![Rhopoint Components Logo Blue/Black (smaller version) [SVG]](https://www.rhopointcomponents.com/wp-content/uploads/2020/09/RC-logo-master.svg){kind=logo}
- Female plug in connector
- Rated current for minimum number of poles 17A (IEC) and 10A (UL)
- Dimensions of L1 3.5mm to 80.5mm (depending on the number of poles required)
- Clamping yoke screw connection
- Clamping range from 0.08mm² to 1.5mm²
- Wire connection cross section from AWG 28 to AWG 14
- Temperature range −50°C up to +100°C
- CSA and UL 1059 approved, IEC listed
- High current female plug in connector
- Rated current for minimum number of poles 23A (IEC) and 20A (UL)
- Dimensions of L1 5.08mm to 116.84mm (depending on the number of poles required)
- Clamping yoke screw connection
- Clamping range from 0.13mm² to 4mm²
- Wire connection cross section from AWG 30 to AWG 12
- Temperature range −50°C up to +100°C
- CSA and UL 1059 approved, IEC listed
- High power female plug in connector
- Rated current for minimum number of poles 78.3A (IEC) and 60A (UL)
- Dimensions of L1 10.16mm to 81.28mm (depending on the number of poles required)
- Clamping range from 0.2mm² to 16mm²
- Wire connection cross section from AWG 22 to AWG 6
- Temperature range −50°C up to +130°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 16A (IEC) and 10A (UL)
- Dimensions of L1 3.5mm to 5mm (depending on the number of poles required)
- SMT solder connection with a solder pin length of 3.2mm
- Wire connection cross section from AWG 28 to AWG 14
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 17.5A (IEC) and 15A (UL)
- Dimensions of L1 5.08mm to 119.84mm (depending on the number of poles required)
- SMT solder connection with a solder pin length of 3.5mm
- Wire connection cross section from AWG 24 to AWG 14
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 76A (IEC) and 65A (UL)
- Dimensions of L1 10.16mm to 91.44mm (depending on the number of poles required)
- THT solder connection with a solder pin length of 4.5mm
- Wire connection cross section from AWG 22 to AWG 8
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
- PCB terminal connector
- Rated current for minimum number of poles 101A (IEC) and 85A (UL)
- Dimensions of L1 0mm to 135mm (depending on the number of poles required)
- THT solder connection with a solder pin length of 4.5mm
- Wire connection cross section from AWG 16 to AWG 4
- Temperature range of −50°C to +120°C
- CSA and UL 1059 approved, IEC listed
Calculators and Converters
Work out what you need for your project. Go to calculators and convertors
