Audio

Audio

Our range for Audio industry includes:

  • A variety of chip thin film resistors dedicated to audio applications by Susumu. These include 4-terminal resistors from the KRL series, ideal for applications where use of low EMF components is required, as well as RS series, offering an improved low noise specification
  • A range of precision wirewound resistors by General Resistance. Some of our most popular products, these resistors are available in any resistance value and offer tight tolerances
  • A wide range of Junction Field Effect Transistors (JFETs) such as amplifiers, differential amplifiers, mixers etc. from InterFET Corporation. Continually pushing the performance limits of technology, we can offer over one of the broadest ranges of JFETs on the market, including over 18 different design geometries and over 2000 different parts, with customisation options available. Do not hesitate to Contact us for more information.
Show:
Sort By:

General Resistance 5G10 Mini-Ohm Series

The 5G10 Mini-Ohm wirewound axial leaded through-hole resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 10Ω up to 200kΩ. The 5G10 Mini-Ohm series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 5G10 Mini-Ohm series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound axial leaded precision resistor
  • Available in any resistance between 10Ω and 200kΩ including custom values
  • Stocked in many standard resistance values here at Rhopoint Components
  • Small axial leaded through-hole package
  • Excellent stability of ±50ppm/yr
  • Noise levels so small they are immeasurable
  • Wire gauge of 24AWG (0.4mm)
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 175V
  • Power rating of 0.2W (at +85°C, 5G10D model) and 0.125W (at +85°C, 5G10A model)
  • Maximum rated operating temperature +85°C
  • Working temperature from -55°C up to +160°C

The General Resistance ultra-precision wirewound axial leaded resistor series have been used for over 50 years in precision measurement instruments by manufacturers around the world, and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time.

The 5G10 Mini-Ohm series offers ultra-precision in a small compact through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

Any custom resistance value can be produced with a low minimum order requirement of 10 pcs for non standard product.

The below table gives the full specifications for each resistor model available in the General Resistance wirewound resistor range including the 5G10 Mini-Ohm series:

General Resistance 5G10 Specifications

✝ The 8G24 series has been made obsolete. Some older stock may be available in some instances, please contact us for further details
* For other tolerances, please contact us
** All leads are tinned copper

£0.00 Ex Tax: £0.00

General Resistance 8G16 Econistor Series

The 8G16 Econistor wirewound axial leaded through-hole resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 1Ω up to 699kΩ. The 8G16 Econistor series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 8G16 Econistor series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound axial leaded precision resistor
  • Available in any resistance between 1Ω and 699kΩ including custom values
  • Stocked in many standard resistors and RTD simulation values here at Rhopoint Components
  • Wire gauge of 20AWG (0.6mm)
  • Excellent stability of ±35ppm/yr
  • Noise levels so small they are immeasurable
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 200V
  • Power rating of 0.33W (at +85°C, 8G16D model) or ≈0.2W (at +85°C, 8G16A model)
  • Maximum rated operating temperature +85°C
  • Working temperature from -55°C up to +160°C

The General Resistance ultra-precision wirewound resistors have been used for over 50 years in precision measurement instruments by manufacturers around the world, and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time.

The 8G16 Econistor series are the ideal solution for test and measurement applications including RTD temperature simulation resistors and test and calibration equipment. We stock 21 Pt100 simulation resistance values as standard here at Rhopoint Components, with temperatures from -100°C up to +400°C.

Any custom resistance value can be produced with a low minimum order requirement of 10 pcs for non standard product, this includes additional RTD simulation values that are not standard stocked items.

The below table gives the full specifications for each resistor model available in the General Resistance wirewound resistor range including the 8G16 Econistor series:

General Resistance 8G16 Specifications

✝ The 8G24 series has been made obsolete. Some older stock may be available in some instances, please contact us for further details
* For other tolerances, please contact us
** All leads are tinned copper

£0.00 Ex Tax: £0.00

General Resistance GG102 Squaristor Series

The GG102 Squaristor wirewound radial leaded through-hole resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 10Ω up to 200kΩ. The GG102 Squaristor series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the GG102 Squaristor series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound radial leaded precision resistor
  • Available in any resistance between 10Ω and 200kΩ including custom values
  • Small radial leaded through-hole package
  • Wire gauge of 22AWG (0.6mm)
  • Excellent stability of ±35ppm/yr
  • Noise levels so small they are immeasurable
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 150V
  • Power rating of 0.3W (at +85°C, GG102D model) and ≈0.18W (at +85°C, GG102A model)
  • Maximum rated operating temperature +85°C
  • Working temperature from -55°C up to +160°C

The General Resistance ultra-precision wirewound resistor series have been used for over 50 years in precision measurement instruments by manufacturers around the world, and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time.

The GG102 Squaristor series offers ultra-precision in a small compact radial leaded through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

Any custom resistance value can be produced with a low minimum order requirement of 10 pcs for non standard product (30 pc minimum order quantity for standard parts).

The below table gives the full specifications for each resistor model available in the General Resistance wirewound resistor range including the GG102 Squaristor series:

General Resistance GG102 Specifications

✝ The 8G24 series has been made obsolete. Some older stock may be available in some instances, please contact us for further details
* For other tolerances, please contact us
** All leads are tinned copper

£0.00 Ex Tax: £0.00

Susumu KRL11050T4 Series

The KRL11050T4 series of 4-terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures up to +155°C and are ideal for use in applications that require the use of low EMF components. The KRL11050T4 series uses metal foil technology which enables a very stable TCR at a low resistance value ranging from 0.001Ω up to 0.5Ω and the face down mounting allows for accurate high current measurement.

  • Surface-mount 4-terminal metal foil low resistance chip resistor
  • 4-terminal pad pattern for current sensing applications
  • Separated voltage terminal for precise measurement of voltage
  • Resistance values range from 0.001Ω to 0.5Ω
  • Resistance value series E-6
  • Power rating of 5W
  • Tolerance values available are ±1% (F), ±2% (G) and ±5% (J) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 4320
  • Operating temperature range are −55°C to +155°C low EMF
  • Certified AEC-Q200 compliant

The Susumu KRL11050T4 series of 4-terminal metal foil low resistance chip resistor series are ideal for high power and high volume applications such as the following:

  • Automotive electronics
  • Industrial measurement instrumentation/equipment
  • Smartphones, mobile phones
  • PCs, HDD
  • Power devices
  • Inverters
  • Audio visual equipment

The below table gives the full specifications of the Susumu KRL series including the KRL11050T4:

Susumu KRL11050T4 Specifications

*1 We can meet your requirement of less than 0.0001Ω, please contact us for further details
*2 We can meet your requirement of resistance value outside of E-6 series, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL3216T4 Series

The KRL3216T4 series of 4-terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures up to +155°C and are ideal for use in applications that require the use of low EMF components. The KRL3216T4 series uses metal foil technology which enables a very stable TCR at a low resistance value ranging from 0.001Ω up to 0.5Ω and the face down mounting allows for accurate high current measurement.

  • Surface-mount 4-terminal metal foil low resistance chip resistor
  • 4-terminal pad pattern for current sensing applications
  • Separated voltage terminal for precise measurement of voltage
  • Resistance values range from 0.001Ω up to 0.5Ω
  • Resistance value series E-6
  • Power rating of 1W
  • Tolerance values available are ±1% (F), ±2% (G) and ±5% (J) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 1206
  • Operating temperature range is −55°C to +155°C
  • Certified AEC-Q200 compliant

The Susumu KRL3216T4 series of 4-terminal metal foil low resistance chip resistor are ideal for high power and high volume applications such as the following:

  • Automotive electronics
  • Industrial measurement instrumentation/equipment
  • Smartphones, mobile phones
  • PCs, HDD
  • Power devices
  • Inverters
  • Audio visual equipment

The below table gives the full specifications of the Susumu KRL Series including the KRL3216T4:

Susumu KRL3216T4 Specifications

*1 We can meet your requirement of less than 0.0001Ω, please contact us for further details
*2 We can meet your requirement of resistance value outside of E-6 series, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL6432T4 Series

The KRL6432T4 series of 4-terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures up to +155°C and are ideal for use in applications that require the use of low EMF components. The KRL6432T4 series uses metal foil technology which enables a very stable TCR at low resistance value ranging from 0.001Ω up to 0.5Ω and the face down mounting allows for accurate high current measurement.

  • Surface-mount 4-terminal metal foil low resistance chip resistor
  • 4-terminal pad pattern for current sensing applications
  • Separated voltage terminal for precise measurement of voltage
  • Resistance values range from 0.001Ω up to 0.5Ω
  • Resistance value series E-6
  • Power rating of 2W
  • Tolerance values available are ±1% (F), ±2% (G) and ±5% (J) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 2512
  • Operating temperature range is −55°C to +155°C
  • Certified AEC-Q200 compliant

The Susumu KRL6432T4 series of 4-terminal metal foil low resistance chip resistors are ideal for high power and high volume applications such as the following:

  • Automotive electronics
  • Industrial measurement instrumentation/equipment
  • Smartphones, mobile phones
  • PC's, HDD,
  • Power devices
  • Inverters
  • Audio visual equipment

The below table gives the full specifications of the Susumu KRL series including the KRL6432T4:

Susumu KRL6432T4 Specifications

*1 We can meet your requirement of less than 0.0001Ω, please contact us for further details
*2 We can meet your requirement of resistance value outside of E-6 series, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL7638T4 Series

The KRL7638T4 series of 4-terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures up to +155°C and are ideal for use in applications that require the use of low EMF components. The KRL7638T4 series uses metal foil technology which enables a very stable TCR at low resistance value ranging from 0.001Ω up to 0.5Ω and the face down mounting allows for accurate high current measurement.

  • Surface-mount 4-terminal metal foil low resistance chip resistor
  • 4-terminal pad pattern for current sensing applications
  • Separated voltage terminal for precise measurement of voltage
  • Resistance values range from 0.001Ω up to 0.5Ω
  • Resistance value series E-6
  • Power rating of 3W
  • Tolerance values available are ±1% (F), ±2% (G) and ±5% (J) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 3015
  • Operating temperature range is −55°C to +155°C
  • Certified AEC-Q200 compliant

The Susumu KRL7638T4 series of 4-terminal metal foil low resistance chip resistors are ideal for high power and high volume applications such as the following:

  • Automotive electronics
  • Industrial measurement instrumentation/equipment
  • Smartphones, mobile phones
  • PCs, HDD
  • Power devices
  • Inverters
  • Audio visual equipment

The below table gives the full specifications of the Susumu KRL series including the KRL7638T4:

Susumu KRL7638T4 Specifications

*1 We can meet your requirement of less than 0.0001Ω, please contact us for further details
*2 We can meet your requirement of resistance value outside of E-6 series, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu KRL9045T4 Series

The KRL9045T4 series of 4-terminal metal foil low resistance chip resistors from Susumu have been developed to withstand high operating temperatures up to +155°C and are ideal for use in applications that require the use of low EMF components. The KRL9045T4 series uses metal foil technology which enables a very stable TCR at low resistance value ranging from 0.001Ω up to 0.5Ω and the face down mounting allows for accurate high current measurement.

  • Surface-mount 4-terminal metal foil low resistance chip resistor
  • 4-terminal pad pattern for current sensing applications
  • Separated voltage terminal for precise measurement of voltage
  • Resistance values range from 0.001Ω up to 0.5Ω
  • Resistance value series E-6
  • Power rating of 4W
  • Tolerance values available are ±1% (F), ±2% (G) and ±5% (J) (depending on the resistance value required)
  • TCR values available are ±50 ppm°C (Q) and ±100 ppm/°C (R) (depending on the resistance value required)
  • Chip size 3518
  • Operating temperature range is −55°C to +155°C
  • Certified AEC-Q200 compliant

The Susumu KRL9045T4 series of 4-terminal metal foil low resistance chip resistors are ideal for high power and high volume applications such as the following:

  • Automotive electronics
  • Industrial measurement instrumentation/equipment
  • Smartphones, mobile phones
  • PCs, HDD
  • Power devices
  • Inverters
  • Audio visual equipment

The below table gives the full specifications of the Susumu KRL series including the KRL9045T4:

Susumu KRL9045T4 Specifications

*1 We can meet your requirement of less than 0.0001Ω, please contact us for further details
*2 We can meet your requirement of resistance value outside of E-6 series, please contact us for further details

£0.00 Ex Tax: £0.00

Susumu RS1005 Series

The RS1005 high precision audio thin film chip resistor series from Susumu with an improved low noise specification making them ideal for high quality audio equipment applications. Susumu RS1005 series has a chip size of 0402 with resistance values between 47Ω and 100kΩ, tolerance options available of ±0.1% (B) and ±0.5% (D) and a TCR of ±25 ppm/°C (P) . In order to offer the best solution for your application, you will get a choice of resistors with the same resistance value and chip size according to your sound preference so you can select the best sounding resistor.

  • Surface-mount high precision audio thin film chip resistor
  • Resistance range between 47Ω and 100kΩ available
  • Resistance value series E-6
  • Power rating options of 0.03125W or 0.0625W
  • Tolerance values available ±0.1% (B) and ±0.5% (D)
  • TCR values available ±25 ppm/°C (P)
  • Maximum voltage of 75V
  • Operating temperature range of −55°C to +155°C
  • Selection of resistors offered to find best sounding resistor
  • AEC-Q200 compliant
  • Chip size of 0402

Susumu RS1005 series high precision audio thin film chip resistors are ideal for the following applications:

  • High quality audio equipment
  • Automotive audio equipment
  • Mobile audio equipment and smartphones

The below table gives the full specifications of the Susumu RS series including the RS1005:

Susumu RS1005 Specifications

Please see the Susumu selection guide in the Technical Library tab for the E-6 values

£0.00 Ex Tax: £0.00

Susumu RS2012 Series

The RS2012 high precision audio thin film chip resistor series from Susumu have an improved low noise specification making them ideal for high quality audio equipment applications. The Susumu RS2012 series has a chip size of 0805 with resistance values between 47Ω and 100kΩ, with tolerance options available of 0.1% (B) and ±0.5% (D) and a TCR of ±25 ppm/°C (P) . In order to offer the best solution for your application, you will get a choice of resistors with the same resistance value and chip size according to your sound preference so you can select the best sounding resistor.

  • Surface-mount high precision audio thin film chip resistor
  • Resistance range between 47Ω and 100kΩ available
  • Resistance value series E-6
  • Power rating options of 0.1W or 0.125W
  • Tolerance values available ±0.1% (B) and ±0.5% (D)
  • TCR values available ±25 ppm/°C (P)
  • Maximum voltage of 150V
  • Operating temperature range of −55°C to +155°C
  • Selection of resistors offered to find best sounding resistor
  • AEC-Q200 compliant
  • Chip size of 0805

Susumu RS2012 series high precision audio thin film chip resistors are ideal for the following applications:

  • High quality audio equipment
  • Automotive audio equipment
  • Mobile audio equipment and smartphones

The below table gives the full specifications of the Susumu RS series including the RS2012:

Susumu RS2012 Specifications

Please see the Susumu selection guide in the Technical Library tab for the E-6

£0.00 Ex Tax: £0.00

General Resistance 5E10 Mini-Ohm Series

The 5E10 Mini-Ohm wirewound axial leaded through-hole resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 10Ω up to 200kΩ. The 5E10 Mini-Ohm series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 5E10 Mini-Ohm series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound axial leaded precision resistor
  • Available in any resistance between 10Ω and 200kΩ including custom values
  • Stocked in many standard resistance values here at Rhopoint Components
  • Small axial leaded through-hole package
  • Excellent stability of ±50ppm/yr
  • Noise levels so small they are immeasurable
  • Wire gauge of 24AWG (0.4mm)
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 175V
  • Power rating of 0.2W (at +85°C, 5E10D model) and 0.125W (at +85°C, 5E10A model)
  • Maximum rated operating temperature +85°C
  • Working temperature from -55°C up to +160°C

The General Resistance ultra-precision wirewound axial leaded resistor series have been used for over 50 years in precision measurement instruments by manufacturers around the world, and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time.

The 5E10 Mini-Ohm series offers ultra-precision in a small compact through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

Any custom resistance value can be produced with a low minimum order requirement of 10 pcs for non standard product (30 pc minimum order quantity for standard parts).

The below table gives the full specifications for each resistor model available in the General Resistance wirewound resistor range including the 5E10 Mini-Ohm series:

General Resistance 5E10 Specifications

✝ The 8G24 series has been made obsolete. Some older stock may be available in some instances, please contact us for further details
* For other tolerances, please contact us
** All leads are tinned copper

£0.00 Ex Tax: £0.00

General Resistance 8E16 Econistor Series

The 8E16 Econistor wirewound axial leaded through-hole resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 1Ω up to 699kΩ. The 8E16 Econistor series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 8E16 Econistor series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound axial leaded precision resistor
  • Available in any resistance between 1Ω and 699kΩ including custom values
  • Stocked in many standard resistors and RTD simulation values here at Rhopoint Components
  • Wire gauge of 20AWG (0.6mm)
  • Excellent stability of ±35ppm/yr
  • Noise levels so small they are immeasurable
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 200V
  • Power rating of 0.33W (at +85°C, 8E16D model) or ≈0.2W (at +85°C, 8E16A model)
  • Maximum rated operating temperature +85°C
  • Working temperature from -55°C up to +160°C

The General Resistance ultra-precision wirewound resistors have been used for over 50 years in precision measurement instruments by manufacturers around the world, and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time.

The 8E16 Econistor series are the ideal solution for test and measurement applications including RTD temperature simulation resistors and test and calibration equipment. We stock 21 Pt100 simulation resistance values as standard here at Rhopoint Components, with temperatures from -100°C up to +400°C.

Any custom resistance value can be produced with a low minimum order requirement of 10 pcs for non standard product, this includes additional RTD simulation values that are not standard stocked items (30 pc minimum order quantity for standard parts).

The below table gives the full specifications for each resistor model available in the General Resistance wirewound resistor range including the 8E16 Econistor series:

General Resistance 8E16 Specifications

✝ The 8G24 series has been made obsolete. Some older stock may be available in some instances, please contact us for further details
* For other tolerances, please contact us
** All leads are tinned copper

£0.00 Ex Tax: £0.00

General Resistance GR102 Squaristor Series

The GR102 Squaristor wirewound radial leaded through-hole resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 10Ω up to 200kΩ. The GR102 Squaristor series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the GR102 Squaristor series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound radial leaded precision resistor
  • Available in any resistance between 10Ω and 200kΩ including custom values
  • Small radial leaded through-hole package
  • Wire gauge of 22AWG (0.6mm)
  • Excellent stability of ±35ppm/yr
  • Noise levels so small they are immeasurable
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 150V
  • Power rating of 0.3W (at +85°C, GR102D model) and ≈0.18W (at +85°C, GR102A model)
  • Maximum rated operating temperature +85°C
  • Working temperature from -55°C up to +160°C

The General Resistance ultra-precision wirewound resistor series have been used for over 50 years in precision measurement instruments by manufacturers around the world, and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time.

The GR102 Squaristor series offers ultra-precision in a small compact radial leaded through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

Any custom resistance value can be produced with a low minimum order requirement of 10 pcs for non standard product (30 pc minimum order quantity for standard parts).

The below table gives the full specifications for each resistor model available in the General Resistance wirewound resistor range including the GR102 Squaristor series:

General Resistance GR102 Specifications

✝ The 8G24 series has been made obsolete. Some older stock may be available in some instances, please contact us for further details
* For other tolerances, please contact us
** All leads are tinned copper

£0.00 Ex Tax: £0.00