DGH D5100 Multichannel DAQ Analog Voltage Input Module Series

DGH D5100 Multichannel DAQ Analog Voltage Input Module  Series

The D5100 voltage input module is part of the DGH's D5000 low cost multichannel data acquisition module family. This input module converts voltage input signal from the choice of five different voltage ranges (±100mV, ±1V, ±5V, ±10V and ±100V) and continuously converts the data at the rate of 8 conversions per second, then converts the digital data to engineering units using the lookup tables, storing the latest data in the buffer. The data can be retrieved by sending an ASCII command from the host computer. The D5100 voltage input module supports four channels isolated input to output, but not isolated channel to channel. For extra security, it utilises a non-volatile EEPROM (Electrically Erasable Programmable Read Only Memory) to store all user-selectable settings, meaning the values are maintained in the event of power loss. The D5100 comes pre-set with default values of 300 baud, one start bit, eight data bits, one stop bit, no parity and any address recognized, but these values can be easily changed by the user. The modules are designed to be compatible with all popular computers utilising RS-232 or RS-485 port and no software is necessary to start using them, although the utility software is provided. The D5100 can be mounted on a DIN-rail if required (MK-1 mounting kit required) and can be combined with other D5000 series modules to build a low cost data logger or a data acquisition system for given application.

  • Analog-to-digital voltage input module
  • Choice of RS-232 or RS-485 output
  • Choice of 5 different ranges: ±100mV, ±1V, ±5V, ±10V and ±100V
  • Communicates using ASCII protocol
  • User-selectable features include analog input range, baud rate, parity type and others
  • Accuracy: +/-0.02% of full scale
  • Resolution: 0.01% of full scale
  • Span temperature coefficient: ±50ppm/°C maximum
  • Input burnout protection to 250 Vac
  • Input impedance: ≤±1V input =100MΩ minimum and ≥±5V input =1MΩ minimum
  • 4 channels isolated input to output (not isolated channel to channel)
  • Programmable digital filter
  • Power requirements: Serial = 0.75W
  • Operating temperature -25°C to +70°C
  • Y2K compliant

The applications for the D5100 data acquisition modules include:

  • Process monitoring and control
  • Remote data logging to any host computer
  • Product testing
  • Direct connection to modems

Additional Features
  • 8 conversions per second
  • Accuracy: ±0.02% of FS maximum
  • Resolution: 0.01% of FS (4 digits)
  • Common mode rejection: 100dB at 50/60Hz
  • Autozero and Autocalibration
  • Input impedance of ≤±1V input =100MΩ minimum and ≥±5V input =1MΩ minimum
  • Operating temperature of -25°C to +70°C
  • 4 analog voltage inputs
  • 4 digital outputs with conversion to engineering units
Number of channels 4 channel
Power requirements
  • Unregulated +10V to +30Vdc
  • Serial 0.75W maximum
  • ±100mV
  • ±1V
  • ±5V
  • ±10V
  • ±100V

We are pleased to provide you with a range of additional content including videos, product datasheets, case studies, white papers and application notes for your reference. Please see below for the latest content available:



PDF Document DGH D5000 Series Datasheet
PDF Document DGH D5000 Series User Manual
PDF Document Command set for D5000 Series
PDF Document Connection Diagram for D5000 series

This product is available fully compliant to the RoHS EU directive 2002/95/EC.

  • Views: 1218
  • Product Code: DGH D5100 Multichannel DAQ Analog Voltage Input Module
  • SKU: DGH D5100 Multichannel DAQ Analog Voltage Input Module
  • Availability: In Stock
0 Product(s) Sold
  • £0.00
  • Ex Tax: £0.00

Available Options

Tags: D5000, D5100, D5111, D5112, D5121, D5122, D5131, D5132, D5141, D5142, D5151, D5152