFS 7.50/180V PCB terminal series:

Weidmüller LLFS 7.50/180V Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LU 10.16/90 Series

The LU 10.16/90 PCB terminal series from Weidmüller's Omnimate power range, offers a clamping yoke screw connection. Designed with a conductor outlet direction of 90° and a choice from 2 up to 10 poles and a 10.16mm pitch. The LU 10.16/90 series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 10
  • Solder pin length of 4.5mm
  • Pitch of 10.16mm
  • Conductor outlet direction of 90°
  • Clamping yoke screw connection
  • Wire connection cross section from AWG 22 to AWG 8
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 10.16mm to 91.44mm depending on the number of poles required
  • Rated current for minimum number of poles 76A (IEC) and 65A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LU 10.16/90 PCB terminal series:

Weidmüller LU 10.16/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LUF 10.00/90V Series

The LUF 10.00/90V PCB terminal series from Weidmüller's Omnimate power range, offers a spring connection with direct push in technology and actuator. Designed with a conductor outlet direction of 90° and a choice from 2 up to 12 poles and a 10mm pitch. The LLF 10.00/90V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 12
  • Solder pin length of 5mm
  • Pitch of 10mm
  • Conductor outlet direction of 90°
  • Push in technology with actuator
  • Wire connection cross section from AWG 18 to AWG 6
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 10mm to 110mm depending on the number of poles required
  • Rated current for minimum number of poles 76A (IEC) and 58A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −40°C to +120°C

The below table gives the specifications of the Weidmüller LUF 10.00/90V PCB terminal series:

Weidmüller LUF 10.00/90V Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LUF 15.00/90V Series

The LUF 15.00/90V PCB terminal series from Weidmüller's Omnimate power range, offers a spring connection with direct push in technology and actuator. Designed with a conductor outlet direction of 90° and a choice from 2 up to 8 poles and a 15mm pitch. The LUF 15.00/90V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 5mm
  • Pitch of 15mm
  • Conductor outlet direction of 90°
  • Push in technology with actuator
  • Wire connection cross section from AWG 18 to AWG 4
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 15mm to 105mm depending on the number of poles required
  • Rated current for minimum number of poles 68A (IEC) and 58A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −40°C to +120°C

The Study, direct connections for extreme current and voltage requirements in all power applications for the LLFS 15.00/90V series include:

  • Solar inverters
  • Frequency converters
  • Servo-controllers
  • Power Supplies

The below table gives the specifications of the Weidmüller LUF 10.00/90V PCB terminal series:

Weidmüller LUF 15.00/90V Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LUFS 10.00/180V Series

The LUFS 10.00/180V PCB terminal series from Weidmüller's Omnimate power range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180° and a choice from 2 up to 12 poles and a 10mm pitch. The LUFS 10.00/180V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 12
  • Solder pin length of 5mm
  • Pitch of 10mm
  • Conductor outlet direction of 180°
  • Push in technology
  • Integrated test point for PS2.0 test plug
  • Wire connection cross section from AWG 18 to AWG 4
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 10mm to 110mm depending on the number of poles required
  • Rated current for minimum number of poles 76A (IEC) and 57A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −40°C to +120°C

The Sturdy, direct connection for extreme current and voltage requirements in all power electronics applications for the LUFS 10.00/180V series include:

  • Solar inverters
  • Frequency converters
  • Servo-controllers
  • Power supplies

The below table gives the specifications of the Weidmüller LUF 10.00/180V PCB terminal series:

Weidmüller LUFS 10.00/180V Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LUFS 15.00/180V Series

The LUFS 15.00/180V PCB terminal series from Weidmüller's Omnimate power range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180° and a choice from 2 up to 8 poles and a 15mm pitch. The LUFS 15.00/180V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 5mm
  • Pitch of 15mm
  • Conductor outlet direction of 180°
  • Push in technology without actuator
  • Wire connection cross section from AWG 18 to AWG 4
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 15mm to 105mm depending on the number of poles required
  • Rated current for minimum number of poles 76A (IEC) and 57A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −40°C to +120°C

The Sturdy, direct connection for extreme current and voltage requirements in all power electronics applications for the LUFS 15.00/180V series include:

  • Solar inverters
  • Frequency converters
  • Servo-controllers
  • Power supplies

The below table gives the specifications of the Weidmüller LUFS 15.00/180V PCB terminal series:

Weidmüller LUFS 15.00/180V Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LX 15.00/90 Series

The  LX 15.00/90 PCB terminal series from Weidmüller's Omnimate power range, offers a clamping yoke screw connection. Designed with a conductor outlet direction of 90° and a choice from 1 up to 9 poles and a 15mm pitch. The  LX 15.00/90 series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 1 to 9
  • Solder pin length of 4.5mm
  • Pitch of 15mm
  • Conductor outlet direction of 90°
  • Clamping yoke connection
  • Wire connection cross section from AWG 16 to AWG 4
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 0mm to 135mm depending on the number of poles required
  • Rated current for minimum number of poles 101A (IEC) and 85A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LX 15.00/90 PCB terminal series:

Weidmüller LX 15.00/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00