0402 series

  • Exxelia Ohmcraft
  • High Voltage SMD Resistors
  • Resistance range from 10kΩ to 1GΩ
  • Tolerances from ±1% to ±20%
  • TCR of ±50 ppm/°C, ±100 ppm/°C or ±200 ppm/°C
  • Power rating of 0.04W
  • Voltage rating of 150V
  • Temperature range from -55°C to +150°C
  • Exxelia Ohmcraft
  • Military Grade High Voltage SMD Resistors
  • Resistance range from 10kΩ to 1GΩ
  • Tolerances from ±1% to ±20%
  • TCR of ±50 ppm/°C, ±100 ppm/°C or ±200 ppm/°C
  • Power rating of 0.04W
  • Voltage rating of 150V
  • Temperature range from -55°C to +150°C
  • Exxelia Ohmcraft
  • High Ohmic SMD Resistors
  • Resistance range from 10kΩ to 1GΩ
  • Tolerances from ±1% to ±20%
  • TCR of ±50 ppm/°C, ±100 ppm/°C or ±200 ppm/°C
  • Power rating of 0.04W
  • Voltage rating of 150V
  • Temperature range from -55°C to +150°C
  • SRT Resistor Technology
  • Non-magnetic thick film chip resistor
  • Resistance range from 10Ω to 100GΩ
  • Tolerances from ±5.0% to ±30%
  • TCR from ±100 ppm/°C to ±3000 ppm/°C
  • Power rating of 0.05W (at +70°C)
  • Temperature range from -55°C to +155°C
  • SRT Resistor Technology
  • Non-magnetic thick film chip resistor
  • Resistance range from 1Ω to 10MΩ
  • Tolerances from ±1% to ±20%
  • TCR from ±50 ppm/°C to ±250 ppm/°C
  • Power rating of 0.05W (at +70°C)
  • Temperature range from -55°C up to +155°C
  • SRT Resistor Technology
  • High temperature, non-magnetic thick film chip resistor
  • Resistance range from 1Ω to 10MΩ
  • Tolerances from ±2% to ±20%
  • TCR from ±50 ppm/°C to ±250 ppm/°C
  • Power rating of 0.05W (at +70°C)
  • Temperature range from -55°C up to +300°C
  • SRT Resistor Technology
  • Non-magnetic thick film chip resistor
  • Resistance range from 10MΩ to 100GΩ
  • Tolerances from ±5% to ±30%
  • TCR from ±50 ppm/°C to ±3000 ppm/°C
  • Power rating of 0.05W (at +70°C)
  • Temperature range from -55°C up to +155°C
  • SRT Resistor Technology
  • High temperature, non-magnetic chip resistor
  • Resistance range from 10MΩ to 100GΩ
  • Tolerances from ±5% to ±30%
  • TCR from ±50 ppm/°C to ±3000 ppm/°C
  • Power rating of 0.05W (at +70°C)
  • Temperature range from -55°C up to +300°C
  • SRT Microcéramique
  • MLCC Capacitor for RF and Microwave communication
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 5.10-4 at 1Vrms and 1MHz for values ≤ 1000pF and under 5.10-4 at 1Vrms and 1KHz for values > 1000pF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • High Temperature, ultra stable MLCC Capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • High Temperature MLCC Capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Ultra stable ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Stable ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Non magnetic NP0 (Type 1) MLCC Capacitors
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Non magnetic X7R (Type 2) MLCC Capacitors
  • Highest quality and reliability, suitable for safety-critical industries
  • Dissipation factor maximum of 2.5% at 1Vrms and 1kHz for Un between 16V and 25V and maximum 1% at 1Vrms and 1kHz for Un between 25V and 50V
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric strength test performed per method 103 of EIA 198-2-E
  • SRT Microcéramique
  • Ultra stable ceramic capacitor
  • Highest quality and reliability, suitable for safety-critical medical applications
  • Dissipation factor maximum of 0.1% at 1Vrms and 1kHz (values under 1nF measured at 1MHz)
  • Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
  • Dielectric withstanding voltage of 250% of rated voltage for 5s + 1s, 50mA maximum