Cement series

Supporting Manufacturer Information


  • RARA
  • Metal clad thick film resistor
  • Resistance range from 1kΩ to 2MΩ
  • Max power rating of 15W
  • Cement moulding within aluminium housing
  • Short time overload of 2 x power rating is 5 seconds
  • High stability at conventional power ratings
  • Temperature range of -55°C up to +250°C
  • RARA
  • Metal clad thick film resistor
  • Resistance range from 1kΩ to 2MΩ
  • Max power rating of 25W
  • Cement moulding within aluminium housing
  • Short time overload of 2 x power rating is 5 seconds
  • High stability at conventional power ratings
  • Temperature range of -55°C up to +250°C
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.1kΩ
  • Power rating of 100W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.75kΩ
  • Power rating of 150W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.2kΩ
  • Power rating of 200W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.79kΩ
  • Power rating of 250W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 3.5kΩ
  • Power rating of 300W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 4.45kΩ
  • Power rating of 400W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 5.78kΩ
  • Power rating of 500W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series
  • RARA
  • Flat and narrow type metal clad wire wound resistor
  • Cement or silicone filling material with an extruded aluminium housing
  • 300mm flying leads
  • Excellent heat dissipation
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
  • Short time overload of 5 x power rating is 5 seconds
  • RARA
  • Flat and narrow type metal clad wire wound resistor
  • Cement or silicone filling material with an extruded aluminium housing
  • 300mm flying leads
  • Excellent heat dissipation
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
  • Short time overload of 5 x power rating is 5 seconds
  • RARA
  • Flat and narrow type metal clad wire wound resistor
  • Cement or silicone filling material with an extruded aluminium housing
  • 300mm flying leads
  • Excellent heat dissipation
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
  • Short time overload of 5 x power rating is 5 seconds
  • RARA
  • Metal clad wire wound resistor
  • Resistance range between 0.27Ω and 25kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect
  • RARA
  • Metal clad wire wound resistor
  • Resistance range between 0.1Ω and 10kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect
  • RARA
  • Metal clad wire wound resistor
  • Resistance range between 0.68Ω and 50kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect
  • RARA
  • Metal clad wire wound resistor
  • Resistance range between 0.2Ω and 20kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect
Please be advised that due to the ongoing supply issues with raw materials affecting the global electronics industry, as well as an increase in orders received by our manufacturing partners, a large number of products are facing increased lead times in recent months. For the latest lead time and stock availability, please contact one of our engineers who will be happy to discuss lead times further and the potential for alternative parts.